WN-GX300GR update log

公式ファームでのアップデートログ

==>fwChkHeader 
cmd.dataLen=3784990
Header OK!!
00000000: 0000 0000 0000 030a 0000 1056 3132 3300  ...........V123.
00000010: 0000 0000 0202 0100 0000 0000 0000 0004  ................
00000020: 0039 c11e 0000 0000 86af 3c1c 63b5 94d5  .9........<.c...
00000030: 2157 4aea b930 85fb 0d00 0000 f4bf 0408  !WJ..0..........
00000040: 71a4 0408 ffff ffff d6bd 0640 f4df 1d40  q..........@...@
00000050: 65be 0640 30f2 0040 0000 021e 1234 5678  e..@0..@.....4Vx

check CSRF: Pass
check CSRF: Pass
cmd [brctl setfd br0 0.1]
Stopping processmanager ...            OK
Stopping DDNS ...            OK
-----> LOG : DHCP, DHCP Server Stoping
Received a SIGTERM
Stopping DHCP server ...            cmd [cp /etc/udhcpd.leases /etc/udhcpd.leases.old &]
cmd [rm -f /etc/udhcpd.leases &]
Closing ntpclient ...            -----> LOG : UPnP, Stopping
select(): Interrupted system call
Stopping DDNS ...            OK
-----> LOG : WAN, Stopping
wanClose ...
Close WAN: eth3 ...
-----> LOG : WAN, stop DHCP mode
cmd [/sbin/wanmanager -m stop0]
cmd [ifconfig eth3   0.0.0.0   up]
cmd [ifconfig eth3 mtu 1500]
Stopping DNS Proxy ...            Stopping igmpProxy ...            cmd [iwpriv ra0 set IgmpSnEnable=0]
OK
cmd [rm -rf /var/sysconfd/*.sh]
fwDoUpgrade: using web
======= image type 4, len 3784990 
Erasing 4 Kibyte @ a4000 -- 17 % complete.my_ifwupgResult:[1]
Erased 3808 Kibyte @ 0 -- 100% complete.       
Data_size: 0x39c11e(3784990) device_size: 0x3b8000 sector_size: 0x1000
Sector: 0x39c000 (99%)
100%.
Finished.
OK
cmd [brctl setfd br0 0.1]
Stopping processmanager ...            OK
-----> LOG : DHCP, DHCP Server Stoping
Stopping DHCP server ...            -----> LOG : HTTP, Stopping
Stopping httpd server ...            OK
-----> LOG : WAN, Stopping
wanClose ...
Close WAN: eth3 ...
-----> LOG : WAN, stop DHCP mode
cmd [ifconfig eth3   0.0.0.0   up]
cmd [ifconfig eth3 mtu 1500]
-----> LOG : LAN, Stopping
cmd [/sbin/ifconfig br0 down]
[  624.480000] br0: port 2(ra0) entering forwarding state
[  624.484000] br0: port 1(eth2) entering forwarding state
cmd [brctl delif br0 eth2]
[  624.520000] device eth2 left promiscuous mode
[  624.524000] br0: port 1(eth2) entering disabled state
cmd [/sbin/ifconfig eth2 0.0.0.0]
cmd [iwpriv  set WscConfMode=0]
set       no private ioctls.

cmd [iwpriv ra0 set WscConfMode=0]
cmd [iwpriv ra0 set RadioOn=0]
[  625.748000] MTPciPollTxRxEmpty
[  626.368000] ==>Set_RadioOn_Proc (OFF)
cmd [brctl delif br0 ra0]
[  626.380000] device ra0 left promiscuous mode
[  626.384000] br0: port 2(ra0) entering disabled state
cmd [ifconfig ra0 down]
[  626.540000] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
[  626.548000] RTMPSetPiggyBack(933): Not support for HIF_MT yet!
[  626.556000] RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
[  626.564000] RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
[  626.568000] tx_kickout_fail_count = 0
[  626.572000] tx_timeout_fail_count = 0
[  626.576000] rx_receive_fail_count = 0
[  626.580000] alloc_cmd_msg = 92
[  626.584000] free_cmd_msg = 92
cmd [brctl delif br0 ra1]
brctl: iface ra1: No such device
cmd [ifconfig ra1 down]
ifconfig: SIOCGIFFLAGS: No such device
cmd [brctl delif br0 wds0]
brctl: iface wds0: No such device
cmd [ifconfig wds0 down]
ifconfig: SIOCGIFFLAGS: No such device
cmd [brctl delif br0 wds1]
brctl: iface wds1: No such device
cmd [ifconfig wds1 down]
ifconfig: SIOCGIFFLAGS: No such device
cmd [brctl delif br0 wds2]
brctl: iface wds2: No such device
cmd [ifconfig wds2 down]
ifconfig: SIOCGIFFLAGS: No such device
cmd [brctl delif br0 wds3]
brctl: iface wds3: No such device
cmd [ifconfig wds3 down]
ifconfig: SIOCGIFFLAGS: No such device
cmd [brctl delif br0 apcli0]
brctl: bridge br0: Invalid argument
cmd [ifconfig apcli0 down]
cmd [rmmod rt2860v2_ap]
[  626.740000] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
SW modules close completed
cmd [reboot &]
cmd [sync]
starting pid 8395, tty '': '/etc/reboot.sh'
cmd [sync]
cmd [sync]
starting pid 8407, tty '': '/etc/reboot.sh /sbin/swapoff -a'
The system is going down NOW!
FWM terminated!
Signal 15 received - terminating
Signal 15 received - terminating
Sending SIGKILL to all processes
Requesting system reboot
[  635.828000] Stopped WatchDog Timer.
[  635.832000] Restarting system.
広告

コメントを残す

以下に詳細を記入するか、アイコンをクリックしてログインしてください。

WordPress.com ロゴ

WordPress.com アカウントを使ってコメントしています。 ログアウト /  変更 )

Google フォト

Google アカウントを使ってコメントしています。 ログアウト /  変更 )

Twitter 画像

Twitter アカウントを使ってコメントしています。 ログアウト /  変更 )

Facebook の写真

Facebook アカウントを使ってコメントしています。 ログアウト /  変更 )

%s と連携中