BHR-4GRV

以前WXR-2533DHPを提供頂いた某氏より今回大量にルータを頂いたうちの一台。
ath79 targetへサポート追加してみるにあたってのメモ

U-Boot

  • help
    ar7240> help
    ?       - alias for 'help'
    TFTPS   - boot image via network as TFTP server
    base    - print or set address offset
    boot    - boot default, i.e., run 'bootcmd'
    bootd   - boot default, i.e., run 'bootcmd'
    bootelf - Boot from an ELF image in memory
    bootm   - boot application image from memory
    bootp   - boot image via network using BootP/TFTP protocol
    bootvx  - Boot vxWorks from an ELF image
    cmp     - memory compare
    coninfo - print console devices and information
    cp      - memory copy
    crc32   - checksum calculation
    echo    - echo args to console
    erase   - erase FLASH memory
    exit    - exit script
    flinfo  - print FLASH memory information
    gigatest - Enable Giga test mode
    go      - start application at address 'addr'
    help    - print online help
    iminfo  - print header information for application image
    imls    - list all images found in flash
    itest   - return true/false on integer compare
    ledb    - LED test blink
    ledoff  - LED test off
    ledon   - LED test on
    ledt    - LED test toggle
    loadb   - load binary file over serial line (kermit mode)
    loads   - load S-Record file over serial line
    loady   - load binary file over serial line (ymodem mode)
    loop    - infinite loop on address range
    md      - memory display
    mii     - MII utility commands
    mm      - memory modify (auto-incrementing)
    mtest   - simple RAM test
    mw      - memory write (fill)
    nfs     - boot image via network using NFS protocol
    nm      - memory modify (constant address)
    pci     - list and access PCI Configuration Space
    phyreg - read/write phyreg
    ping    - send ICMP ECHO_REQUEST to network host
    printenv- print environment variables
    progmac - Set ethernet MAC addresses
    protect - enable or disable FLASH write protection
    rarpboot- boot image via network using RARP/TFTP protocol
    reset   - Perform RESET of the CPU
    run     - run commands in an environment variable
    saveenv - save environment variables to persistent storage
    set_inspection - set/unset inspection mode
    setenv  - set environment variables
    sleep   - delay execution for some time
    test    - minimal test like /bin/sh
    tftpboot- boot image via network using TFTP protocol
    version - print monitor version
    autoscr - run script from memory
    

  • version
    ar7240> version
    
    U-Boot 1.1.4 for BUFFALO AIRSTATION (Apr  6 2011 - 08:52:25)
    

  • printenv
    一部変更されている可能性もあるため参考程度。
    ar7240> printenv
    bootargs=console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1152k@384k(uImage),6592k@1536k(rootfs),64k@320k(ART),64k@8128k(properties),8192k@8192k(flash1),16384k@16384k(flash2)
    bootcmd=bootm BF060000
    baudrate=115200
    ethaddr=02:AA:BB:CC:DD:22
    ipaddr=192.168.11.1
    serverip=192.168.11.2
    tmp_ram=81F00000
    tmp_bottom=83F00000
    fw_eaddr=BF060000 BEFFFFFF
    uboot_eaddr=BF000000 BF03FFFF
    u_fw=erase $fw_eaddr; cp.fw $fileaddr BF060000 $filesize; bootm BF060000;
    ut_fw=tftp $tmp_ram firmware.bin; erase $fw_eaddr; cp.fw $fileaddr BF060000 $filesize; bootm BF060000;
    ut_uboot=tftp $tmp_ram u-boot.bin; protect off $uboot_eaddr; erase $uboot_eaddr; cp.b $fileaddr BF000000 $filesize;
    melco_id=RD_BB10084
    hw_rev=0
    tftp_wait=4
    uboot_ethaddr=02:AA:BB:CC:DD:22
    DEF-p_wireless_ath0_11bg-authmode=psk
    DEF-p_wireless_ath0_11bg-crypto=tkip+aes
    DEF-p_wireless_ath0_11bg-authmode_ex=mixed-psk
    DEF-p_wireless_ath0_11bg-wpapsk=1234567890123
    pincode=12345670
    custom_id=0
    buf_ver=1.00
    region=JP
    product=BHR-4GRV
    build_date=Apr  6 2011 - 08:52:25
    buf_crc=F5EF0FF2
    accept_open_rt_fmt=1
    stdin=serial
    stdout=serial
    stderr=serial
    loadaddr=81F00000
    ethact=eth0
    
    Environment size: 1192/65532 bytes
    

Kernel

  • uname -a
    # uname -a
    Linux AP4CE67621B488 2.6.31--LSDK-9.2.0.106 #1 Thu Apr 14 21:09:38 JST 2016 mips unknown
    

  • cat /proc/version
    # cat /proc/version
    Linux version 2.6.31--LSDK-9.2.0.106 (jenkins@dev-build1.melco.local) (gcc version 4.3.3 (GCC) ) #1 Thu Apr 14 21:09:38 JST 2016
    

  • cat /proc/cpuinfo
    # cat /proc/cpuinfo
    system type             : Atheros AR7240 (Python)
    processor               : 0
    cpu model               : MIPS 24Kc V7.4
    BogoMIPS                : 266.24
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 16
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ff8, 0x0ffc, 0x0ff8, 0x0ff8]
    ASEs implemented        : mips16
    shadow register sets    : 1
    core                    : 0
    VCED exceptions         : not available
    VCEI exceptions         : not available
    

  • cat /proc/meminfo
    # cat /proc/meminfo
    MemTotal:          62100 kB
    MemFree:           43352 kB
    Buffers:            2228 kB
    Cached:             7676 kB
    SwapCached:            0 kB
    Active:             6004 kB
    Inactive:           7208 kB
    Active(anon):       3308 kB
    Inactive(anon):        0 kB
    Active(file):       2696 kB
    Inactive(file):     7208 kB
    Unevictable:           0 kB
    Mlocked:               0 kB
    SwapTotal:             0 kB
    SwapFree:              0 kB
    Dirty:                 0 kB
    Writeback:             0 kB
    AnonPages:          3328 kB
    Mapped:             2200 kB
    Slab:               3712 kB
    SReclaimable:        568 kB
    SUnreclaim:         3144 kB
    PageTables:          416 kB
    NFS_Unstable:          0 kB
    Bounce:                0 kB
    WritebackTmp:          0 kB
    CommitLimit:       31048 kB
    Committed_AS:      14916 kB
    VmallocTotal:    1048404 kB
    VmallocUsed:        1288 kB
    VmallocChunk:    1042744 kB
    

  • cat /proc/mtd
    # cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 00040000 00010000 "uboot"
    mtd1: 00010000 00010000 "uboot_environ"
    mtd2: 00010000 00010000 "ART"
    mtd3: 00100000 00010000 "linux"
    mtd4: 01e80000 00010000 "rootfs"
    mtd5: 00020000 00010000 "user_property"
    mtd6: 01f80000 00010000 "firmware"
    

  • bootlog
    BUFFALO U-BOOT Ver 1.00
      == CPU:400MHz, DDR:400MHz, AHB:200MHz ==
    AP111 (ar7241 - Virian) U-boot
    DRAM:  64 MB
    WAN port disabling: done
    Top of RAM usable for U-Boot at: 84000000
    Reserving 257k for U-Boot at: 83fbc000
    Reserving 192k for malloc() at: 83f8c000
    Reserving 44 Bytes for Board Info at: 83f8bfd4
    Reserving 36 Bytes for Global Data at: 83f8bfb0
    Reserving 128k for boot params() at: 83f6bfb0
    Stack Pointer at: 83f6bf98
    Now running in RAM - U-Boot at: 83fbc000
    flash bank #0 found 16 MB flash [W25Q128BV, blk:0x10000, sectors:256]
    flash bank #1 found 16 MB flash [W25Q128BV, blk:0x10000, sectors:256]
    Flash: 32 MB
    *** Warning *** : PCIe WLAN Module not found !!!
    In:    serial
    Out:   serial
    Err:   serial
    Memory Test (address line)
    uboot use  83F6BFB0 - 84000000
    Memory Test start(0x80000000) end(0x83F00000) size(67108864)
    Data line test start:0x80000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA 
    Address line test start:0x80000000 len:0x3f00000 pattern 0xAAAAAAAA 0x55555555  
    Fill test patnum:5 
    fill Pattern 5555AAAA  Writing...   Reading...
    fill Pattern AAAA5555  Writing...   Reading...
    fill Pattern 0000FFFF  Writing...   Reading...
    fill Pattern FFFF0000  Writing...   Reading...
    fill Pattern AAAAAAAA  Writing...   Reading...
    Memory Test OK
    ### buf_ver=[1.00] U-Boot Ver.=[1.00]
    ### build_date(env)=[Apr  6 2011 - 08:52:25] build_date(bin)=[Apr  6 2011 - 08:52:25]
    ag7240_enet_initialize...
    Reading MAC Address from ENV(0x83f8c322)
    No valid address in Flash. Using fixed address
    Virian MDC CFG Value ==> 4
    : cfg1 0x7 cfg2 0x7114
    eth0: 02:aa:bb:cc:dd:22
    athrs16_reg_init: complete
    eth0 up
    Virian MDC CFG Value ==> 4
    : cfg1 0xf cfg2 0x7214
    eth1: 00:03:7f:09:0b:ad
    eth1 up
    eth0  02:AA:BB:CC:DD:22
    , eth1  00:03:7F:09:0B:AD
    
    dup 1 speed 1000
    
    tftp server(receive) go, waiting:4[sec]
    Load address: 0x81f00000
    
    TftpServer Timeout;
    no file was loaded.
    LAN port disabling: done
    skip FW-CRC checking!!!
    change bootargs
    console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1152k@384k(uImage),6592k@1536k(rootfs),64k@320k(ART),64k@8128k(properties),8192k@8192k(flash1),16384k@16384k(flash2) mem=64M
    ## Booting image at bf060000 ...
       Image Name:   Linux Rootfs Combined Image
       Created:      2016-04-14  12:22:55 UTC
       Image Type:   MIPS Linux Kernel Image (lzma compressed)
       Data Size:    21450688 Bytes = 20.5 MB
       Load Address: 80002000
       Entry Point:  80201320
       Uncompressing Kernel Image ... OK
    No initrd
    ## Transferring control to Linux (at address 80201320) ...
    ## Giving linux memsize in bytes, 67108864
    
    Starting kernel ...
    
    Booting AR7240(Python)...
    Linux version 2.6.31--LSDK-9.2.0.106 (jenkins@dev-build1.melco.local) (gcc version 4.3.3 (GCC) ) #1 Thu Apr 14 21:09:38 JST 2016
    flash_size passed from bootloader = 32
    arg 1: console=ttyS0,115200
    arg 2: root=31:03
    arg 3: rootfstype=jffs2
    arg 4: init=/sbin/init
    arg 5: mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1152k@384k(uImage),6592k@1536k(rootfs),64k@320k(ART),64k@8128k(properties),8192k@8192k(flash1),16384k@16384k(flash2)
    arg 6: mem=64M
    use [CONFIG_CMDLINE] = console=ttyS0,115200 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(uboot),64k(uboot_environ),64k(ART),1024k(linux),31232k(rootfs),128k(user_property),32256k@384k(firmware) mem=64M 
    CPU revision is: 00019374 (MIPS 24Kc)
    Determined physical RAM map:
     memory: 02000000 @ 00000000 (usable)
    User-defined physical RAM map:
     memory: 04000000 @ 00000000 (usable)
    Zone PFN ranges:
      Normal   0x00000000 -> 0x00004000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
        0: 0x00000000 -> 0x00004000
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
    Kernel command line: console=ttyS0,115200 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(uboot),64k(uboot_environ),64k(ART),1024k(linux),31232k(rootfs),128k(user_property),32256k@384k(firmware) mem=64M
    PID hash table entries: 256 (order: 8, 1024 bytes)
    Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    Writing ErrCtl register=00000000
    Readback ErrCtl register=00000000
    Memory: 61900k/65536k available (2067k kernel code, 3564k reserved, 569k data, 128k init, 0k highmem)
    NR_IRQS:128
    plat_time_init: plat time init done
    Calibrating delay loop... 266.24 BogoMIPS (lpj=532480)
    Mount-cache hash table entries: 512
    NET: Registered protocol family 16
    ===== ar7240_platform_init: 0
    ***** Warning *****: PCIe WLAN H/W not found !!!
    bio: create slab  at 0
    SCSI subsystem initialized
    NET: Registered protocol family 2
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    TCP reno registered
    NET: Registered protocol family 1
    AR7240 GPIOC major 0
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    Slow work thread pool: Starting up
    Slow work thread pool: Ready
    GFS2 (built Apr 14 2016 21:06:37) installed
    msgmni has been set to 121
    alg: No test for lzma (lzma-generic)
    alg: No test for stdrng (krng)
    io scheduler noop registered
    io scheduler deadline registered (default)
    HDLC line discipline maxframe=4096
    N_HDLC line discipline registered.
    Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
    console [ttyS0] enabled
    brd: module loaded
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    PPP MPPE compression module registered
    NET: Registered protocol family 24
    drivers/mtd/mtdchar.c(1053): alloc reserved-buffer addr=83960000 size=131072
    check spi banks 2
    0000 : EF 40 18
    found W25Q128BV device on bank#0
    0000 : EF 40 18
    found W25Q128BV device on bank#1
    SPI flash size total:32 Mbytes
    WZR-HP-G450H_part partition parsing not available
    WZR-HP-G302NH_V2_part partition parsing not available
    WHR-AG300N_part partition parsing not available
    WHR-HP-G300N_part partition parsing not available
    7 cmdlinepart partitions found on MTD device ar7240-nor0
    Creating 7 MTD partitions on "ar7240-nor0":
    0x000000000000-0x000000040000 : "uboot"
    0x000000040000-0x000000050000 : "uboot_environ"
    0x000000050000-0x000000060000 : "ART"
    0x000000060000-0x000000160000 : "linux"
    0x000000160000-0x000001fe0000 : "rootfs"
    0x000001fe0000-0x000002000000 : "user_property"
    0x000000060000-0x000001fe0000 : "firmware"
    u32 classifier
    nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
    ip_tables: (C) 2000-2006 Netfilter Core Team
    TCP cubic registered
    NET: Registered protocol family 17
    802.1Q VLAN Support v1.8 Ben Greear 
    All bugs added by David S. Miller 
    ar7240wdt_init: Registering WDT success
    VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
    Freeing unused kernel memory: 128k freed
    Warning: unable to open an initial console.
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/char/mel_initsw.ko
    
    Please press Enter to activate this console. mel_initsw_ar7240_bhr_4grv: module license 'unspecified' taints kernel.
    Disabling lock debugging due to kernel taint
    mel_initsw initialized. 
    watchdogd.c(33) watchdogd_main :watchdog refresh 00000000
    WD:Start Watchdog Daemon
    rc.c(354) VerifyParamsOfInit :x:create status sections
    rc.c(896) SetUbootParam :====:pUbootProduct=BHR-4GRV
    rc.c(906) SetUbootParam :====:pProductHex=00000001(str:00000001)
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/2.6.31/net/athrs_gmac.ko
    ATHR_GMAC: Length per segment 1536
    ATHR_GMAC: fifo cfg 3 01f00140
    ATHR_GMAC: [eth%d] netdev_priv is 839f3ac0
    ATHR_GMAC: [eth%d] netdev_priv is 839f36c0
    ATHR_GMAC: Mac address for unit 0: 4c:e6:76:21:b4:88
    ATHR_GMAC: Mac address for unit 0: 4c:e6:76:21:b4:88
    ATHR_GMAC: Max segments per packet :   1
    ATHR_GMAC: Max tx descriptor count :   40
    ATHR_GMAC: Max rx descriptor count :   252
    ATHR_GMAC: Mac capability flags    :   4B81
    ATHR_GMAC: [eth%d] netdev_priv is 83a5d2c0
    ATHR_GMAC: [eth%d] netdev_priv is 839faec0
    ATHR_GMAC: Mac address for unit 1: 4c:e6:76:21:b4:89
    ATHR_GMAC: Mac address for unit 1: 4c:e6:76:21:b4:89
    ------------[ cut here ]------------
    WARNING: at fs/proc/generic.c:590 proc_register+0x18c/0x1d8()
    proc_dir_entry '/proc/eth' already registered
    Modules linked in: athrs_gmac(+) mel_initsw_ar7240_bhr_4grv(P)
    Call Trace:
    [] dump_stack+0x8/0x34
    [] warn_slowpath_common+0x70/0xb0
    [] warn_slowpath_fmt+0x24/0x30
    [] proc_register+0x18c/0x1d8
    [] proc_mkdir_mode+0x3c/0x64
    [] athr_gmac_init+0x93c/0xc84 [athrs_gmac]
    [] _stext+0x68/0x1ec
    
    ---[ end trace 0af1c5573033cd33 ]---
    ATHR_GMAC: Max segments per packet :   1
    ATHR_GMAC: Max tx descriptor count :   40
    ATHR_GMAC: Max rx descriptor count :   252
    ATHR_GMAC: Mac capability flags    :   4981
    athr_gmac_ring_alloc Allocated 640 at 0x83a61800
    athr_gmac_ring_alloc Allocated 4032 at 0x83a5c000
    Virian MDC CFG Value ==> 4
    Setting Drop CRC Errors, Pause Frames and Length Error frames 
    Modified reg init
    ATHRS16: resetting...
    ATHRS16: reset done.
    CFG Board need PortVLAN 
    Enable Broadcast forward
    port vlan initialize...
    AbBUFFALO athrs16_reg_init complete.
    Setting PHY...
    Phy setup Complete
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/2.6.31/net/athrs_gmac.ko
    insmod: cannot insert `/lib/modules/2.6.31/net/athrs_gmac.ko': Invalid parameters (17): Invalid argument
    MidLayerFlashNvram.c(2003) MLF_GetUbootParam :ERROR:cmderr="ubootenv get dummy_ethaddr "
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
    wanctl-lib.c(1395) CallIoctlOnEtherdeviceEx :ERR:!! Failed ioctl() !! ifr_name:[eth1] a_iCmd:[35093(-219)]:a_iCommand errorcode:126
    Cannot assign requested address
    MidLayerModDep.c(1195) MLMD_VerifyParamsInTree :error:ERROR module is rc_nat
    MidLayerModDep.c(1196) MLMD_VerifyParamsInTree :error:Warn-Mess  : ERROR_NONE
    MidLayerModDep.c(1197) MLMD_VerifyParamsInTree :error:Error-Mess : ML_ERROR_PARAM_VER
    MidLayerModDep.c(1195) MLMD_VerifyParamsInTree :error:ERROR module is rc_routectl
    MidLayerModDep.c(1196) MLMD_VerifyParamsInTree :error:Warn-Mess  : ERROR_NONE
    MidLayerModDep.c(1197) MLMD_VerifyParamsInTree :error:Error-Mess : ML_ERROR_PARAM_VER
    MidLayerModDep.c(1195) MLMD_VerifyParamsInTree :error:ERROR module is rc_usb_device_server
    MidLayerModDep.c(1196) MLMD_VerifyParamsInTree :error:Warn-Mess  : ERROR_NONE
    MidLayerModDep.c(1197) MLMD_VerifyParamsInTree :error:Error-Mess : ML_ERROR_PARAM_VER
    MidLayerModDep.c(1195) MLMD_VerifyParamsInTree :error:ERROR module is rc_ifilter
    MidLayerModDep.c(1196) MLMD_VerifyParamsInTree :error:Warn-Mess  : ERROR_NONE
    MidLayerModDep.c(1197) MLMD_VerifyParamsInTree :error:Error-Mess : ML_ERROR_PARAM_VER
    MidLayerModDep.c(1195) MLMD_VerifyParamsInTree :error:ERROR module is rc_timer_reboot
    MidLayerModDep.c(1196) MLMD_VerifyParamsInTree :error:Warn-Mess  : ERROR_NONE
    MidLayerModDep.c(1197) MLMD_VerifyParamsInTree :error:Error-Mess : ML_ERROR_PARAM_VER
    rc.c(896) SetUbootParam :====:pUbootProduct=BHR-4GRV
    rc.c(906) SetUbootParam :====:pProductHex=00000001(str:00000001)
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/2.6.31/net/athrs_gmac.ko
    insmod: cannot insert `/lib/modules/2.6.31/net/athrs_gmac.ko': Invalid parameters (17): Invalid argument
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/2.6.31/net/athrs_gmac.ko
    insmod: cannot insert `/lib/modules/2.6.31/net/athrs_gmac.ko': Invalid parameters (17): Invalid argument
    MidLayerFlashNvram.c(2003) MLF_GetUbootParam :ERROR:cmderr="ubootenv get dummy_ethaddr "
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko
    insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_proto_gre.ko': Invalid parameters (17): Invalid argument
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko
    insmod: cannot insert `/lib/modules/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko': Invalid parameters (17): Invalid argument
    MidLayerModDep.c(807) startModules :INFO:Starting module init
    Algorithmics/MIPS FPU Emulator v1.5
    mknod: /dev/ppp: File exists
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: slhc.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: ppp_generic.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: ppp_mppe.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: ppp_async.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: ppp_synctty.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: pppox.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: pppoe.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: zlib_deflate.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    insmod: ppp_deflate.ko: no module by that name found
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/nls/nls_base.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/core/usbcore.ko
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/host/ehci-hcd.ko
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Port Status c000004 
    ar7240-ehci ar7240-ehci.0: ATH EHCI
    ar7240-ehci ar7240-ehci.0: new USB bus registered, assigned bus number 1
    ehci_reset Intialize USB CONTROLLER in host mode: 3
    ehci_reset Port Status c000000 
    ar7240-ehci ar7240-ehci.0: irq 3, io mem 0x1b000000
    ehci_reset Intialize USB CONTROLLER in host mode: 3
    ehci_reset Port Status c000000 
    ar7240-ehci ar7240-ehci.0: USB 2.0 started, EHCI 1.00
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: ATH EHCI
    usb usb1: Manufacturer: Linux 2.6.31--LSDK-9.2.0.106 ehci_hcd
    usb usb1: SerialNumber: platform
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/host/ohci-hcd.ko
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    MidLayerModDep.c(819) startModules :INFO:Started  module init 1574[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_tz
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_tz 1[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_syslogd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_syslogd 287[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_klogd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_klogd 14[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_loif
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/2.6.31/net/athrs_gmac.ko
    insmod: cannot insert `/lib/modules/2.6.31/net/athrs_gmac.ko': Invalid parameters (17): Invalid argument
    MidLayerFlashNvram.c(2003) MLF_GetUbootParam :ERROR:cmderr="ubootenv get dummy_ethaddr "
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_loif 85[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_router_behavior
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_router_behavior 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module init
    MidLayerModDep.c(819) startModules :INFO:Started  module init 4[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_user_passwd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_user_passwd 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_usbmod
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/storage/usb-storage.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/exportfs/exportfs.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/xfs/xfs.ko
    et1: unit 1: phy 0 is up... [0x1000,0xbc1c]
    ATH_MAC_TIMER: WAN/enet unit:0 is up...
    RGMii 1000Mbps full duplex
    ATH_MAC_TIMER: done cfg2 0x7215 ifctl 0x0 miictrl  
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/fat/fat.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/fat/vfat.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/nls/nls_cp932.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/fs/nls/nls_utf8.ko
    MidLayerModDep.cathr_gmac_do_ioctl: dev:eth1 ifr:83905e18 cmd:0x89FF
    (819) startModulathrs16_ioctl_buffalo: dev:eth1 ethUnit:0 cmd:0x89FF
    es :INFO:Started+  module rc_usbm-od 1732[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wiredlan
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wiredlan 36[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module id
    MidLayerModDep.c(819) startModules :INFO:Started  module id 3[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module lang
    MidLayerModDep.c(819) startModules :INFO:Started  module lang 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_lanif
    
    rc_lanif.c(475) StartOfrc_lanif :x:PPPoE Path throw?
    
    
    unable to set ip mcast flag
    unable to set ip mcast policy
    wanctl-lib.c(1395) CallIoctlOnEtherdeviceEx :ERR:!! Failed ioctl() !! ifr_name:[eth1] a_iCmd:[35093(-219)]:a_iCommand errorcode:126
    Cannot assign requested address
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_lanif 145[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_udhcpd
    udhcpd (v0.9.9-pre) started
    max_leases value (256) not sane, setting to 64 instead
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_udhcpd 27[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ap_serv
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ap_serv 31[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_usb_device_server
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/netusb/sxuptp.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/netusb/sxuptp_driver.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/netusb/jcp.ko
    rc_usb_device_server.c(107) InsmodDeviceServer :debug-usbnet:insmod jcp_cmd product=BHR-4GRV
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/drivers/usb/netusb/jcp_cmd.ko
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_usb_device_server 482[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_httpd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_httpd 145[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanif
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanif 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pre
    athr_gmac_do_ioctl: dev:eth1 ifr:83b3be18 cmd:0x89FB
    athrs16_ioctl_buffalo: dev:eth1 ethUnit:0 cmd:0x89FB
    et1: unit 1: phy 0 not up carrier [0x1000/0x10]
    ATH_MAC_TIMER: WAN/unit 0: phy 0 not up carrier 1
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_dhcpcd)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_pppoecd_0)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_pppoecd_1)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_pppoecd_2)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_pppoecd_3)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_pppoecd_4)
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_auto_detect)
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pre 3066[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect
    route: SIOC[ADD|DEL]RT: No such process
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 0 ##
    wanctl-lib.c(1891) CheckDhcpClient :x:## don't get DHCP Client status ##
    client.c(3210) SetAutoIP :eth1 set by AutoIP. ipaddr(169.254.49.223) netmask(255.255.0.0)
    et1: unit 1: phy 0 is up... [0x1000,0xbc1c]
    ATH_MAC_TIMER: WAN/enet unit:0 is up...
    RGMii 1000Mbps full duplex
    ATH_MAC_TIMER: done cfg2 0x7215 ifctl 0x0 miictrl  
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 1 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_DISCOVER##
    wanctl-lib.c(1881) CheckDhcpClient :x:## Success : START DHCP Client ##
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 0 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_DISCOVER##
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 1 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_DISCOVER##
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 2 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_DISCOVER##
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 3 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_DISCOVER##
    wanctl-lib.c(1908) CheckDhcpClient :x:## START : Wait DHCP Client... 4 ##
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_BOUND##
    wanctl-lib.c(1884) CheckDhcpClient :x:## Success : Found DHCP_BOUND Status ##
    wanctl_dhcpcd.c(252) StoptDhcpcd :dhcpc-lock-debug:wanctl :Through StoptDhcpcd()
    MidLayer.c(1700) ML_Signal_QueueRemove :x:SIGNAL-QUEUE NOT-FOUND (tree=NORM mod=rc_wanctl_dhcpcd)
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect 10266[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_dummy
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_dummy 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_dhcpcd
    wanctl_dhcpcd.c(52) StartDhcpcd :dhcpc-lock-debug:wanctl : Through StartDhcpcd()
    wanctl-lib.c(1873) CheckDhcpClient :x:## DHCP Client status = DHCP_BOUND##
    wanctl-lib.c(1884) CheckDhcpClient :x:## Success : Found DHCP_BOUND Status ##
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_dhcpcd 154[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_0
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_0 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_1
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_1 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_2
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_2 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_3
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_3 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_4
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_4 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_auto_detect_pppoecd_check
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_auto_detect_pppoecd_check 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_manual
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_manual 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_dhcpcd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_dhcpcd 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_0
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_0 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_1
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_1 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_2
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_2 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_3
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_3 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_4
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_4 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoecd_check
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoecd_check 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_post
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_post 96[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wanctl_pppoeroute
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wanctl_pppoeroute 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_dnrd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_dnrd 111[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_netwatchd
    wanctl-wanstate_check.c(911) wanstate_check_main :wanctl:Start wanstate_check Daemon
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_netwatchd 192[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ipfilter
    iptables: Bad rule (does a matching rule exist in that chain?)
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ipfilter 504[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ipfilter_simple
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ipfilter_simple 34[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ipfilter_user
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ipfilter_user 1[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ipfilter_pptp
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ipfilter_pptp 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_nat
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_conntrack_pptp.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/netfilter/nf_nat_pptp.ko
    insmod: /lib/modules/2.6.31--LSDK-9.2.0.106: No such file or directory
    Using /lib/modules/kernel/net/ipv4/buff_fastpath.ko
    
    Loding buf_fastpath_module
    --> FastNAT poor_spi Enable 9
    rcUtil.c(5382) S--> FastNAT Started C0A80C01/FFFFFF00 -> C0A80118/FFFFFF00 
    etFastNat :fastnat-debug:write "poor_spi:9
    " ==> "/proc/net/fastnat"
    rcUtil.c(5397) SetFastNat :fastnat-debug:write "start:eth1:br0
    " ==> "/proc/net/fastnat"
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_nat 468[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_routectl
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_routectl 34[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_zebra
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_zebra 716[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_lltd
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_lltd 154[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_upnp
    iptables v1.4.2: Couldn't find target `UPNP-PREROUTING-CHAIN'
    
    Try `iptables -h' or 'iptables --help' for more information.
    iptables: No chain/target/match by that name
    iptables: No chain/target/match by that name
    iptables v1.4.2: Couldn't find target `UPNP-POSTROUTING-CHAIN'
    
    Try `iptables -h' or 'iptables --help' for more information.
    iptables: No chain/target/match by that name
    iptables: No chain/target/match by that name
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_upnp 301[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ntpclient
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ntpclient 110[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_eco
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_eco 50[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_wan_qos
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_wan_qos 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_pptp_client
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_pptp_client 119[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_pptp_client_route
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_pptp_client_route 165[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_pptp_server
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_pptp_server 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_pptp_server_route
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_pptp_server_route 54[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_nastorage
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_nastorage 4[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_ifilter
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_ifilter 0[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_auto_fwup
    led_mask_11g_chip:0
    /dev/set_clock: cannot create
    wanctl_fwupdate.c(191) GetFirmwareListFromInternet :DEBUG:pUrl:http://product.buffalo.jp/download/driver/lan/autoup/bhr_4grv_jp.txt
    wanctl-lib.c(3782) GetDataFromInternetEx :DEBUG:parse_url start
    wanctl-lib.c(3784) GetDataFromInternetEx :DEBUG:parse_url end
    wanctl-lib.c(3787) GetDataFromInternetEx :DEBUG:server.host : product.buffalo.jp
    wanctl-lib.c(3788) GetDataFromInternetEx :DEBUG:target.path : download/driver/lan/autoup/bhr_4grv_jp.txt
    wanctl-lib.c(3794) GetDataFromInternetEx :DEBUG:lookup_host start
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_auto_fwup 306[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_end_signal
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_end_signal 32[msec]
    MidLayerModDep.c(807) startModules :INFO:Starting module rc_timer_reboot
    MidLayerModDep.c(819) startModules :INFO:Started  module rc_timer_reboot 0[msec]
    wanctl-lib.c(3552) GetHostByNameWithTimeOut :DEBUG:Waiting for GetHostByName's End... 0
    wanctl-lib.c(3552) GetHostByNameWithTimeOut :DEBUG:Waiting for GetHostByName's End... 1
    wanctl-lib.c(3799) GetDataFromInternetEx :DEBUG:lookup_host end
    wanctl-lib.c(3800) GetDataFromInternetEx :DEBUG:server.host : product.buffalo.jp
    wanctl-lib.c(3801) GetDataFromInternetEx :DEBUG:target.path : download/driver/lan/autoup/bhr_4grv_jp.txt
    wanctl_fwupdate.c(193) GetFirmwareListFromInternet :DEBUG:GetDataFromInternet Success.
    main.c(280) main :x:PMLIST RESTORE START
    main.c(283) main :x:PMLIST RESTORE END
    ARPING to 192.168.12.1 from 192.168.12.1 via br0
    Sent 1 probes (1 broadcast(s))
    Received 0 reply
    

コメントを残す

以下に詳細を記入するか、アイコンをクリックしてログインしてください。

WordPress.com ロゴ

WordPress.com アカウントを使ってコメントしています。 ログアウト /  変更 )

Google フォト

Google アカウントを使ってコメントしています。 ログアウト /  変更 )

Twitter 画像

Twitter アカウントを使ってコメントしています。 ログアウト /  変更 )

Facebook の写真

Facebook アカウントを使ってコメントしています。 ログアウト /  変更 )

%s と連携中