WN-AC1167GR stock -> OpenWrt

それっぽい感じにヘッダを作り、投げ込めたのでメモ。
“wnac1167gr_v000.bin” というようなファイル名にリネームして放り込む必要がありそうな? → 特にリネームする必要は無かった。

br0: port 4(rai0) entering forwarding state
br0: port 3(ra1) entering forwarding state
br0: port 2(ra0) entering forwarding state
br0: port 1(eth2.1) entering forwarding state
device eth2.1 left promiscuous mode
br0: port 1(eth2.1) entering disabled state
sh: can't kill pid 719: No such process
route: SIOCDELRT: No such process
device ra0 left promiscuous mode
br0: port 2(ra0) entering disabled state
device ra1 left promiscuous mode
br0: port 3(ra1) entering disabled state
device wds0 is not a slave of br0
device wds1 is not a slave of br0
device wds2 is not a slave of br0
device wds3 is not a slave of br0
sh: can't kill pid 811: No such process
route: SIOCDELRT: No such process
device rai0 left promiscuous mode
br0: port 4(rai0) entering disabled state
interface wds4 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface wds5 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface wds6 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
interface wds7 does not exist!
ifconfig: SIOCGIFFLAGS: No such device
Interface doesn't accept private ioctl...
set (8BE2): Network is down
Interface doesn't accept private ioctl...
set (8BE2): Network is down
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
Hardware reset!!


U-Boot 1.1.3 (Jul 30 2014 - 21:26:23)

Board: Ralink APSoC DRAM:  64 MB
Ralink UBoot ver: 4.0.1.0
ELX UBoot ver: 4.0.1.6 (Jul 30 2014 21:26:23)
Date:Jul 30 2014  Time:21:26:23
CPU: 580 MHz, MEM: 64 MB
#Reset_MT7530
MT7620N disable wan port phy 0

Please choose the operation: 1, 2, 3, 4, 9
                                                                                                                          0  
   
3: System Boot system code via Flash.
## Booting image at bc070000 ...
   Image Name:   MIPS OpenWrt Linux-4.14.89
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1572544 Bytes =  1.5 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 4.14.89 (musashino205@Taiha.Net) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0+8844-8b0f1087cc)) #0 Wed Dec 19 14:20:51 2018
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is I-O DATA WN-AC1167GR
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0001af06
[    0.000000] Readback ErrCtl register=0001af06
[    0.000000] Memory: 59792K/65536K available (3650K kernel code, 169K rwdata, 852K rodata, 184K init, 207K bss, 5744K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.015469] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.087708] pid_max: default: 32768 minimum: 301
[    0.097110] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.110134] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.130733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.150215] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.162391] pinctrl core: initialized pinctrl subsystem
[    0.173240] NET: Registered protocol family 16
[    0.664925] PCI host bridge /pcie@10140000 ranges:
[    0.674322]  MEM 0x0000000020000000..0x000000002fffffff
[    0.684696]   IO 0x0000000010160000..0x000000001016ffff
[    0.711848] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.722885] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.735975] PCI host bridge to bus 0000:00
[    0.743971] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.757691] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.769418] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.782919] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.799126] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.815680] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.828738] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.842549] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.856050] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.870415] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.883925] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.898470] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.912817] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.922669] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.936186] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.954220] clocksource: Switched to clocksource systick
[    0.965893] NET: Registered protocol family 2
[    0.975340] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.989118] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    1.001710] TCP: Hash tables configured (established 1024 bind 1024)
[    1.014493] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.026011] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.038685] NET: Registered protocol family 1
[    1.049988] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    1.062734] Crashlog allocated RAM at address 0x3f00000
[    1.074984] workingset: timestamp_bits=30 max_order=14 bucket_order=0
[    1.093443] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.104948] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.134261] io scheduler noop registered
[    1.141907] io scheduler deadline registered (default)
[    1.152969] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.166616] console [ttyS0] disabled
[    1.173609] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    1.193384] console [ttyS0] enabled
[    1.193384] console [ttyS0] enabled
[    1.207155] bootconsole [early0] disabled
[    1.207155] bootconsole [early0] disabled
[    1.223589] cacheinfo: Failed to find cpu0 device node
[    1.233860] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.250494] spi spi0.0: force spi mode3
[    1.258992] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    1.268831] 9 fixed-partitions partitions found on MTD device spi0.0
[    1.281492] Creating 9 MTD partitions on "spi0.0":
[    1.291053] 0x000000000000-0x000000030000 : "u-boot"
[    1.301893] 0x000000030000-0x000000040000 : "u-boot-env"
[    1.313411] 0x000000040000-0x000000048000 : "Factory"
[    1.324481] 0x000000048000-0x000000050000 : "iNIC_rf"
[    1.335451] 0x000000050000-0x000000070000 : "NoUsed"
[    1.346240] 0x000000070000-0x000000724000 : "firmware"
[    1.361495] 2 uimage-fw partitions found on MTD device firmware
[    1.373360] Creating 2 MTD partitions on "firmware":
[    1.383268] 0x000000000000-0x00000017ff00 : "kernel"
[    1.394103] 0x00000017ff00-0x0000006b4000 : "rootfs"
[    1.404891] mtd: device 7 (rootfs) set to be root filesystem
[    1.417780] 1 squashfs-split partitions found on MTD device rootfs
[    1.430170] 0x00000051c000-0x0000006b4000 : "rootfs_data"
[    1.441868] 0x000000724000-0x0000007b0000 : "manufacture"
[    1.453527] 0x0000007b0000-0x0000007c0000 : "backup"
[    1.464422] 0x0000007c0000-0x000000800000 : "storage"
[    1.476152] libphy: Fixed MDIO Bus: probed
[    1.494665] libphy: mdio: probed
[    1.505816] mtk_soc_eth 10100000.ethernet: using fixed link parameters
[    1.520905] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[    1.543657] mtk_soc_eth 10100000.ethernet: loaded mt7530 driver
[    1.556146] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.573158] rt2880_wdt 10000120.watchdog: Initialized
[    1.584634] NET: Registered protocol family 10
[    1.598207] Segment Routing with IPv6
[    1.605689] NET: Registered protocol family 17
[    1.614607] 8021q: 802.1Q VLAN Support v1.8
[    1.640878] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    1.655983] Freeing unused kernel memory: 184K
[    1.664861] This architecture does not have kernel memory protection.
[    2.884162] random: fast init done
[    3.376096] init: Console is alive
[    3.383103] init: - watchdog -
[    5.216454] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.602456] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.618831] init: - preinit -
[    7.679126] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
[    7.695385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.707063] 8021q: adding VLAN 0 to HW filter on device eth0
[    7.718617] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3[    7.881440] random: procd: uninitialized urandom read (4 bytes read)
] or [4] key and hit [enter] to select the debug level
[    8.333303] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    8.382482] urandom-seed: Seed file not found (/etc/urandom.seed)
[    8.477085] mtk_soc_eth 10100000.ethernet eth0: port 5 link down
[    8.500674] procd: - early -
[    8.506519] procd: - watchdog -
[    8.720075] procd: - watchdog -
[    8.726625] procd: - ubus -
[    8.995261] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.119153] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.132436] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.146130] procd: - init -
Please press Enter to activate this console.
[    9.687288] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.912282] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.936696] Loading modules backported from Linux version v4.19.7-0-g61c68f2a2af0
[    9.951681] Backport generated by backports.git v4.19.7-1-0-g148b072d
[    9.969253] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.991331] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[   10.240395] xt_time: kernel timezone is -0000
[   10.405310] mt76x2e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[   10.417917] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[   10.616088] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
[   10.634389] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   10.645359] mt76x2e 0000:01:00.0: Build: 1
[   10.653512] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   10.670106] mt76x2e 0000:01:00.0: Firmware running!
[   10.706126] PPP generic driver version 2.4.2
[   10.723773] NET: Registered protocol family 24
[   10.833645] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "Factory"
[   10.848119] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 6352, rev 0500 detected
[   10.863584] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[   10.976473] kmodloader: done loading kernel modules from /etc/modules.d/*
[   12.379026] urandom_read: 5 callbacks suppressed
[   12.379035] random: jshn: uninitialized urandom read (4 bytes read)
[   29.231715] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   29.285994] jffs2_build_filesystem(): unlocking the mtd device... 
[   29.286009] done.
[   29.302226] jffs2_build_filesystem(): erasing all blocks after the end marker... 
[   29.579476] mtk_soc_eth 10100000.ethernet eth0: port 5 link up (1000Mbps/Full duplex)
[   29.610524] 8021q: adding VLAN 0 to HW filter on device eth0
[   29.805068] br-lan: port 1(eth0.1) entered blocking state
[   29.815907] br-lan: port 1(eth0.1) entered disabled state
[   29.827089] device eth0.1 entered promiscuous mode
[   29.836692] device eth0 entered promiscuous mode
[   30.020666] br-lan: port 1(eth0.1) entered blocking state
[   30.031498] br-lan: port 1(eth0.1) entered forwarding state
[   30.042845] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   30.611535] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   53.338536] done.
[   53.342445] jffs2: notice: (1277) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   54.227888] overlayfs: upper fs does not support tmpfile.
[   66.595958] random: crng init done



BusyBox v1.29.3 () built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r0+8851-5827264d5b
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/# ubus call system board
{
        "kernel": "4.14.89",
        "hostname": "OpenWrt",
        "system": "MediaTek MT7620A ver:2 eco:6",
        "model": "I-O DATA WN-AC1167GR",
        "board_name": "iodata,wn-ac1167gr",
        "release": {
                "distribution": "OpenWrt",
                "version": "SNAPSHOT",
                "revision": "r0+8851-5827264d5b",
                "target": "ramips\/mt7620",
                "description": "OpenWrt SNAPSHOT r0+8851-5827264d5b"
        }
}
広告

コメントを残す

以下に詳細を記入するか、アイコンをクリックしてログインしてください。

WordPress.com ロゴ

WordPress.com アカウントを使ってコメントしています。 ログアウト /  変更 )

Google フォト

Google アカウントを使ってコメントしています。 ログアウト /  変更 )

Twitter 画像

Twitter アカウントを使ってコメントしています。 ログアウト /  変更 )

Facebook の写真

Facebook アカウントを使ってコメントしています。 ログアウト /  変更 )

%s と連携中