WSR-2533DHPL stock -> OpenWrt (Fail)

長らくメーカーファーム上でのチェックを通せずにいたが、buffalo-tagを弄ったところパスできるようになったが、その後OpenWrtでブートした際にRootFSをマウントできず止まった。

The tail length is 48! Update len to 7078136!
decodesize 7077892...
cp: can't stat '/usr/sbin/ubi*': No such file or directory
cp: can't stat '/usr/sbin/uboot_env': No such file or directory
token=tools, line=default
token=partitions, line=Kernel
token=Kernel, line=0x0:-
sector: Kernel -> offset=[0x0], write_len=[0x6c0004]
[get_all_mtd] MTD[0]: /dev/mtd0, 0x1000000, 0x10000, ALL
[get_all_mtd] MTD[1]: /dev/mtd1, 0x30000, 0x10000, Bootloader
[get_all_mtd] MTD[2]: /dev/mtd2, 0x10000, 0x10000, Config
[get_all_mtd] MTD[3]: /dev/mtd3, 0x10000, 0x10000, Factory
[get_all_mtd] MTD[4]: /dev/mtd4, 0x7c0000, 0x10000, Kernel
[get_all_mtd] MTD[5]: /dev/mtd5, 0x53b8f0, 0x10000, RootFS
[get_all_mtd] MTD[6]: /dev/mtd6, 0x7c0000, 0x10000, Kernel2
[get_all_mtd] MTD[7]: /dev/mtd7, 0x53b8f0, 0x10000, RootFS2
[get_all_mtd] MTD[8]: /dev/mtd8, 0x10000, 0x10000, glbcfg
[get_all_mtd] MTD[9]: /dev/mtd9, 0x10000, 0x10000, board_data
[merge_sector_info] sector[0]: name=[Kernel], dev=[/dev/mtd4], offset=[0], write_len=[7077892], max_allow_size=[8126464]
[validate_file] freeram=[59179008] bufferram=[3739648]
/tmp/uploadMs88aC: CRC OK
[do_default_update] filesize=[7077892], offset=[0]
[do_default_update] Erase MTD[Kernel]: start
[do_default_update] Erase MTD[Kernel]: end
[do_default_update] Write MTD[Kernel]: start
[do_default_update] Write MTD[Kernel]: end
[switch_bank] to 0, return 0
upload return: 0
MReconnect to midcore failed.
[mapi_tx_transc_req] write msg length fail Connection refused
Restarting system.

===================================================================
                MT7621   stage1 code 10:33:55 (ASIC)
                CPU=500000000 HZ BUS=166666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL2 FB_DL: 0xb, 1/0 = 547/477 2D000000
PLL3 FB_DL: 0x15, 1/0 = 580/444 55000000
PLL4 FB_DL: 0x18, 1/0 = 744/280 61000000
do DDR setting..[01F40000]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    1
000E:|    0    0    0    0    0    0    0    0    0    1    1    1    1    1    1    1
000F:|    0    0    0    0    1    1    1    1    1    1    1    1    1    1    0    0
0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 15
rank 0 fine = 72
B:|    0    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0
opt_dle value:11
DRAMC_R0DELDLY[018]=00001E1F
==================================================================
                RX      DQS perbit delay software calibration 
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    13 13 15 15 11 12 13 10 9 10 
10 |    11 11 13 13 11 12 
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center 
y=0-7bit DQ of every group
input delay:DQS0 =31 DQS1 = 30
==================================================================
bit     DQS0     bit      DQS1
0  (1~58)29  8  (1~56)28
1  (1~56)28  9  (1~54)27
2  (1~60)30  10  (1~59)30
3  (1~61)31  11  (1~57)29
4  (1~58)29  12  (1~58)29
5  (1~59)30  13  (1~55)28
6  (1~61)31  14  (1~60)30
7  (1~60)30  15  (1~57)29
==================================================================
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    15 15 15 15 13 13 13 11 11 13 
10 |    11 12 14 15 11 13 
==================================================================
==================================================================
     TX  perbyte calibration 
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000 
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1 
dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2 
DQ loop=15, cmp_err_1 = ffff01ae
DQ loop=14, cmp_err_1 = ffff0180
DQ loop=13, cmp_err_1 = ffff0080
dqs_perbyte_dly.last_dqdly_pass[1]=13,  finish count=1 
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=12,  finish count=2 
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(9,8)
20,data:99
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done 
                CPU=500000000 HZ BUS=166666666 HZ
===================================================================


U-Boot 1.1.3 (Aug  5 2016 - 17:01:25) 0.02

Board: Ralink APSoC DRAM:  128 MB
relocate_code Pointer at: 87fb8000

Config XHCI 40M PLL 
******************************
Software System Reset Occurred
******************************
flash manufacture id: ef, device id 40 18
find flash: W25Q128BV
============================================ 
Ralink UBoot Version: 5.0.0.0
-------------------------------------------- 
ASIC MT7621A DualCore (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection 
DRAM_TYPE: DDR3 
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: 16 MBytes NOR Flash
Date:Aug  5 2016  Time:17:01:25
============================================ 
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768 

 ##### The CPU freq = 880 MHZ #### 
 estimate memory size =128 Mbytes
#Reset_MT7530
set LAN/WAN WLLLL

Please choose the operation: 
   1: Load system code to SDRAM via TFTP. 
   2: Load system code then write to Flash via TFTP. 
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial. 
   9: Load Boot Loader code then write to Flash via TFTP.                                                                  0 
   
3: System Boot system code via Flash0.
## Booting image at bc050000 ...

=================================================
Check image validation:
Image1 Trx Check --> 
## check_trx, crc=-575298866, *crc_ret=-575298866.
OK
Image1 Header Magic Number --> OK
Image1 Header Checksum --> OK
Image1 Data Checksum --> OK

=================================================

=================================================
Check image validation:
Image2 Trx Check --> 
## check_trx, crc=-1234505007, *crc_ret=-1234505007.
OK
Image2 Header Magic Number --> OK
Image2 Header Checksum --> OK
Image2 Data Checksum --> OK

=================================================
## check Image1 return 0, check Image2 return 0, Image1 crc=-575298866, Image2 crc=-1234505007.
Image1 is ok!
Image2 is not same as Image1, copy Image1 to Image2!

Copy Image:
Image1(0x50000) to Image2(0x810000), size=0x68E000
........................................................................................................
........................................................................................................
.
.
Done!
   Image Name:   MIPS OpenWrt Linux-4.14.143
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    2006978 Bytes =  1.9 MB
   Load Address: 80001000
   Entry Point:  80001000
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80001000) ...
## Giving linux memsize in MB, 128

Starting kernel ...

[    0.000000] Linux version 4.14.143 (musashino205@Taiha.Net) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0+11016-9bf7431d38)) #0 SMP Sun Sep 15 14:46:05 2019
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Buffalo WSR-2533DHPL
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
[    0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=000492b0
[    0.000000] Readback ErrCtl register=000492b0
[    0.000000] Memory: 121868K/131072K available (4789K kernel code, 246K rwdata, 1036K rodata, 1276K init, 254K bss, 9204K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[    0.015496] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.087822] pid_max: default: 32768 minimum: 301
[    0.097183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.110205] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.126315] Hierarchical SRCU implementation.
[    0.135850] smp: Bringing up secondary CPUs ...
[    0.146319] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.146329] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.146340] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.146477] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.205169] Synchronize counters for CPU 1: done.
[    0.276364] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.276372] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.276381] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.276458] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.326109] Synchronize counters for CPU 2: done.
[    0.387189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.387197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.387205] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.387279] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.445677] Synchronize counters for CPU 3: done.
[    0.505287] smp: Brought up 1 node, 4 CPUs
[    0.517696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.537183] futex hash table entries: 1024 (order: 3, 32768 bytes)
[    0.549730] pinctrl core: initialized pinctrl subsystem
[    0.561419] NET: Registered protocol family 16
[    0.579962] pull PCIe RST: RALINK_RSTCTRL = 4000000
[    0.890005] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.900071] ***** Xtal 40MHz *****
[    0.906803] release PCIe RST: RALINK_RSTCTRL = 7000000
[    0.917011] Port 0 N_FTS = 1b105000
[    0.923908] Port 1 N_FTS = 1b105000
[    0.930833] Port 2 N_FTS = 1b102800
[    2.089681] PCIE2 no card, disable it(RST&CLK)
[    2.098375]  -> 21007f2
[    2.103193] PCIE0 enabled
[    2.108394] PCIE1 enabled
[    2.113573] PCI host bridge /pcie@1e140000 ranges:
[    2.123096]  MEM 0x0000000060000000..0x000000006fffffff
[    2.133463]   IO 0x000000001e160000..0x000000001e16ffff
[    2.143829] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[    2.167190] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.178509] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.189746] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    2.202416] PCI host bridge to bus 0000:00
[    2.210435] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.224099] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    2.235844] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    2.249312] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.267225] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    2.280256] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.294069] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    2.307198] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    2.321029] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    2.334502] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[    2.347983] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[    2.361468] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
[    2.374952] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    2.389463] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.399292] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    2.412791] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[    2.427308] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.437130] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
[    2.452070] clocksource: Switched to clocksource GIC
[    2.463868] NET: Registered protocol family 2
[    2.473126] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    2.486864] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    2.499464] TCP: Hash tables configured (established 1024 bind 1024)
[    2.512225] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    2.523722] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    2.536386] NET: Registered protocol family 1
[    2.782013] 4 CPUs re-calibrate udelay(lpj = 2924544)
[    2.793455] Crashlog allocated RAM at address 0x3f00000
[    2.804005] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    2.821011] random: fast init done
[    2.831197] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.842705] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.865629] io scheduler noop registered
[    2.873357] io scheduler deadline registered (default)
[    2.884372] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    2.898171] console [ttyS0] disabled
[    2.905238] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    2.923164] console [ttyS0] enabled
[    2.923164] console [ttyS0] enabled
[    2.936951] bootconsole [early0] disabled
[    2.936951] bootconsole [early0] disabled
[    2.954651] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[    2.968911] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    2.989274] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    2.998721] 7 fixed-partitions partitions found on MTD device spi0.0
[    3.011375] Creating 7 MTD partitions on "spi0.0":
[    3.020931] 0x000000000000-0x000000030000 : "u-boot"
[    3.031863] 0x000000030000-0x000000040000 : "u-boot-env"
[    3.043397] 0x000000040000-0x000000050000 : "factory"
[    3.054441] 0x000000050000-0x000000810000 : "firmware"
[    3.068725] 0x000000810000-0x000000fd0000 : "Kernel2"
[    3.079818] 0x000000fd0000-0x000000fe0000 : "glbcfg"
[    3.090684] 0x000000fe0000-0x000001000000 : "board_data"
[    3.102869] libphy: Fixed MDIO Bus: probed
[    3.174069] libphy: mdio: probed
[    4.582213] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[    4.594638] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
[    4.613452] NET: Registered protocol family 10
[    4.623865] Segment Routing with IPv6
[    4.631241] NET: Registered protocol family 17
[    4.640193] 8021q: 802.1Q VLAN Support v1.8
[    4.650825] hctosys: unable to open rtc device (rtc0)
[    4.661736] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    4.676655] Please append a correct "root=" boot option; here are the available partitions:
[    4.693291] 1f00             192 mtdblock0 
[    4.693298]  (driver?)
[    4.706301] 1f01              64 mtdblock1 
[    4.706306]  (driver?)
[    4.719316] 1f02              64 mtdblock2 
[    4.719321]  (driver?)
[    4.732340] 1f03            7936 mtdblock3 
[    4.732346]  (driver?)
[    4.745348] 1f04            7936 mtdblock4 
[    4.745353]  (driver?)
[    4.758356] 1f05              64 mtdblock5 
[    4.758361]  (driver?)
[    4.771362] 1f06             128 mtdblock6 
[    4.771368]  (driver?)
[    4.784386] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    4.802463] Rebooting in 1 seconds..
広告

コメントを残す

以下に詳細を記入するか、アイコンをクリックしてログインしてください。

WordPress.com ロゴ

WordPress.com アカウントを使ってコメントしています。 ログアウト /  変更 )

Google フォト

Google アカウントを使ってコメントしています。 ログアウト /  変更 )

Twitter 画像

Twitter アカウントを使ってコメントしています。 ログアウト /  変更 )

Facebook の写真

Facebook アカウントを使ってコメントしています。 ログアウト /  変更 )

%s と連携中