WRC-2533GST2

知人氏にハードオフで代理購入して頂くことができ、入手したもの。WRC-2533GSTとほぼ同じと思いきや、意外と差異があった。
サポートのため弄っていくのでメモ。

Switch

zone WAN LAN
port
(WRC-2533GST2)
INTERNET LAN4 LAN3 LAN2 LAN1
port
(MT7530)
port0 port1 port2 port3 port4

MAC

  • LAN: 04:AB:18:xx:xx:83 (Factory, 0xE000 (hex))
  • WAN: 04:AB:18:xx:xx:84 (Factory, 0xE006 (hex))
  • 2.4G: 04:AB:18:xx:xx:85 (Factory, 0x4 (hex))
  • 5G: 04:AB:18:xx:xx:86 (Factory, 0x8004 (hex))

U-Boot

  • help
    MT7621 # help
    ?       - alias for 'help'
    bootm   - boot application image from memory
    cp      - memory copy
    erase   - erase SPI FLASH memory
    go      - start application at address 'addr'
    help    - print online help
    httpboot- entering the backup mode.
    loadb   - load binary file over serial line (kermit mode)
    md      - memory display
    mdio   - Ralink PHY register R/W command !!
    mm      - memory modify (auto-incrementing)
    nm      - memory modify (constant address)
    printenv- print environment variables
    reset   - Perform RESET of the CPU
    rf      - read/write rf register
    saveenv - save environment variables to persistent storage
    setenv  - set environment variables
    spi     - spi command
    tftpboot- boot image via network using TFTP protocol
    version - print monitor version
    

  • version
    MT7621 # version
    
    U-Boot 1.1.3 (Nov 20 2018 - 18:09:19)
    

  • printenv
    MT7621 # printenv
    bootcmd=tftp
    bootdelay=5
    baudrate=57600
    ethaddr="00:AA:BB:CC:DD:10"
    ipaddr=192.168.2.1
    serverip=192.168.2.2
    model_id=WRC-2533GST2
    board_id=2019A1221168
    wlan0_guest_ssid=e-tomo-******
    wlan0_guest_key=********
    ez_group_id=elecom-******
    wlan0_ssid=elecom-******
    wlan1_ssid=elecom-******
    wlan0_key=************
    wlan1_key=************
    admin_password=********
    wps_pin=*******
    hw_version=A1
    wlan0_domain=0x41
    stdin=serial
    stdout=serial
    stderr=serial
    ethact=Eth0 (10/100-M)
    
    Environment size: 467/4092 bytes
    

Kernel

パスワードが設定されているため、ログイン不可。failsafeモードはあるのでそこから情報取得。

  • uname -a
    root@MT7621:/# uname -a
    Linux MT7621 3.10.14 #6 SMP Tue Oct 29 14:31:40 CST 2019 mips GNU/Linux
    

  • cat /proc/version
    root@MT7621:/# cat /proc/version
    Linux version 3.10.14 (*****@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r48067) ) #6 SMP Tue Oct 29 14:31:40 CST 2019
    

  • cat /proc/cpuinfo
    root@MT7621:/# cat /proc/cpuinfo
    system type             : MT7621
    machine                 : Unknown
    processor               : 0
    cpu model               : MIPS 1004Kc V2.15
    BogoMIPS                : 577.53
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 32
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
    isa                     : mips1 mips2 mips32r1 mips32r2
    ASEs implemented        : mips16 dsp mt
    shadow register sets    : 1
    kscratch registers      : 0
    core                    : 0
    VPE                     : 0
    VCED exceptions         : not available
    VCEI exceptions         : not available
    
    processor               : 1
    cpu model               : MIPS 1004Kc V2.15
    BogoMIPS                : 577.53
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 32
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
    isa                     : mips1 mips2 mips32r1 mips32r2
    ASEs implemented        : mips16 dsp mt
    shadow register sets    : 1
    kscratch registers      : 0
    core                    : 0
    VPE                     : 1
    VCED exceptions         : not available
    VCEI exceptions         : not available
    
    processor               : 2
    cpu model               : MIPS 1004Kc V2.15
    BogoMIPS                : 577.53
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 32
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
    isa                     : mips1 mips2 mips32r1 mips32r2
    ASEs implemented        : mips16 dsp mt
    shadow register sets    : 1
    kscratch registers      : 0
    core                    : 1
    VPE                     : 0
    VCED exceptions         : not available
    VCEI exceptions         : not available
    
    processor               : 3
    cpu model               : MIPS 1004Kc V2.15
    BogoMIPS                : 577.53
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 32
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
    isa                     : mips1 mips2 mips32r1 mips32r2
    ASEs implemented        : mips16 dsp mt
    shadow register sets    : 1
    kscratch registers      : 0
    core                    : 1
    VPE                     : 1
    VCED exceptions         : not available
    VCEI exceptions         : not available
    

  • cat /proc/meminfo
    root@MT7621:/# cat /proc/meminfo
    MemTotal:         250236 kB
    MemFree:          226360 kB
    Buffers:            1284 kB
    Cached:             2704 kB
    SwapCached:            0 kB
    Active:             1580 kB
    Inactive:           2964 kB
    Active(anon):        560 kB
    Inactive(anon):        4 kB
    Active(file):       1020 kB
    Inactive(file):     2960 kB
    Unevictable:           0 kB
    Mlocked:               0 kB
    SwapTotal:             0 kB
    SwapFree:              0 kB
    Dirty:                 0 kB
    Writeback:             0 kB
    AnonPages:           564 kB
    Mapped:              592 kB
    Shmem:                 4 kB
    Slab:               8168 kB
    SReclaimable:        460 kB
    SUnreclaim:         7708 kB
    KernelStack:         368 kB
    PageTables:           88 kB
    NFS_Unstable:          0 kB
    Bounce:                0 kB
    WritebackTmp:          0 kB
    CommitLimit:      125116 kB
    Committed_AS:       1752 kB
    VmallocTotal:    1048372 kB
    VmallocUsed:       10864 kB
    VmallocChunk:    1037300 kB
    

  • cat /proc/mtd
    root@MT7621:/# cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 02000000 00010000 "ALL"
    mtd1: 00030000 00010000 "Bootloader"
    mtd2: 00010000 00010000 "Config"
    mtd3: 00010000 00010000 "Factory"
    mtd4: 01800000 00010000 "firmware"
    mtd5: 00a00000 00010000 "kernel"
    mtd6: 00e00000 00010000 "rootfs"
    mtd7: 00400000 00010000 "tm_pattern"
    mtd8: 00100000 00010000 "tm_key"
    mtd9: 000b0000 00010000 "nvram"
    mtd10: 00200000 00010000 "rootfs_data"
    mtd11: 01d00000 00010000 "all_fw_tm"
    

  • cat /sbin/mtk_led | head -n 10
    root@MT7621:/# cat /sbin/mtk_led | head -n 10
    #!/bin/sh
    
    PWR_LED_R=16
    PWR_LED_G=7
    PWR_LED_B=8
    WPS_LED=15
    DBDC=$(uci -q get qcawifi.wlan0.dbdc)
    DBDC_2G_LED=3
    DBDC_5G_LED=4
    
    

  • switch vlan dump
    root@MT7621:/# switch vlan dump
      vid  fid  portmap    s-tag
        1    0  -111111-       0
        2    0  1----11-       0
        3    0  invalid
        4    0  invalid
        5    0  invalid
        6    0  invalid
        7    0  invalid
        8    0  invalid
        9    0  invalid
       10    0  invalid
       11    0  invalid
       12    0  invalid
       13    0  invalid
       14    0  invalid
       15    0  invalid
       16    0  invalid
    

  • uname -a
    
    

  • uname -a
    
    

  • uname -a
    
    

  • bootlog
    
    ===================================================================
                    MT7621   stage1 code 10:33:55 (ASIC)
                    CPU=500000000 HZ BUS=166666666 HZ
    ==================================================================
    Change MPLL source from XTAL to CR...
    do MEMPLL setting..
    MEMPLL Config : 0x11100000
    3PLL mode + External loopback
    === XTAL-40Mhz === DDR-1200Mhz ===
    PLL2 FB_DL: 0xa, 1/0 = 601/423 29000000
    PLL3 FB_DL: 0xb, 1/0 = 623/401 2D000000
    PLL4 FB_DL: 0x13, 1/0 = 537/487 4D000000
    do DDR setting..[01F40000]
    Apply DDR3 Setting...(use customer AC)
              0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
          --------------------------------------------------------------------------------
    0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    1
    000E:|    0    0    0    0    0    0    0    0    0    1    1    1    1    1    1    1
    000F:|    0    0    0    0    1    1    1    1    1    1    1    1    1    1    0    0
    0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
    0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
    0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
    rank 0 coarse = 15
    rank 0 fine = 72
    B:|    0    0    0    0    0    0    0    0    1    1    1    0    0    0    0    0
    opt_dle value:9
    DRAMC_R0DELDLY[018]=00001E1F
    ==================================================================
                    RX      DQS perbit delay software calibration 
    ==================================================================
    1.0-15 bit dq delay value
    ==================================================================
    bit|     0  1  2  3  4  5  6  7  8  9
    --------------------------------------
    0 |    6 7 7 9 7 7 7 6 7 5 
    10 |    9 8 9 9 8 10 
    --------------------------------------
    
    ==================================================================
    2.dqs window
    x=pass dqs delay value (min~max)center 
    y=0-7bit DQ of every group
    input delay:DQS0 =31 DQS1 = 30
    ==================================================================
    bit     DQS0     bit      DQS1
    0  (1~59)30  8  (1~59)30
    1  (1~58)29  9  (1~58)29
    2  (1~58)29  10  (1~58)29
    3  (1~60)30  11  (1~58)29
    4  (1~60)30  12  (1~60)30
    5  (1~60)30  13  (1~59)30
    6  (1~59)30  14  (1~59)30
    7  (1~61)31  15  (1~60)30
    ==================================================================
    3.dq delay value last
    ==================================================================
    bit|    0  1  2  3  4  5  6  7  8   9
    --------------------------------------
    0 |    7 9 9 10 8 8 8 6 7 6 
    10 |    10 9 9 9 8 10 
    ==================================================================
    ==================================================================
         TX  perbyte calibration 
    ==================================================================
    DQS loop = 15, cmp_err_1 = ffff0000 
    dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1 
    dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2 
    DQ loop=15, cmp_err_1 = ffff0000
    dqs_perbyte_dly.last_dqdly_pass[0]=15,  finish count=1 
    dqs_perbyte_dly.last_dqdly_pass[1]=15,  finish count=2 
    byte:0, (DQS,DQ)=(8,8)
    byte:1, (DQS,DQ)=(8,8)
    20,data:88
    [EMI] DRAMC calibration passed
    
    ===================================================================
                    MT7621   stage1 code done 
                    CPU=500000000 HZ BUS=166666666 HZ
    ===================================================================
    
    
    U-Boot 1.1.3 (Nov 20 2018 - 18:09:19)
    
    Board: Ralink APSoC DRAM:  256 MB
    relocate_code Pointer at: 8ffb4000
    
    Config XHCI 40M PLL 
    flash manufacture id: c2, device id 20 19
    find flash: MX25L25635E
    ============================================ 
    Ralink UBoot Version: 5.0.0.0
    -------------------------------------------- 
    ASIC MT7621A DualCore (MAC to MT7530 Mode)
    DRAM_CONF_FROM: Auto-Detection 
    DRAM_TYPE: DDR3 
    DRAM bus: 16 bit
    Xtal Mode=3 OCP Ratio=1/3
    Flash component: SPI Flash
    Date:Nov 20 2018  Time:18:09:19
    ============================================ 
    icache: sets:256, ways:4, linesz:32 ,total:32768
    dcache: sets:256, ways:4, linesz:32 ,total:32768 
    
     ##### The CPU freq = 880 MHZ #### 
     estimate memory size =256 Mbytes
    #Reset_MT7530
    set LAN/WAN WLLLL
    
    Please choose the operation: 
       1: Load system code to SDRAM via TFTP. 
       2: Load system code then write to Flash via TFTP. 
       3: Boot system code via Flash (default).
       4: Entr boot command line interface.
       7: Load Boot Loader code then write to Flash via Serial. 
       9: Load Boot Loader code then write to Flash via TFTP.                                                                                           0 
       
    3: System Boot system code via Flash.
    ## Booting image at bc050000 ...
       Image Name:   MIPS OpenWrt Linux-3.10
       Image Type:   MIPS Linux Kernel Image (lzma compressed)
       Data Size:    17170368 Bytes = 16.4 MB
       Load Address: 81001000
       Entry Point:  8162d1c0
       Verifying Checksum ... OK
       Uncompressing Kernel Image ... OK
    No initrd
    ## Transferring control to Linux (at address 8162d1c0) ...
    ## Giving linux memsize in MB, 256
    
    Starting kernel ...
    
    
    LINUX started...
    
     THIS IS ASIC
    
    SDK 5.0.S.0
    [    0.000000] Linux version 3.10.14 (eason@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r48067) ) #6 SMP Tue Oct 29 14:31:40 CST 2019
    [    0.000000] 
    [    0.000000]  The CPU feqenuce set to 880 MHz
    [    0.000000] GCMP present
    [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
    [    0.000000] Software DMA cache coherency
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 10000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00000000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x0fffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00000000-0x0fffffff]
    [    0.000000] Detected 3 available secondary CPU(s)
    [    0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    [    0.000000] PERCPU: Embedded 7 pages/cpu @81b92000 s6848 r8192 d13632 u32768
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    [    0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock6 init=/etc/preinit
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Writing ErrCtl register=00074157
    [    0.000000] Readback ErrCtl register=00074157
    [    0.000000] Memory: 249976k/262144k available (6366k kernel code, 12168k reserved, 2264k data, 260k init, 0k highmem)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:128
    [    0.000000] console [ttyS1] enabled
    [    0.120000] Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
    [    0.160000] pid_max: default: 32768 minimum: 301
    [    0.164000] Mount-cache hash table entries: 512
    [    0.168000] launch: starting cpu1
    [    0.172000] launch: cpu1 gone!
    [    0.172000] CPU1 revision is: 0001992f (MIPS 1004Kc)
    [    0.172000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
    [    0.172000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.172000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    [    0.204000] Synchronize counters for CPU 1: done.
    [    0.212000] launch: starting cpu2
    [    0.216000] launch: cpu2 gone!
    [    0.216000] CPU2 revision is: 0001992f (MIPS 1004Kc)
    [    0.216000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
    [    0.216000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.216000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    [    0.248000] Synchronize counters for CPU 2: done.
    [    0.256000] launch: starting cpu3
    [    0.260000] launch: cpu3 gone!
    [    0.260000] CPU3 revision is: 0001992f (MIPS 1004Kc)
    [    0.260000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
    [    0.260000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
    [    0.260000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
    [    0.288000] Synchronize counters for CPU 3: done.
    [    0.296000] Brought up 4 CPUs
    [    0.300000] NET: Registered protocol family 16
    [    0.600000] release PCIe RST: RALINK_RSTCTRL = 7000000
    [    0.604000] PCIE PHY initialize
    [    0.608000] ***** Xtal 40MHz *****
    [    0.612000] start MT7621 PCIe register access
    [    1.204000] RALINK_RSTCTRL = 7000000
    [    1.208000] RALINK_CLKCFG1 = 77ffeff8
    [    1.212000] 
    [    1.212000] *************** MT7621 PCIe RC mode *************
    [    1.708000] PCIE2 no card, disable it(RST&CLK)
    [    1.712000] pcie_link status = 0x3
    [    1.716000] RALINK_RSTCTRL= 3000000
    [    1.720000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
    [    1.724000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
    [    1.728000] PCIE0 enabled
    [    1.732000] PCIE1 enabled
    [    1.736000] interrupt enable status: 300000
    [    1.740000] Port 1 N_FTS = 1b105000
    [    1.744000] Port 0 N_FTS = 1b105000
    [    1.748000] config reg done
    [    1.752000] init_rt2880pci done
    [    1.768000] bio: create slab  at 0
    [    1.772000] vgaarb: loaded
    [    1.776000] SCSI subsystem initialized
    [    1.784000] PCI host bridge to bus 0000:00
    [    1.792000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
    [    1.804000] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
    [    1.820000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [    1.836000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    1.852000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    1.868000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
    [    1.880000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
    [    1.896000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
    [    1.908000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
    [    1.920000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
    [    1.936000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
    [    1.948000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
    [    1.964000] pci 0000:00:00.0: PCI bridge to [bus 01]
    [    1.972000] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
    [    1.988000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
    [    2.000000] pci 0000:00:01.0: PCI bridge to [bus 02]
    [    2.012000] pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
    [    2.024000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
    [    2.036000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
    [    2.048000] BAR0 at slot 0 = 0
    [    2.052000] bus=0x0, slot = 0x0
    [    2.060000] res[0]->start = 0
    [    2.064000] res[0]->end = 0
    [    2.072000] res[1]->start = 60200000
    [    2.076000] res[1]->end = 6020ffff
    [    2.084000] res[2]->start = 0
    [    2.088000] res[2]->end = 0
    [    2.096000] res[3]->start = 0
    [    2.100000] res[3]->end = 0
    [    2.108000] res[4]->start = 0
    [    2.112000] res[4]->end = 0
    [    2.120000] res[5]->start = 0
    [    2.124000] res[5]->end = 0
    [    2.128000] BAR0 at slot 1 = 0
    [    2.136000] bus=0x0, slot = 0x1
    [    2.144000] res[0]->start = 0
    [    2.148000] res[0]->end = 0
    [    2.152000] res[1]->start = 60210000
    [    2.160000] res[1]->end = 6021ffff
    [    2.168000] res[2]->start = 0
    [    2.172000] res[2]->end = 0
    [    2.180000] res[3]->start = 0
    [    2.184000] res[3]->end = 0
    [    2.192000] res[4]->start = 0
    [    2.196000] res[4]->end = 0
    [    2.200000] res[5]->start = 0
    [    2.208000] res[5]->end = 0
    [    2.212000] bus=0x1, slot = 0x0, irq=0x4
    [    2.220000] res[0]->start = 60000000
    [    2.228000] res[0]->end = 600fffff
    [    2.236000] res[1]->start = 0
    [    2.240000] res[1]->end = 0
    [    2.248000] res[2]->start = 0
    [    2.252000] res[2]->end = 0
    [    2.256000] res[3]->start = 0
    [    2.264000] res[3]->end = 0
    [    2.268000] res[4]->start = 0
    [    2.276000] res[4]->end = 0
    [    2.280000] res[5]->start = 0
    [    2.288000] res[5]->end = 0
    [    2.292000] bus=0x2, slot = 0x1, irq=0x18
    [    2.300000] res[0]->start = 60100000
    [    2.308000] res[0]->end = 601fffff
    [    2.312000] res[1]->start = 0
    [    2.320000] res[1]->end = 0
    [    2.324000] res[2]->start = 0
    [    2.332000] res[2]->end = 0
    [    2.336000] res[3]->start = 0
    [    2.344000] res[3]->end = 0
    [    2.348000] res[4]->start = 0
    [    2.352000] res[4]->end = 0
    [    2.360000] res[5]->start = 0
    [    2.364000] res[5]->end = 0
    [    2.372000] Switching to clocksource MIPS
    [    2.380000] NET: Registered protocol family 2
    [    2.388000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    [    2.404000] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    2.416000] TCP: Hash tables configured (established 2048 bind 2048)
    [    2.428000] TCP: reno registered
    [    2.436000] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    2.448000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    2.460000] NET: Registered protocol family 1
    [    2.468000] RPC: Registered named UNIX socket transport module.
    [    2.480000] RPC: Registered udp transport module.
    [    2.488000] RPC: Registered tcp transport module.
    [    2.500000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    2.512000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    2.524000] jffs2: version 2.2. (NAND) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    2.544000] fuse init (API version 7.22)
    [    2.552000] msgmni has been set to 488
    [    2.560000] io scheduler noop registered (default)
    [    2.572000] reg_int_mask=0, INT_MASK= 0 
    [    2.580000] HSDMA_init
    [    2.584000] 
    [    2.584000]  hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000
    [    2.600000] 
    [    2.600000]  hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000
    [    2.616000] TX_CTX_IDX0 = 0
    [    2.624000] TX_DTX_IDX0 = 0
    [    2.628000] RX_CRX_IDX0 = 3ff
    [    2.636000] RX_DRX_IDX0 = 0
    [    2.640000] set_fe_HSDMA_glo_cfg
    [    2.648000] HSDMA_GLO_CFG = 465
    [    2.652000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    [    2.668000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
    [    2.680000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
    [    2.692000] Ralink gpio driver initialized
    [    2.704000] brd: module loaded
    [    2.712000] flash manufacture id: c2, device id 20 19
    [    2.724000] MX25L25635E(c2 2019c220) (32768 Kbytes)
    [    2.732000] mtd .name = raspi, .size = 0x02000000 (32M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
    [    2.752000] Creating 12 MTD partitions on "raspi":
    [    2.760000] 0x000000000000-0x000002000000 : "ALL"
    [    2.772000] 0x000000000000-0x000000030000 : "Bootloader"
    [    2.784000] 0x000000030000-0x000000040000 : "Config"
    [    2.792000] 0x000000040000-0x000000050000 : "Factory"
    [    2.804000] 0x000000050000-0x000001850000 : "firmware"
    [    2.812000] 0x000000050000-0x000000a50000 : "kernel"
    [    2.824000] 0x000000a50000-0x000001850000 : "rootfs"
    [    2.836000] 0x000001850000-0x000001c50000 : "tm_pattern"
    [    2.844000] 0x000001c50000-0x000001d50000 : "tm_key"
    [    2.856000] 0x000001d50000-0x000001e00000 : "nvram"
    [    2.868000] 0x000001e00000-0x000002000000 : "rootfs_data"
    [    2.876000] 0x000000050000-0x000001d50000 : "all_fw_tm"
    [    2.888000] PPP generic driver version 2.4.2
    [    2.896000] PPP BSD Compression module registered
    [    2.908000] PPP MPPE Compression module registered
    [    2.916000] NET: Registered protocol family 24
    [    2.924000] PPTP driver version 0.8.5
    [    2.932000] register mt_drv
    [    2.948000] 
    [    2.948000] 
    [    2.948000] === pAd = c0201000, size = 3858008 ===
    [    2.948000] 
    [    2.968000] PciHif.CSRBaseAddress =0xc0100000, csr_addr=0xc0100000!
    [    2.988000] RTMPInitPCIeDevice():device_id=0x7615
    [    3.000000] DriverOwn()::Try to Clear FW Own...
    [    3.304000] DriverOwn()::Success to clear FW Own
    [    3.312000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
    [    3.328000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
    [    3.336000] RtmpChipOpsHook(492): Not support for HIF_MT yet! MACVersion=0x0
    [    3.352000] mt7615_init()-->
    [    3.356000] Use 1st iPAiLNA default bin.
    [    3.364000] Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin.
    [    3.376000] <--mt7615_init()
    [    3.384000] ChipOpsMCUHook
    [    3.396000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
    [    3.412000] cut_through_token_list_init(): 8f72e208,8f72e208
    [    3.424000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
    [    3.436000] cut_through_token_list_init(): 8f72e218,8f72e218
    [    3.448000] <-- RTMPAllocTxRxRingMemory, Status=0
    [    3.468000] 
    [    3.468000] 
    [    3.468000] === pAd = c0701000, size = 3858008 ===
    [    3.468000] 
    [    3.488000] PciHif.CSRBaseAddress =0xc0600000, csr_addr=0xc0600000!
    [    3.512000] RTMPInitPCIeDevice():device_id=0x7615
    [    3.520000] DriverOwn()::Try to Clear FW Own...
    [    3.824000] DriverOwn()::Success to clear FW Own
    [    3.836000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
    [    3.848000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
    [    3.860000] RtmpChipOpsHook(492): Not support for HIF_MT yet! MACVersion=0x0
    [    3.872000] mt7615_init()-->
    [    3.880000] Use 2nd iPAiLNA default bin.
    [    3.888000] Use 1st /etc_ro/wlan/MT7615E_EEPROM2.bin default bin.
    [    3.900000] <--mt7615_init()
    [    3.904000] ChipOpsMCUHook
    [    3.916000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
    [    3.932000] cut_through_token_list_init(): 8ecc5388,8ecc5388
    [    3.944000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
    [    3.960000] cut_through_token_list_init(): 8ecc5398,8ecc5398
    [    3.972000] skb_free start address is 0x8edf26cc.
    [   19.352000] free_txd: 00cb0010, ei_local->cpu_ptr: 00CB0000
    [   19.364000]  POOL  HEAD_PTR | DMA_PTR | CPU_PTR 
    [   19.372000] ----------------+---------+--------
    [   19.384000]      0xa0cb0000 0x00CB0000 0x00CB0000
    [   19.392000] 
    [   19.392000] phy_qrx_ring = 0x00caa000, qrx_ring = 0xa0caa000
    [   19.408000] 
    [   19.408000] phy_rx_ring0 = 0x00cac000, rx_ring[0] = 0xa0cac000
    [   19.444000] MT7530 Reset Completed!!
    [   19.456000] change HW-TRAP to 0x117c8f
    [   19.464000] set LAN/WAN WLLLL
    [   19.476000] GMAC1_MAC_ADRH -- : 0x000004ab
    [   19.484000] GMAC1_MAC_ADRL -- : 0x18523283
    [   19.492000] GDMA2_MAC_ADRH -- : 0x000004ab
    [   19.500000] GDMA2_MAC_ADRL -- : 0x18523284
    [   19.512000] eth3: ===> VirtualIF_open
    [   19.516000] MT7621 GE2 link rate to 1G
    [   19.524000] CDMA_CSG_CFG = 81000000
    [   19.532000] GDMA1_FWD_CFG = 20710000
    [   19.540000] GDMA2_FWD_CFG = 20710000
    [   19.560000] eth3: ===> VirtualIF_open
    [   20.024000] eth3: ===> VirtualIF_close
    [   20.040000] ra2880stop()...Done
    [   20.044000] eth3: ===> VirtualIF_close
    [   20.056000] Free TX/RX Ring Memory!
    [   20.068000]  4:FFFFFFAB:18:52:32:FFFFFF83
    [   20.076000] Raeth v3.1 (Tasklet)
    [   20.088000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
    [   20.104000] phy_free_head is 0xca8000!!!
    [   20.112000] phy_free_tail_phy is 0xca9ff0!!!
    [   20.120000] txd_pool=a0cb0000 phy_txd_pool=00CB0000
    [   20.128000] ei_local->skb_free start address is 0x8edf26cc.
    [   20.140000] free_txd: 00cb0010, ei_local->cpu_ptr: 00CB0000
    [   20.152000]  POOL  HEAD_PTR | DMA_PTR | CPU_PTR 
    [   20.160000] ----------------+---------+--------
    [   20.168000]      0xa0cb0000 0x00CB0000 0x00CB0000
    [   20.180000] 
    [   20.180000] phy_qrx_ring = 0x00caa000, qrx_ring = 0xa0caa000
    [   20.196000] 
    [   20.196000] phy_rx_ring0 = 0x00cac000, rx_ring[0] = 0xa0cac000
    [   20.232000] MT7530 Reset Completed!!
    [   20.244000] change HW-TRAP to 0x117c8f
    [   20.252000] set LAN/WAN WLLLL
    [   20.264000] GMAC1_MAC_ADRH -- : 0x000004ab
    [   20.272000] GMAC1_MAC_ADRL -- : 0x18523283
    [   20.280000] eth3: ===> VirtualIF_open
    [   20.288000] MT7621 GE2 link rate to 1G
    [   20.288000] CDMA_CSG_CFG = 81000000
    [   20.288000] GDMA1_FWD_CFG = 20710000
    [   20.288000] GDMA2_FWD_CFG = 20710000
    [   20.316000] device eth2 entered promiscuous mode
    [   20.328000] br-lan: port 1(eth2) entered forwarding state
    [   20.340000] br-lan: port 1(eth2) entered forwarding state
    [   20.360000] eth3: ===> VirtualIF_open
    dnsmasq
    dnsmasq [br-lan]
    [   22.344000] br-lan: port 1(eth2) entered forwarding state
    UHTTP crt Checked
    main init
    main init
    page=[/setup/index.html]
    count=[43]
    page=[/setup/index.html]
    count=[43]
    [   26.328000] Ralink HW NAT Module Enabled
    [   26.336000] eth2 ifindex =4
    [   26.344000] eth3 ifindex =b
    [   27.840000] jffs2: notice: (2248) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    [   28.988000] jffs2: notice: (2369) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
    NO COPY updated DPI
    0x007f
    [   30.108000] DriverOwn()::Return since already in Driver Own...
    [   30.124000] APWdsInitialize():WdsEntry[0]
    [   30.132000] APWdsInitialize():WdsEntry[1]
    [   30.140000] APWdsInitialize():WdsEntry[2]
    [   30.148000] APWdsInitialize():WdsEntry[3]
    [   30.160000] 
    [   30.160000] [Force Roam] => Force Roam Support = 0
    [   30.172000] RT_CfgSetMacAddress : invalid length (0)
    [   30.180000] E2pAccessMode=2
    [   30.188000] SSID[0]=elecom-523283, EdcaIdx=0
    [   30.196000] TriBandChGrp=0/0/0/0
    [   30.204000] cfg_mode=14
    [   30.212000] cfg_mode=14
    [   30.216000] wmode_band_equal(): Band Equal!
    [   30.224000] BandSteering=0
    [   30.232000] BndStrgBssIdx=
    [   30.236000] [TxPower] BAND0: 100 
    [   30.244000] [SKUenable] BAND0: 1 
    [   30.252000] [PERCENTAGEenable] BAND0: 1 
    [   30.260000] [BFBACKOFFenable] BAND0: 1 
    [   30.268000] CalCacheApply = 0 
    [   30.272000] APEdca0
    [   30.280000] APEdca1
    [   30.284000] APEdca2
    [   30.288000] APEdca3
    [   30.296000] APSDCapable[0]=0
    [   30.300000] APSDCapable[1]=0
    [   30.308000] APSDCapable[2]=0
    [   30.312000] APSDCapable[3]=0
    [   30.320000] APSDCapable[4]=0
    [   30.324000] APSDCapable[5]=0
    [   30.332000] APSDCapable[6]=0
    [   30.336000] APSDCapable[7]=0
    [   30.344000] APSDCapable[8]=0
    [   30.348000] APSDCapable[9]=0
    [   30.352000] APSDCapable[10]=0
    [   30.360000] APSDCapable[11]=0
    [   30.364000] APSDCapable[12]=0
    [   30.372000] APSDCapable[13]=0
    [   30.376000] APSDCapable[14]=0
    [   30.384000] APSDCapable[15]=0
    [   30.388000] default ApCliAPSDCapable[0]=0
    [   30.400000] default ApCliAPSDCapable[1]=0
    [   30.408000] DfsZeroWait Support=0/0 
    [   30.416000] DfsZeroWaitCacTime=0/0 
    [   30.464000] rtmp_read_wds_from_file(): WDS Profile
    [   30.472000] APWdsInitialize():WdsEntry[0]
    [   30.480000] APWdsInitialize():WdsEntry[1]
    [   30.488000] APWdsInitialize():WdsEntry[2]
    [   30.496000] APWdsInitialize():WdsEntry[3]
    [   30.504000] WDS-Enable mode=0
    [   30.512000] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
    [   30.536000] HT: WDEV[0] Ext Channel = ABOVE
    [   30.548000] HT: greenap_cap = 0
    [   30.608000] IcapMode = 0
    [   30.624000] WtcSetMaxStaNum: MaxStaNum:103, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:16, MinMcastWcid:125
    [   30.644000] Top Init Done!
    [   30.648000] Use alloc_skb
    [   30.648000] tdts: module license 'Proprietary' taints kernel.
    [   30.648000] Disabling lock debugging due to kernel taint
    [   30.680000] RX[0] DESC a0ca4000 size = 16384
    [   30.680000] Init chrdev /dev/detector with major 190
    [   30.680000] tdts: tcp_conn_max = 4000
    [   30.680000] 
    [   30.680000] tdts: tcp_conn_timeout = 300 sec
    [   30.680000] 
    [   30.720000] RX[1] DESC a0ca2000 size = 8192
    [   30.732000] Hif Init Done!
    [   30.740000] ctl->txq = c0aa9e6c
    [   30.744000] ctl->rxq = c0aa9e78
    [   30.752000] ctl->ackq = c0aa9e84
    [   30.756000] ctl->kickq = c0aa9e90
    [   30.764000] ctl->tx_doneq = c0aa9e9c
    [   30.772000] ctl->rx_doneq = c0aa9ea8
    [   30.780000] mt7615_fw_prepare():FW(8a10), HW(8a10), CHIPID(7615))
    [   30.792000] mt7615_fw_prepare(2687): MT7615_E3, USE E3 patch and ram code binary image
    [   30.808000] AndesMTLoadRomMethodFwDlRing(1035), cap->rom_patch_len(11102)
    [   30.820000] AndesRestartCheck: Current TOP_MISC2(0x1)
    [   30.832000] AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
    [   30.844000] 20170809192718a
    [   30.852000] 
    [   30.852000] platform = 
    [   30.860000] ALPS
    [   30.864000] hw/sw version = 
    [   30.868000] 8a108a10
    [   30.872000] patch version = 
    [   30.880000] 00000010
    [   30.884000] Patch SEM Status=2
    [   30.888000] MtCmdPatchSemGet:(ret = 0)
    [   30.896000] 
    [   30.896000] Patch is not ready && get semaphore success, SemStatus(2)
    [   30.912000] EventGenericEventHandler: CMD Success
    [   30.924000] MtCmdAddressLenReq:(ret = 0)
    [   30.932000] MtCmdPatchFinishReq
    [   30.948000] EventGenericEventHandler: CMD Success
    [   30.960000] Send checksum req..
    [   30.964000] Patch SEM Status=3
    [   30.972000] MtCmdPatchSemGet:(ret = 0)
    [   30.980000] 
    [   30.980000] Release patch semaphore, SemStatus(3)
    [   30.992000] AndesMTEraseRomPatch
    [   30.996000] WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
    [   30.996000] SHN Release Version: 1.0.0 RELS_0003
    [   30.996000] UDB Core Version: 0.2.18
    [   30.996000] Init chrdev /dev/idpfw with major 191
    [   31.036000] AndesMTLoadFwMethodFwDlRing(809), cap->fw_len(462248)
    [   31.048000] Build Date:_201708190346
    [   31.056000] Build Date:_201708190346
    [   31.064000] AndesRestartCheck: Current TOP_MISC2(0x1)
    [   31.072000] AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
    [   31.088000] EventGenericEventHandler: CMD Success
    [   31.096000] MtCmdAddressLenReq:(ret = 0)
    [   31.108000] EventGenericEventHandler: CMD Success
    [   31.120000] MtCmdAddressLenReq:(ret = 0)
    [   31.128000] IDPfw: IDPfw is ready
    [   31.128000] MtCmdFwStartReq: override = 1, address = 540672
    [   31.128000] EventGenericEventHandler: CMD Success
    [   31.128000] Build Date:_201707211524
    [   31.128000] EventGenericEventHandler: CMD Success
    [   31.128000] MtCmdAddressLenReq:(ret = 0)
    [   31.128000] MtCmdFwStartReq: override = 4, address = 0
    [   31.180000] EventGenericEventHandler: CMD Success
    [   31.196000] sizeof forward pkt param = 192
    Running license control..waiting 25 second ...
    [   31.236000] WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
    [   31.248000] MCU Init Done!
    [   31.252000] efuse_probe: efuse = 10000212
    [   31.260000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
    [   31.272000] RtmpEepromGetDefault::e2p_dafault=1
    [   31.280000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
    [   31.296000] NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000]
    [   31.320000] NICReadEEPROMParameters: EEPROM 0x52 b317
    [   31.336000] MtCmdSetTxLpfCal:(ret = 0)
    [   31.344000] MtCmdSetTxIqCal:(ret = 0)
    [   31.352000] MtCmdSetTxDcCal:(ret = 0)
    [   31.360000] MtCmdSetRxFiCal:(ret = 0)
    [   31.368000] MtCmdSetRxFdCal:(ret = 0)
    [   31.372000] MtCmdSetRxFdCal:(ret = 0)
    [   31.380000] MtCmdSetRxFdCal:(ret = 0)
    [   31.388000] MtCmdSetRxFdCal:(ret = 0)
    [   31.396000] MtCmdSetRxFdCal:(ret = 0)
    [   31.404000] MtCmdSetRxFdCal:(ret = 0)
    [   31.412000] MtCmdSetRxFdCal:(ret = 0)
    [   31.416000] MtCmdSetRxFdCal:(ret = 0)
    [   31.424000] MtCmdSetRxFdCal:(ret = 0)
    [   31.432000] NICReadEEPROMParameters: EEPROM 0x52 b317
    [   31.984000] Country Region from e2p = 101
    [   31.992000] mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
    [   32.004000] mt7615_antenna_default_reset(): DBDC 2G TxPath = 2, 2G RxPath = 2
    [   32.020000] mt7615_antenna_default_reset(): DBDC 5G TxPath = 2, 2G RxPath = 2
    [   32.032000] rtmp_read_txpwr_from_eeprom(233): Don't Support this now!
    [   32.044000] RTMPReadTxPwrPerRate(1381): Don't Support this now!
    [   32.056000] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
    [   32.068000] RcRadioInit(): pRadioCtrl=8ecc6438,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
    [   32.084000] Band Rf: 1, Phy Mode: 2
    [   32.092000] AntCfgInit(2766): Not support for HIF_MT yet!
    [   32.104000] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
    [   32.144000] MtBfBackOffLoadTable: RF_LOCKDOWN Feature OFF !!!
    [   32.228000] EEPROM Init Done!
    [   32.232000] mt_mac_init()-->
    [   32.240000] mt_mac_pse_init(2750): Don't Support this now!
    [   32.248000] mt7615_init_mac_cr()-->
    [   32.256000] mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
    [   32.268000] MtAsicSetMacMaxLen(1300): Not finish Yet!
    [   32.276000] 
    [   32.432000] ApAutoChannelAtBootUp: AutoChannelBootup = 1, AutoChannelFlag = 1
    [   32.448000] MtCmdSetMacTxRx:(ret = 0)
    [   32.456000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210]  offset [1900] 
    [   32.472000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   32.484000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98] 
    [   32.500000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   32.512000] MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0 
    [   32.528000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   32.748000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210]  offset [1900] 
    [   32.764000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   32.772000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98] 
    [   32.792000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   32.800000] MtCmdChannelSwitch: control_chl = 40,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0 
    [   32.820000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   33.040000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210]  offset [1900] 
    [   33.056000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   33.064000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98] 
    [   33.084000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   33.092000] MtCmdChannelSwitch: control_chl = 44,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0 
    [   33.112000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   33.400000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210]  offset [1900] 
    [   33.416000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   33.424000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98] 
    [   33.444000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   33.452000] MtCmdChannelSwitch: control_chl = 48,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0 
    [   33.472000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   33.692000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290]  offset [1a00] 
    [   33.708000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   33.716000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8] 
    [   33.736000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   33.744000] MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 
    [   33.764000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   34.004000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290]  offset [1a00] 
    [   34.020000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   34.028000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8] 
    [   34.048000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   34.056000] MtCmdChannelSwitch: control_chl = 56,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 
    [   34.076000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   34.436000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290]  offset [1a00] 
    [   34.452000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   34.460000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8] 
    [   34.480000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   34.488000] MtCmdChannelSwitch: control_chl = 60,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 
    [   34.508000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   34.848000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290]  offset [1a00] 
    [   34.864000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   34.872000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8] 
    [   34.892000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   34.900000] MtCmdChannelSwitch: control_chl = 64,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 
    [   34.920000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   35.140000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530]  offset [1d00] 
    [   35.156000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   35.164000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18] 
    [   35.184000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   35.192000] MtCmdChannelSwitch: control_chl = 100,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0 
    [   35.212000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   35.468000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530]  offset [1d00] 
    [   35.484000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   35.492000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18] 
    [   35.512000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   35.524000] MtCmdChannelSwitch: control_chl = 104,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0 
    [   35.540000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   35.872000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530]  offset [1d00] 
    [   35.888000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   35.896000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18] 
    [   35.916000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   35.928000] MtCmdChannelSwitch: control_chl = 108,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0 
    [   35.944000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   36.288000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530]  offset [1d00] 
    [   36.304000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   36.312000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18] 
    [   36.332000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   36.344000] MtCmdChannelSwitch: control_chl = 112,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0 
    [   36.360000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   36.764000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610]  offset [1e00] 
    [   36.780000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   36.788000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78] 
    [   36.808000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   36.820000] MtCmdChannelSwitch: control_chl = 116,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0 
    [   36.836000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   37.056000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610]  offset [1e00] 
    [   37.072000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   37.080000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78] 
    [   37.100000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   37.112000] MtCmdChannelSwitch: control_chl = 120,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0 
    [   37.128000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   37.428000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610]  offset [1e00] 
    [   37.444000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   37.452000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78] 
    [   37.472000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   37.484000] MtCmdChannelSwitch: control_chl = 124,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0 
    [   37.500000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   37.848000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610]  offset [1e00] 
    [   37.864000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   37.872000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78] 
    [   37.892000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   37.904000] MtCmdChannelSwitch: control_chl = 128,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0 
    [   37.920000] BW = 2,TXStream = 4, RXStream = 4, scan(1)
    [   38.324000] ====================================================================
    [   38.336000] Channel  36 : Busy Time =   1420, Skip Channel = FALSE, BwCap = TRUE
    [   38.352000] Channel  40 : Busy Time =    594, Skip Channel = FALSE, BwCap = TRUE
    [   38.368000] Channel  44 : Busy Time =    721, Skip Channel = FALSE, BwCap = TRUE
    [   38.380000] Channel  48 : Busy Time =    990, Skip Channel = FALSE, BwCap = TRUE
    [   38.396000] Channel  52 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.412000] Channel  56 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.424000] Channel  60 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.440000] Channel  64 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.456000] Channel 100 : Busy Time =    301, Skip Channel = FALSE, BwCap = TRUE
    [   38.468000] Channel 104 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.484000] Channel 108 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.500000] Channel 112 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.512000] Channel 116 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.528000] Channel 120 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.544000] Channel 124 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.560000] Channel 128 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
    [   38.572000] ====================================================================
    [   38.588000] Rule 3 Channel Busy time value : Select Primary Channel 52 
    [   38.600000] Rule 3 Channel Busy time value : Min Channel Busy = 0
    [   38.612000] Rule 3 Channel Busy time value : BW = 80
    [   38.624000]  AutoChSelUpdateChannel(): Update channel for wdev0 for this band PhyMode = 49,Channel = 52  
    [   38.644000] ApAutoChannelAtBootUp Force Roam Support = 0
    [   38.732000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=52
    [   38.748000] CountryCode(2.4G/5G)=1/1, RFIC=25, PHY mode(2.4G/5G)=49/49, support 19 channels
    [   38.764000] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
    [   38.776000] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
    [   38.776000]  LinkToOmacIdx = 0, LinkToWdevType = 1
    [   38.804000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO),                 CmdBssInfoBmcRate.u2BcTransmit= 8192,                 CmdBssInfoBmcRate.u2McTransmit = 8196
    [   38.940000]  [RadarStateCheck]Set into RD_SILENCE_MODE!  
    [   38.964000] MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0
    [   38.976000] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0
    [   38.992000] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0
    [   39.004000] mt7615_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=52, HT-CentCh=54, VHT-CentCh=58
    [   39.020000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290]  offset [1a00] 
    [   39.036000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   39.048000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8] 
    [   39.068000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   39.076000] MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0 
    [   39.092000] BW = 2,TXStream = 4, RXStream = 4, scan(0)
    [   39.124000] ap_phy_rrm_init_byRf(): AP Set CentralFreq at 58(Prim=52, HT-CentCh=54, VHT-CentCh=58, BBP_BW=2)
    [   39.144000] [WrapDfsRadarDetectStart]: Band0Ch is 52
    [   39.152000] [WrapDfsRadarDetectStart]: Band1Ch is 0
    [   39.176000] LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
    [   39.188000] MtAsicSetRalinkBurstMode(2605): Not support for HIF_MT yet!
    [   39.200000] MtAsicSetPiggyBack(777): Not support for HIF_MT yet!
    [   39.212000] MtAsicSetTxPreamble(2584): Not support for HIF_MT yet!
    [   39.224000] ap_ftkd> Initialize FT KDP Module...
    [   39.236000] Main bssid = 04:ab:18:52:32:86
    [   39.244000] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
    [   39.252000] MtCmdSetMacTxRx:(ret = 0)
    [   39.260000] MCS Set = ff ff ff ff 01
    [   39.268000]  Force Roam Support = 0
    [   39.836000] RT_CfgSetMacAddress : invalid length (0)
    [   39.848000] E2pAccessMode=2
    [   39.852000] SSID[0]=elecom-523283, EdcaIdx=0
    [   39.864000] TriBandChGrp=0/0/0/0
    [   39.872000] cfg_mode=9
    [   39.876000] cfg_mode=9
    [   39.880000] wmode_band_equal(): Band Equal!
    [   39.888000] BandSteering=0
    [   39.896000] BndStrgBssIdx=
    [   39.900000] [TxPower] BAND0: 100 
    [   39.908000] [SKUenable] BAND0: 1 
    [   39.912000] [PERCENTAGEenable] BAND0: 1 
    [   39.920000] [BFBACKOFFenable] BAND0: 1 
    [   39.928000] CalCacheApply = 0 
    [   39.936000] APEdca0
    [   39.940000] APEdca1
    [   39.944000] APEdca2
    [   39.952000] APEdca3
    [   39.956000] APSDCapable[0]=0
    [   39.964000] APSDCapable[1]=0
    [   39.968000] APSDCapable[2]=0
    [   39.976000] APSDCapable[3]=0
    [   39.980000] APSDCapable[4]=0
    [   39.984000] APSDCapable[5]=0
    [   39.992000] APSDCapable[6]=0
    [   39.996000] APSDCapable[7]=0
    [   40.004000] APSDCapable[8]=0
    [   40.008000] APSDCapable[9]=0
    [   40.016000] APSDCapable[10]=0
    [   40.020000] APSDCapable[11]=0
    [   40.028000] APSDCapable[12]=0
    [   40.032000] APSDCapable[13]=0
    [   40.036000] APSDCapable[14]=0
    [   40.044000] APSDCapable[15]=0
    [   40.048000] default ApCliAPSDCapable[0]=0
    [   40.056000] default ApCliAPSDCapable[1]=0
    [   40.068000] DfsZeroWait Support=0/0 
    [   40.076000] DfsZeroWaitCacTime=0/0 
    [   40.108000] rtmp_read_wds_from_file(): WDS Profile
    [   40.120000] APWdsInitialize():WdsEntry[0]
    [   40.128000] APWdsInitialize():WdsEntry[1]
    [   40.136000] APWdsInitialize():WdsEntry[2]
    [   40.144000] APWdsInitialize():WdsEntry[3]
    [   40.152000] WDS-Enable mode=0
    [   40.160000] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
    [   40.180000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
    [   40.180000] HT: WDEV[0] Ext Channel = ABOVE
    [   40.180000] HT: greenap_cap = 0
    [   40.216000] IcapMode = 0
    [   40.228000] WtcSetMaxStaNum: MaxStaNum:103, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:16, MinMcastWcid:125
    [   40.248000] Top Init Done!
    [   40.252000] Use alloc_skb
    [   40.260000] RX[0] DESC a0c14000 size = 16384
    [   40.268000] RX[1] DESC a0c12000 size = 8192
    [   40.280000] Hif Init Done!
    [   40.284000] ctl->txq = c05a9e6c
    [   40.292000] ctl->rxq = c05a9e78
    [   40.296000] ctl->ackq = c05a9e84
    [   40.304000] ctl->kickq = c05a9e90
    [   40.312000] ctl->tx_doneq = c05a9e9c
    [   40.316000] ctl->rx_doneq = c05a9ea8
    [   40.324000] mt7615_fw_prepare():FW(8a10), HW(8a10), CHIPID(7615))
    [   40.340000] mt7615_fw_prepare(2687): MT7615_E3, USE E3 patch and ram code binary image
    [   40.352000] AndesMTLoadRomMethodFwDlRing(1035), cap->rom_patch_len(11102)
    [   40.368000] AndesRestartCheck: Current TOP_MISC2(0x1)
    [   40.376000] AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
    [   40.392000] 20170809192718a
    [   40.396000] 
    [   40.400000] platform = 
    [   40.404000] ALPS
    [   40.408000] hw/sw version = 
    [   40.416000] 8a108a10
    [   40.420000] patch version = 
    [   40.424000] 00000010
    [   40.428000] Patch SEM Status=2
    [   40.436000] MtCmdPatchSemGet:(ret = 0)
    [   40.444000] 
    [   40.444000] Patch is not ready && get semaphore success, SemStatus(2)
    [   40.460000] EventGenericEventHandler: CMD Success
    [   40.468000] MtCmdAddressLenReq:(ret = 0)
    [   40.476000] MtCmdPatchFinishReq
    [   40.492000] EventGenericEventHandler: CMD Success
    [   40.504000] Send checksum req..
    [   40.508000] Patch SEM Status=3
    [   40.516000] MtCmdPatchSemGet:(ret = 0)
    [   40.524000] 
    [   40.524000] Release patch semaphore, SemStatus(3)
    [   40.536000] AndesMTEraseRomPatch
    [   40.540000] WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
    [   40.552000] AndesMTLoadFwMethodFwDlRing(809), cap->fw_len(462248)
    [   40.564000] Build Date:_201708190346
    [   40.572000] Build Date:_201708190346
    [   40.580000] AndesRestartCheck: Current TOP_MISC2(0x1)
    [   40.592000] AndesRestartCheck: (TOP_MISC2 = 1), ready to continue...RET(0)
    [   40.604000] EventGenericEventHandler: CMD Success
    [   40.612000] MtCmdAddressLenReq:(ret = 0)
    [   40.628000] EventGenericEventHandler: CMD Success
    [   40.636000] MtCmdAddressLenReq:(ret = 0)
    [   40.644000] MtCmdFwStartReq: override = 1, address = 540672
    [   40.656000] EventGenericEventHandler: CMD Success
    [   40.664000] Build Date:_201707211524
    [   40.672000] EventGenericEventHandler: CMD Success
    [   40.680000] MtCmdAddressLenReq:(ret = 0)
    [   40.692000] MtCmdFwStartReq: override = 4, address = 0
    [   40.752000] EventGenericEventHandler: CMD Success
    [   40.804000] WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
    [   40.816000] MCU Init Done!
    [   40.824000] efuse_probe: efuse = 10000212
    [   40.832000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
    [   40.840000] RtmpEepromGetDefault::e2p_dafault=1
    [   40.852000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
    [   40.864000] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0]
    [   40.888000] NICReadEEPROMParameters: EEPROM 0x52 b317
    [   40.908000] MtCmdSetTxLpfCal:(ret = 0)
    [   40.916000] MtCmdSetTxIqCal:(ret = 0)
    [   40.920000] MtCmdSetTxDcCal:(ret = 0)
    [   40.928000] MtCmdSetRxFiCal:(ret = 0)
    [   40.936000] MtCmdSetRxFdCal:(ret = 0)
    [   40.944000] MtCmdSetRxFdCal:(ret = 0)
    [   40.952000] MtCmdSetRxFdCal:(ret = 0)
    [   40.960000] MtCmdSetRxFdCal:(ret = 0)
    [   40.964000] MtCmdSetRxFdCal:(ret = 0)
    [   40.972000] MtCmdSetRxFdCal:(ret = 0)
    [   40.980000] MtCmdSetRxFdCal:(ret = 0)
    [   40.988000] MtCmdSetRxFdCal:(ret = 0)
    [   40.996000] MtCmdSetRxFdCal:(ret = 0)
    [   41.004000] NICReadEEPROMParameters: EEPROM 0x52 b317
    [   41.556000] Country Region from e2p = 101
    [   41.564000] mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4
    [   41.576000] mt7615_antenna_default_reset(): DBDC 2G TxPath = 2, 2G RxPath = 2
    [   41.588000] mt7615_antenna_default_reset(): DBDC 5G TxPath = 2, 2G RxPath = 2
    [   41.604000] rtmp_read_txpwr_from_eeprom(233): Don't Support this now!
    [   41.616000] RTMPReadTxPwrPerRate(1381): Don't Support this now!
    [   41.616000] br-lan: port 2(rai0) entered forwarding state
    [   41.640000] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
    [   41.648000] RcRadioInit(): pRadioCtrl=8f72f438,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
    [   41.664000] Band Rf: 1, Phy Mode: 2
    [   41.672000] AntCfgInit(2766): Not support for HIF_MT yet!
    [   41.684000] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
    [   41.696000] MtBfBackOffLoadTable: RF_LOCKDOWN Feature OFF !!!
    [   41.708000] EEPROM Init Done!
    [   41.716000] mt_mac_init()-->
    [   41.720000] mt_mac_pse_init(2750): Don't Support this now!
    [   41.732000] mt7615_init_mac_cr()-->
    [   41.740000] mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
    [   41.748000] MtAsicSetMacMaxLen(1300): Not finish Yet!
    [   41.760000] 
    [   41.916000] ApAutoChannelAtBootUp: AutoChannelBootup = 1, AutoChannelFlag = 1
    [   41.932000] MtCmdSetMacTxRx:(ret = 0)
    [   41.936000] mt7615_apply_dcoc() : reload Central CH [1] BW [0] from cetral freq [2417]  offset [2200] 
    [   41.956000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   41.964000] mt7615_apply_dpd() : reload Central CH [1] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   41.984000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   41.992000] MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0 
    [   42.012000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   42.232000] mt7615_apply_dcoc() : reload Central CH [2] BW [0] from cetral freq [2417]  offset [2200] 
    [   42.248000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   42.256000] mt7615_apply_dpd() : reload Central CH [2] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   42.276000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   42.284000] MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0 
    [   42.304000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   42.524000] mt7615_apply_dcoc() : reload Central CH [3] BW [0] from cetral freq [2417]  offset [2200] 
    [   42.540000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   42.548000] mt7615_apply_dpd() : reload Central CH [3] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   42.568000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   42.576000] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0 
    [   42.596000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   42.892000] mt7615_apply_dcoc() : reload Central CH [4] BW [0] from cetral freq [2432]  offset [2300] 
    [   42.908000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   42.916000] mt7615_apply_dpd() : reload Central CH [4] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   42.936000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   42.944000] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0 
    [   42.964000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   43.340000] mt7615_apply_dcoc() : reload Central CH [5] BW [0] from cetral freq [2432]  offset [2300] 
    [   43.356000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   43.364000] mt7615_apply_dpd() : reload Central CH [5] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   43.384000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   43.392000] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0 
    [   43.412000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   43.632000] mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432]  offset [2300] 
    [   43.648000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   43.656000] mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   43.676000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   43.684000] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0 
    [   43.704000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   43.940000] mt7615_apply_dcoc() : reload Central CH [7] BW [0] from cetral freq [2447]  offset [2400] 
    [   43.956000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   43.964000] mt7615_apply_dpd() : reload Central CH [7] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   43.984000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   43.992000] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0 
    [   44.012000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   44.368000] mt7615_apply_dcoc() : reload Central CH [8] BW [0] from cetral freq [2447]  offset [2400] 
    [   44.384000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   44.392000] mt7615_apply_dpd() : reload Central CH [8] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   44.412000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   44.420000] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0 
    [   44.440000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   44.848000] mt7615_apply_dcoc() : reload Central CH [9] BW [0] from cetral freq [2447]  offset [2400] 
    [   44.864000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   44.872000] mt7615_apply_dpd() : reload Central CH [9] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   44.892000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   44.900000] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0 
    [   44.920000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   45.284000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467]  offset [2500] 
    [   45.300000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   45.308000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   45.328000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   45.336000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0 
    [   45.356000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   45.524000] [WrapDfsRddReportHandle]:  Radar detected !!!!!!!!!!!!!!!!!
    [   45.536000] [WrapDfsRddReportHandle]:  ucRddIdx: 0
    [   45.544000] [WrapDfsRddReportHandle]PrimCh: 40, Band0Ch:40, Band1Ch:0
    [   45.556000]  [WrapDfsRddReportHandle] RD_SILENCE_MODE. Update Uniform Ch=40, Bw=2  
    [   45.576000] MtAsicSetPiggyBack(777): Not support for HIF_MT yet!
    [   45.588000] WifiSysClose(), wdev idx = 0
    [   45.588000] ExtEventBeaconLostHandler::FW LOG, Beacon lost (04:ab:18:52:32:86), Reason 0x10
    [   45.588000]   Beacon lost - AP disabled!!!
    [   45.592000] WifiSysGetBssInfoState(): BssInfoIdx 0 not found!!!
    [   45.592000] WifiSysUpdateBssInfoState(): BssInfoIdx 0 not found!!!
    [   45.624000] mt7615_apply_dcoc() : reload Central CH [11] BW [0] from cetral freq [2467]  offset [2500] 
    [   45.624000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   45.624000] mt7615_apply_dpd() : reload Central CH [11] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   45.624000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   45.624000] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0 
    [   45.624000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   45.756000] ap_ftkd> Release FT KDP Module...
    [   45.764000] MtAsicSetRalinkBurstMode(2605): Not support for HIF_MT yet!
    [   45.776000] MtAsicSetPiggyBack(777): Not support for HIF_MT yet!
    [   45.788000] MtAsicSetTxPreamble(2584): Not support for HIF_MT yet!
    [   45.800000] WifiSysOpen(), wdev idx = 0
    [   45.808000] wdev_attr_update(): wdevId0 = 04:ab:18:52:32:86
    [   45.820000] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
    [   45.832000] [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
    [   45.844000] 
    [   45.844000] [Force Roam] => Force Roam Support = 0
    [   45.856000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=40
    [   45.876000] CountryCode(2.4G/5G)=1/1, RFIC=25, PHY mode(2.4G/5G)=49/49, support 19 channels
    [   45.884000] ====================================================================
    [   45.884000] Channel   1 : Busy Time =   4205, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   2 : Busy Time =   3829, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   3 : Busy Time =   5569, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   4 : Busy Time =   6484, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   5 : Busy Time =   3384, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   6 : Busy Time =   4586, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   7 : Busy Time =   8446, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   8 : Busy Time =   2281, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel   9 : Busy Time =   5482, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel  10 : Busy Time =   1719, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] Channel  11 : Busy Time =   9830, Skip Channel = FALSE, BwCap = TRUE
    [   45.884000] ====================================================================
    [   45.884000] Rule 3 Channel Busy time value : Select Primary Channel 10 
    [   45.884000] Rule 3 Channel Busy time value : Min Channel Busy = 1719
    [   45.884000] Rule 3 Channel Busy time value : BW = 20
    [   45.884000]  AutoChSelUpdateChannel(): Update channel for wdev0 for this band PhyMode = 14,Channel = 10  
    [   45.884000] ApAutoChannelAtBootUp Force Roam Support = 0
    [   45.884000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=10
    [   45.884000] CountryCode(2.4G/5G)=1/1, RFIC=25, PHY mode(2.4G/5G)=14/14, support 13 channels
    [   45.884000] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
    [   45.888000] MtCmdSetMacTxRx:(ret = 0)
    [   45.888000] mt7615_apply_dcoc() : reload Central CH [3] BW [0] from cetral freq [2417]  offset [2200] 
    [   45.888000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   45.888000] mt7615_apply_dpd() : reload Central CH [3] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   45.888000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   45.888000] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0 
    [   45.888000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   45.900000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   46.264000] mt7615_apply_dcoc() : reload Central CH [4] BW [0] from cetral freq [2432]  offset [2300] 
    [   46.264000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   46.264000] mt7615_apply_dpd() : reload Central CH [4] BW [0] from cetral freq [2422] i[44] offset [4b20] 
    [   46.264000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   46.264000] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0 
    [   46.264000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   46.272000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   46.460000] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
    [   46.472000] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
    [   46.472000]  LinkToOmacIdx = 0, LinkToWdevType = 1
    [   46.504000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO),                 CmdBssInfoBmcRate.u2BcTransmit= 8192,                 CmdBssInfoBmcRate.u2McTransmit = 8196
    [   46.608000] mt7615_apply_dcoc() : reload Central CH [5] BW [0] from cetral freq [2432]  offset [2300] 
    [   46.624000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   46.632000] mt7615_apply_dpd() : reload Central CH [5] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   46.652000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   46.652000]  [RadarStateCheck]Set into RD_NORMAL_MODE  
    [   46.652000] MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0
    [   46.652000] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0
    [   46.652000] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0
    [   46.652000] mt7615_bbp_adjust():rf_bw=2, ext_ch=3, PrimCh=40, HT-CentCh=38, VHT-CentCh=42
    [   46.652000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210]  offset [1900] 
    [   46.744000] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0 
    [   46.764000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   46.764000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   46.772000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   46.792000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98] 
    [   46.808000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   46.820000] MtCmdChannelSwitch: control_chl = 40,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0 
    [   46.836000] BW = 2,TXStream = 4, RXStream = 4, scan(0)
    [   46.864000] ap_phy_rrm_init_byRf(): AP Set CentralFreq at 42(Prim=40, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
    [   46.900000] [WrapDfsRadarDetectStart]: Band0Ch is 40
    [   46.908000] [WrapDfsRadarDetectStart]: Band1Ch is 0
    [   46.920000] LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
    [   46.932000] ap_ftkd> Initialize FT KDP Module...
    [   46.940000] Main bssid = 04:ab:18:52:32:86
    [   46.948000] MtCmdSetDfsTxStart:(ret = 0)
    [   47.348000] mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432]  offset [2300] 
    [   47.364000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   47.372000] mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   47.392000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   47.400000] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0 
    [   47.420000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   47.440000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   47.476000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
    [   47.908000] mt7615_apply_dcoc() : reload Central CH [7] BW [0] from cetral freq [2447]  offset [2400] 
    [   47.924000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   47.932000] mt7615_apply_dpd() : reload Central CH [7] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   47.952000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   47.960000] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0 
    [   47.980000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   48.000000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   48.308000] mt7615_apply_dcoc() : reload Central CH [8] BW [0] from cetral freq [2447]  offset [2400] 
    [   48.324000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   48.332000] mt7615_apply_dpd() : reload Central CH [8] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   48.352000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   48.360000] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0 
    [   48.380000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   48.400000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   48.768000] mt7615_apply_dcoc() : reload Central CH [9] BW [0] from cetral freq [2447]  offset [2400] 
    [   48.784000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   48.792000] mt7615_apply_dpd() : reload Central CH [9] BW [0] from cetral freq [2442] i[45] offset [4bf8] 
    [   48.812000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   48.820000] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0 
    [   48.840000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   48.860000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   49.180000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467]  offset [2500] 
    [   49.196000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   49.204000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   49.224000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   49.232000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0 
    [   49.252000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   49.272000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   49.580000] mt7615_apply_dcoc() : reload Central CH [11] BW [0] from cetral freq [2467]  offset [2500] 
    [   49.596000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   49.604000] mt7615_apply_dpd() : reload Central CH [11] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   49.624000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   49.632000] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0 
    [   49.652000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   49.672000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   50.008000] mt7615_apply_dcoc() : reload Central CH [12] BW [0] from cetral freq [2467]  offset [2500] 
    [   50.024000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   50.032000] mt7615_apply_dpd() : reload Central CH [12] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   50.052000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   50.060000] MtCmdChannelSwitch: control_chl = 12,control_ch2=0, central_chl = 12 DBDCIdx= 0, Band= 0 
    [   50.080000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   50.100000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   50.408000] mt7615_apply_dcoc() : reload Central CH [13] BW [0] from cetral freq [2467]  offset [2500] 
    [   50.424000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   50.432000] mt7615_apply_dpd() : reload Central CH [13] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   50.452000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   50.460000] MtCmdChannelSwitch: control_chl = 13,control_ch2=0, central_chl = 13 DBDCIdx= 0, Band= 0 
    [   50.480000] BW = 0,TXStream = 4, RXStream = 4, scan(1)
    [   50.500000] AP OBSS SYNC - BBP R4 to 20MHz.l
    [   50.868000] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
    [   50.868000]  LinkToOmacIdx = 0, LinkToWdevType = 1
    [   50.896000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO),                 CmdBssInfoBmcRate.u2BcTransmit= 0,                 CmdBssInfoBmcRate.u2McTransmit = 0
    [   51.028000]  [RadarStateCheck]Set into RD_NORMAL_MODE  
    [   51.040000] MtCmdTxPowerSKUCtrl: fgTxPowerSKUEn: 1, BandIdx: 0
    [   51.052000] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0
    [   51.064000] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0
    [   51.076000] mt7615_bbp_adjust():rf_bw=0, ext_ch=0, PrimCh=10, HT-CentCh=10, VHT-CentCh=0
    [   51.092000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467]  offset [2500] 
    [   51.112000] MtCmdGetRXDCOCCalResult:(ret = 0)
    [   51.120000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0] 
    [   51.140000] MtCmdGetTXDPDCalResult:(ret = 0)
    [   51.148000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0 
    [   51.168000] BW = 0,TXStream = 4, RXStream = 4, scan(0)
    [   51.200000] ap_phy_rrm_init_byRf(): AP Set CentralFreq at 10(Prim=10, HT-CentCh=10, VHT-CentCh=0, BBP_BW=0)
    [   51.232000] LeadTimeForBcn, OmacIdx = 0, WDEV_WITH_BCN_ABILITY
    [   51.244000] MtAsicSetRalinkBurstMode(2605): Not support for HIF_MT yet!
    [   51.256000] MtAsicSetPiggyBack(777): Not support for HIF_MT yet!
    [   51.268000] MtAsicSetTxPreamble(2584): Not support for HIF_MT yet!
    [   51.284000] ap_ftkd> Initialize FT KDP Module...
    [   51.292000] Main bssid = 04:ab:18:52:32:85
    [   51.300000] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
    [   51.308000] MtCmdSetMacTxRx:(ret = 0)
    [   51.316000] MCS Set = ff ff ff ff 01
    [   51.324000]  cap_vht_bw: 0, correct to cap_vht_bw
    [   51.384000] The new WDS interface MAC = FF:FF:FF:FF:FF:FF
    [   51.392000]   MacTabMatchWCID = 0
    [   51.400000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   51.416000] The new WDS interface MAC = FF:FF:FF:FF:FF:FF
    [   51.428000]   MacTabMatchWCID = 0
    [   51.436000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   51.452000] The new WDS interface MAC = FF:FF:FF:FF:FF:FF
    [   51.464000]   MacTabMatchWCID = 0
    [   51.472000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   51.488000] Total allocated 4 WDS interfaces!
    [   51.500000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   51.516000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   51.536000] WtcSetMaxStaNum: MaxStaNum:103, BssidNum:1, WdsNum:4, ApcliNum:2, MaxNumChipRept:16, MinMcastWcid:125
    [   51.600000] red_is_enabled: set CR4/N9 RED Enable to 1.
    [   51.612000] cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
    [   51.624000] Correct apidx from 0 to 0 for WscUUIDInit
    [   51.632000] Generate UUID for apidx(0)
    [   51.640000] PpeDevRegHandler : ineterface ra0 register (1)
    [   51.716000] device ra0 entered promiscuous mode
    [   51.724000] br-lan: port 3(ra0) entered forwarding state
    [   51.736000] br-lan: port 3(ra0) entered forwarding state
    [   53.740000] br-lan: port 3(ra0) entered forwarding state
    [   54.084000] PpeDevRegHandler : ineterface apcli0 register (2)
    [   54.096000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
    [   54.112000] WifiSysOpen(), wdev idx = 5
    [   54.120000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=10
    [   54.140000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:14,Channel=10
    [   54.156000] CountryCode(2.4G/5G)=1/1, RFIC=25, PHY mode(2.4G/5G)=14/14, support 13 channels
    [   54.176000] PpeDevRegHandler : ineterface apclii0 register (3)
    [   54.188000] WifiSysOpen(), wdev idx = 5
    [   54.196000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=40
    [   54.216000] HcUpdatePhyMode(): Update PhyMode for all wdev for this band PhyMode:49,Channel=40
    [   54.232000] CountryCode(2.4G/5G)=1/1, RFIC=25, PHY mode(2.4G/5G)=49/49, support 19 channels
    [   54.524000] 
    [   54.524000]  Set_Led_Proc ==> arg = 00-00-00-00-02-00-00-00
    [   54.540000] 
    [   54.540000] Set_Led_Proc
    [   54.548000] 00
    [   54.548000] 00
    [   54.552000] 00
    [   54.556000] 00
    [   54.560000] 02
    [   54.564000] 00
    [   54.568000] 00
    [   54.568000] 00
    [   54.572000] AndesLedEnhanceOP: Success!
    [   54.624000] 
    [   54.624000]  Set_Led_Proc ==> arg = 00-00-00-00-02-00-00-00
    [   54.636000] 
    [   54.636000] Set_Led_Proc
    [   54.644000] 00
    [   54.648000] 00
    [   54.652000] 00
    [   54.656000] 00
    [   54.660000] 02
    [   54.660000] 00
    [   54.664000] 00
    [   54.668000] 00
    [   54.672000] AndesLedEnhanceOP: Success!
    [   54.916000] BndStrg_Init()
    BndStrg_SetInfFlags(): BSS(04:AB:18:52:32:85) set 2G Inf ra0 ready.
    BndStrg Enable Success
    
    [   54.948000] BndStrg_Init()
    [   54.948000] BndStrg_SetInfFlags(): BSS(04:AB:18:52:32:86) set 5G Inf rai0 ready.
    BndStrg Enable Success
    
    [   57.068000] BndStrg_InfStatusRsp:INF [ra0]STATUS QUERY ON
    [   57.080000] 
    [   57.080000] BndStrg_InfStatusRsp:INF [rai0]STATUS QUERY ON
    start ddns
    
    add_cron
    add_cron data
    [   59.112000] Send DISASSOC frame(3) with ra0
    [   59.120000] Send DISASSOC frame(3) with ra0
    FC start
    FC Disable