タグ: GL.iNet

GL-AR750S

偶然某氏より頂いたもの。ath79へサポートを追加するため、調べていく。GL・iNetのリポジトリではar71xxベースのコードが既に存在するため、難易度はそんなに高くは無いかな?というところ。
→ 大嘘。現状OpenWrtにはSPI-NANDドライバが無く、rootfsがubiで格納されているspi-nandチップを検出できない。ドライバをSPI-NANDサポート後のKernelからbackportする必要がある。
頂いてばかりでほんとに申し訳ないところ。何かそのうち返せるものがあれば。。

Switch

zone WAN LAN
port
(GL-AR750S)
WAN LAN2 LAN1
port
(AR8337)
port1 port2 port3

MAC

  • LAN: E4:95:6E:xx:xx:2E (art, 0x0 (hex))
  • WAN: E4:95:6E:xx:xx:2E (同上)
  • 2.4G: E4:95:6E:xx:xx:2E (art, 0x1002 (hex))
  • 5G: E4:95:6E:xx:xx:2F (LAN + 1)

Kernel

stock firmwareの裏側はほぼ素のOpenWrtのため、こちらから調べた。

  • uname -a
    root@GL-AR750S:~# uname -a
    Linux GL-AR750S 4.9.109 #0 Fri Jun 22 10:22:57 2018 mips GNU/Linux
    

  • cat /proc/version
    root@GL-AR750S:~# cat /proc/version
    Linux version 4.9.109 (***@***-*****-***) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6910-323285a) ) #0 Fri Jun 22 10:22:57 2018
    

  • cat /proc/cpuinfo
    root@GL-AR750S:~# cat /proc/cpuinfo
    system type             : Qualcomm Atheros QCA956X ver 1 rev 0
    machine                 : GL-AR750S
    processor               : 0
    cpu model               : MIPS 74Kc V5.0
    BogoMIPS                : 385.84
    wait instruction        : yes
    microsecond timers      : yes
    tlb_entries             : 32
    extra interrupt vector  : yes
    hardware watchpoint     : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
    isa                     : mips1 mips2 mips32r1 mips32r2
    ASEs implemented        : mips16 dsp dsp2
    shadow register sets    : 1
    kscratch registers      : 0
    package                 : 0
    core                    : 0
    VCED exceptions         : not available
    VCEI exceptions         : not available
    

  • cat /proc/meminfo
    root@GL-AR750S:~# cat /proc/meminfo
    MemTotal:         124608 kB
    MemFree:           73624 kB
    MemAvailable:      64112 kB
    Buffers:            7864 kB
    Cached:            19772 kB
    SwapCached:            0 kB
    Active:            19932 kB
    Inactive:          11192 kB
    Active(anon):       4152 kB
    Inactive(anon):      156 kB
    Active(file):      15780 kB
    Inactive(file):    11036 kB
    Unevictable:           0 kB
    Mlocked:               0 kB
    SwapTotal:             0 kB
    SwapFree:              0 kB
    Dirty:                 0 kB
    Writeback:             0 kB
    AnonPages:          3500 kB
    Mapped:             4228 kB
    Shmem:               820 kB
    Slab:               9372 kB
    SReclaimable:       3312 kB
    SUnreclaim:         6060 kB
    KernelStack:         704 kB
    PageTables:          504 kB
    NFS_Unstable:          0 kB
    Bounce:                0 kB
    WritebackTmp:          0 kB
    CommitLimit:       62304 kB
    Committed_AS:      10872 kB
    VmallocTotal:    1048372 kB
    VmallocUsed:           0 kB
    VmallocChunk:          0 kB
    

  • cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 00040000 00010000 "u-boot"
    mtd1: 00010000 00010000 "u-boot-env"
    mtd2: 00010000 00010000 "art"
    mtd3: 00200000 00010000 "kernel"
    mtd4: 00cbf000 00010000 "reserved"
    mtd5: 08000000 00020000 "ubi"
    

  • dmesg
    無線は起動後に急いで切った。

    root@GL-AR750S:~# dmesg
    [    0.000000] Linux version 4.9.109 (luo@luo-B250M-D3H) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6910-323285a) ) #0 Fri Jun 22 10:22:57 2018
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
    [    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 08000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
    [    0.000000] On node 0 totalpages: 32768
    [    0.000000] free_area_init_node: node 0, pgdat 804ee8a4, node_mem_map 81000020
    [    0.000000]   Normal zone: 256 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
    [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [    0.000000] pcpu-alloc: [0] 0
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
    [    0.000000] Kernel command line:  board=GL-AR750S console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,2048k(kernel),13052k(reserved);spi0.1:-(ubi) rootfstype=squashfs noinitrd
    [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
    [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Writing ErrCtl register=00000000
    [    0.000000] Readback ErrCtl register=00000000
    [    0.000000] Memory: 124420K/131072K available (3652K kernel code, 159K rwdata, 856K rodata, 188K init, 217K bss, 6652K reserved, 0K cma-reserved)
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:51
    [    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
    [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
    [    0.000007] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
    [    0.008223] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
    [    0.071033] pid_max: default: 32768 minimum: 301
    [    0.075985] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.082956] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.092574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
    [    0.102978] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.110405] NET: Registered protocol family 16
    [    0.116383] MIPS: machine is GL-AR750S
    [    0.359895] registering PCI controller with io_map_base unset
    [    0.378262] i2c-gpio i2c-gpio.0: using pins 5 (SDA) and 21 (SCL)
    [    0.384805] PCI host bridge to bus 0000:00
    [    0.389162] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
    [    0.396403] pci_bus 0000:00: root bus resource [io  0x0001]
    [    0.402278] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
    [    0.409425] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [    0.417803] pci 0000:00:00.0: [168c:0050] type 00 class 0x028000
    [    0.417812] pci 0000:00:00.0: invalid calibration data
    [    0.423243] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
    [    0.423290] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
    [    0.423355] pci 0000:00:00.0: supports D1
    [    0.423363] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
    [    0.423549] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
    [    0.423572] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
    [    0.431318] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
    [    0.438935] pci 0000:00:00.0: using irq 40 for pin 1
    [    0.446715] clocksource: Switched to clocksource MIPS
    [    0.452953] NET: Registered protocol family 2
    [    0.458376] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.465733] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.472476] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.479264] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.485430] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.492293] NET: Registered protocol family 1
    [    0.496950] PCI: CLS 0 bytes, default 32
    [    0.499203] Crashlog allocated RAM at address 0x3f00000
    [    0.505502] workingset: timestamp_bits=30 max_order=15 bucket_order=0
    [    0.518286] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.524428] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.542359] io scheduler noop registered
    [    0.546493] io scheduler deadline registered (default)
    [    0.552320] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
    [    0.561227] console [ttyS0] disabled
    [    0.585062] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
    [    0.594159] console [ttyS0] enabled
    [    0.601708] bootconsole [early0] disabled
    [    0.615008] m25p80 spi0.0: found w25q128, expected m25p80
    [    0.629708] m25p80 spi0.0: w25q128 (16384 Kbytes)
    [    0.634589] 5 cmdlinepart partitions found on MTD device spi0.0
    [    0.640712] Creating 5 MTD partitions on "spi0.0":
    [    0.645665] 0x000000000000-0x000000040000 : "u-boot"
    [    0.652005] 0x000000040000-0x000000050000 : "u-boot-env"
    [    0.658861] 0x000000050000-0x000000060000 : "art"
    [    0.665016] 0x000000060000-0x000000260000 : "kernel"
    [    0.671500] 0x000000260000-0x000000f1f000 : "reserved"
    [    0.678665] spi-nand: Giga SPI NAND was found.
    [    0.683266] spi-nand: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
    [    0.691489] 1 cmdlinepart partitions found on MTD device spi0.1
    [    0.697640] Creating 1 MTD partitions on "spi0.1":
    [    0.702589] 0x000000000000-0x000008000000 : "ubi"
    [    1.156400] found bad block 7fe0000
    [    1.160604] libphy: Fixed MDIO Bus: probed
    [    1.173776] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0
    [    1.902060] libphy: ag71xx_mdio: probed
    [    2.528162] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
    [    2.539704] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:SGMII
    [    2.547589] NET: Registered protocol family 10
    [    2.555277] NET: Registered protocol family 17
    [    2.559973] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
    [    2.573446] 8021q: 802.1Q VLAN Support v1.8
    [    2.582811] UBI: auto-attach mtd5
    [    2.586262] ubi0: attaching mtd5
    [    2.596728] random: fast init done
    [    7.262423] ubi0: scanning is finished
    [    7.317575] ubi0: attached mtd5 (name "ubi", size 128 MiB)
    [    7.323244] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [    7.330378] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [    7.337390] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    [    7.344575] ubi0: good PEBs: 1023, bad PEBs: 1, corrupted PEBs: 0
    [    7.350873] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
    [    7.358339] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 344389367
    [    7.367683] ubi0: available PEBs: 0, total reserved PEBs: 1023, PEBs reserved for bad PEB handling: 19
    [    7.377365] ubi0: background thread "ubi_bgt0d" started, PID 320
    [    7.387009] block ubiblock0_0: created from ubi0:0(rootfs)
    [    7.392684] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
    [    7.399896] hctosys: unable to open rtc device (rtc0)
    [    7.426055] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
    [    7.434489] Freeing unused kernel memory: 188K
    [    7.439101] This architecture does not have kernel memory protection.
    [    8.326158] init: Console is alive
    [    8.329962] init: - watchdog -
    [   11.259095] kmodloader: loading kernel modules from /etc/modules-boot.d/*
    [   11.424459] usbcore: registered new interface driver usbfs
    [   11.430247] usbcore: registered new interface driver hub
    [   11.435804] usbcore: registered new device driver usb
    [   11.446145] exFAT: Version 1.2.9
    [   11.479059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [   11.494259] SCSI subsystem initialized
    [   11.502408] ehci-platform: EHCI generic platform driver
    [   11.507931] ehci-platform ehci-platform.0: EHCI Host Controller
    [   11.514074] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
    [   11.524523] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
    [   11.556751] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
    [   11.564101] hub 1-0:1.0: USB hub found
    [   11.568276] hub 1-0:1.0: 1 port detected
    [   11.572633] ehci-platform ehci-platform.1: EHCI Host Controller
    [   11.578814] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
    [   11.589290] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
    [   11.616735] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
    [   11.624059] hub 2-0:1.0: USB hub found
    [   11.628269] hub 2-0:1.0: 1 port detected
    [   11.634894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [   11.642664] ohci-platform: OHCI generic platform driver
    [   11.650271] uhci_hcd: USB Universal Host Controller Interface driver
    [   11.660623] usbcore: registered new interface driver usb-storage
    [   11.667487] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
    [   11.677595] init: - preinit -
    [   12.278192] usb 2-1: new high-speed USB device number 2 using ehci-platform
    [   12.589604] hub 2-1:1.0: USB hub found
    [   12.609157] hub 2-1:1.0: 4 ports detected
    [   12.945148] random: procd: uninitialized urandom read (4 bytes read)
    [   13.048272] usb 2-1.1: new high-speed USB device number 3 using ehci-platform
    [   13.274144] usb-storage 2-1.1:1.0: USB Mass Storage device detected
    [   13.287920] scsi host0: usb-storage 2-1.1:1.0
    [   13.359842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   14.358430] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0233 PQ: 0 ANSI: 0
    [   14.371362] sd 0:0:0:0: [sda] Attached SCSI removable disk
    [   14.438395] eth0: link up (1000Mbps/Full duplex)
    [   14.443377] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   16.627648] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 442
    [   16.920834] UBIFS (ubi0:1): recovery needed
    [   17.550131] UBIFS (ubi0:1): recovery completed
    [   17.554805] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
    [   17.562924] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [   17.573176] UBIFS (ubi0:1): FS size: 116183040 bytes (110 MiB, 915 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
    [   17.584137] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
    [   17.590977] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID EB673D7C-E244-4A1A-96AA-6589ADE8527C, small LPT model
    [   17.636116] mount_root: switching to ubifs overlay
    [   17.720883] urandom-seed: Seeding with /etc/urandom.seed
    [   17.908872] eth0: link down
    [   17.922029] procd: - early -
    [   17.925092] procd: - watchdog -
    [   18.521942] random: jshn: uninitialized urandom read (4 bytes read)
    [   18.588667] procd: - watchdog -
    [   18.592132] procd: - ubus -
    [   18.796256] random: ubusd: uninitialized urandom read (4 bytes read)
    [   18.884659] random: ubusd: uninitialized urandom read (4 bytes read)
    [   18.898509] procd: - init -
    [   20.931307] kmodloader: loading kernel modules from /etc/modules.d/*
    [   20.978385] ntfs: driver 2.1.32 [Flags: R/O MODULE].
    [   21.010241] tun: Universal TUN/TAP device driver, 1.6
    [   21.015465] tun: (C) 1999-2004 Max Krasnyansky 
    [   21.049229] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   21.080802] Netfilter messages via NETLINK v0.30.
    [   21.094517] ip_set: protocol 6
    [   21.163178] fuse init (API version 7.26)
    [   21.198780] usbcore: registered new interface driver cdc_acm
    [   21.204629] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [   21.228049] usbcore: registered new interface driver cdc_wdm
    [   21.240382] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
    [   21.248704] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
    [   21.277750] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   21.297566] usbcore: registered new interface driver ipheth
    [   21.327962] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
    [   21.621487] usbcore: registered new interface driver usbserial
    [   21.627650] usbcore: registered new interface driver usbserial_generic
    [   21.634478] usbserial: USB Serial support registered for generic
    [   21.673466] wireguard: WireGuard 0.0.20180620 loaded. See www.wireguard.com for information.
    [   21.682234] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld . All Rights Reserved.
    [   21.778571] xt_time: kernel timezone is -0000
    [   21.790543] usbcore: registered new interface driver cdc_ether
    [   21.819567] usbcore: registered new interface driver cdc_ncm
    [   22.008228] usbcore: registered new interface driver cp210x
    [   22.014059] usbserial: USB Serial support registered for cp210x
    [   22.038053] usbcore: registered new interface driver huawei_cdc_ncm
    [   22.150154] PPP generic driver version 2.4.2
    [   22.165506] PPP MPPE Compression module registered
    [   22.175685] NET: Registered protocol family 24
    [   22.189316] usbcore: registered new interface driver qmi_wwan
    [   22.219423] usbcore: registered new interface driver rndis_host
    [   22.256774] usbcore: registered new interface driver sierra
    [   22.262642] usbserial: USB Serial support registered for Sierra USB modem
    [   22.290952] usbcore: registered new interface driver sierra_net
    [   22.367606] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
    [   22.375703] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
    [   22.691315] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
    [   22.702403] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   30.939926] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
    [   30.958008] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/firmware-6.bin failed with error -2
    [   30.969087] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   32.708941] firmware ath10k!QCA9887!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
    [   33.077190] ath10k_pci 0000:00:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
    [   33.086749] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
    [   33.099533] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,ignore-otp,skip-clock-init,mfp,allows-mesh-bcast crc32 c232a0c3
    [   33.268684] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9887/hw1.0/board-2.bin failed with error -2
    [   33.279511] ath10k_pci 0000:00:00.0: Falling back to user helper
    [   33.466320] firmware ath10k!QCA9887!hw1.0!board-2.bin: firmware_loading_store: map pages failed
    [   33.486568] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 546cca0d
    [   34.786047] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
    [   34.928130] ath: EEPROM regdomain: 0x0
    [   34.928137] ath: EEPROM indicates default country code should be used
    [   34.928140] ath: doing EEPROM country->regdmn map search
    [   34.928151] ath: country maps to regdmn code: 0x3a
    [   34.928155] ath: Country alpha2 being used: US
    [   34.928158] ath: Regpair used: 0x3a
    [   35.007841] usbcore: registered new interface driver option
    [   35.013674] usbserial: USB Serial support registered for GSM modem (1-port)
    [   35.076414] usbcore: registered new interface driver rt2800usb
    [   35.110543] ath: EEPROM regdomain: 0x0
    [   35.110551] ath: EEPROM indicates default country code should be used
    [   35.110554] ath: doing EEPROM country->regdmn map search
    [   35.110566] ath: country maps to regdmn code: 0x3a
    [   35.110570] ath: Country alpha2 being used: US
    [   35.110573] ath: Regpair used: 0x3a
    [   35.120548] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
    [   35.124152] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=47
    [   35.187783] kmodloader: done loading kernel modules from /etc/modules.d/*
    [   45.361749] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   45.381062] br-lan: port 1(eth0.1) entered blocking state
    [   45.386651] br-lan: port 1(eth0.1) entered disabled state
    [   45.392607] device eth0.1 entered promiscuous mode
    [   45.397595] device eth0 entered promiscuous mode
    [   45.430229] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
    [   45.473702] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
    [   46.715529] eth0: link up (1000Mbps/Full duplex)
    [   46.723175] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   46.804760] br-lan: port 1(eth0.1) entered blocking state
    [   46.810384] br-lan: port 1(eth0.1) entered forwarding state
    [   46.816287] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
    [   46.968826] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
    [   48.377861] fast-classifier: starting up
    [   48.382072] fast-classifier: registered
    [   55.894385] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   55.915610] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [   55.929752] br-lan: port 2(wlan0) entered blocking state
    [   55.935250] br-lan: port 2(wlan0) entered disabled state
    [   55.941137] device wlan0 entered promiscuous mode
    [   55.962806] br-lan: port 3(wlan1) entered blocking state
    [   55.968347] br-lan: port 3(wlan1) entered disabled state
    [   55.974187] device wlan1 entered promiscuous mode
    [   57.216107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
    [   57.222873] br-lan: port 3(wlan1) entered blocking state
    [   57.228390] br-lan: port 3(wlan1) entered forwarding state
    [   57.778998] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   57.785725] br-lan: port 2(wlan0) entered blocking state
    [   57.791280] br-lan: port 2(wlan0) entered forwarding state
    [   78.289279] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
    [   79.816751] random: crng init done
    [   79.820277] random: 6 urandom warning(s) missed due to ratelimiting
    [  130.272445] device wlan0 left promiscuous mode
    [  130.277219] br-lan: port 2(wlan0) entered disabled state
    [  132.255789] device wlan1 left promiscuous mode
    [  132.260560] br-lan: port 3(wlan1) entered disabled state
    [ 2733.302008] ath: EEPROM regdomain: 0x8188
    [ 2733.302016] ath: EEPROM indicates we should expect a country code
    [ 2733.302020] ath: doing EEPROM country->regdmn map search
    [ 2733.302024] ath: country maps to regdmn code: 0x40
    [ 2733.302029] ath: Country alpha2 being used: JP
    [ 2733.302033] ath: Regpair used: 0x40
    [ 2733.302037] ath: regdomain 0x8188 dynamically updated by user
    [ 2733.306445] ath: EEPROM regdomain: 0x8188
    [ 2733.306448] ath: EEPROM indicates we should expect a country code
    [ 2733.306451] ath: doing EEPROM country->regdmn map search
    [ 2733.306455] ath: country maps to regdmn code: 0x40
    [ 2733.306458] ath: Country alpha2 being used: JP
    [ 2733.306461] ath: Regpair used: 0x40
    [ 2733.306464] ath: regdomain 0x8188 dynamically updated by user
    [ 2757.549210] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2757.559092] br-lan: port 2(wlan0) entered blocking state
    [ 2757.564584] br-lan: port 2(wlan0) entered disabled state
    [ 2822.121600] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [ 2822.161342] br-lan: port 2(wlan1) entered blocking state
    [ 2822.166923] br-lan: port 2(wlan1) entered disabled state
    

広告