タグ: WXR-2533DHP

WXR-2533DHP

某氏からWHR-300HP2に続きWXR-2533DHPまで頂いたので、早速同様にハード/ソフト周りのあれこれをメモ

MAC

  • LAN: 74:03:BD:xx:xx:98 (art, 0x0 (hex))
  • WAN: 74:03:BD:xx:xx:99 (art, 0x6 (hex))
  • 2.4G: 74:03:BD:xx:xx:9A (art, 0x18 (hex))
  • 5G: 74:03:BD:xx:xx:9B (art, 0x1E (hex))

U-Boot

  • help
    (IPQ) # help
    ?       - alias for 'help'
    all_led_off- All LED Off
    all_led_on- All LED On
    base    - print or set address offset
    bootipq - bootipq from flash device
    bootm   - boot application image from memory
    bootmbn - bootmbn from flash device
    bootp   - boot image via network using BOOTP/TFTP protocol
    bootz   - boot Linux zImage image from memory
    button_status- Show all switch and button status
    chpart  - change active partition
    cmp     - memory compare
    cp      - memory copy
    crc32   - checksum calculation
    dhcp    - boot image via network using DHCP/TFTP protocol
    download- Download Image or Uboot to flash
    dumpipq_data- dumpipq_data crashdump collection from memory
    echo    - echo args to console
    env     - environment handling commands
    exit    - exit script
    false   - do nothing, unsuccessfully
    fdt     - flattened device tree utility commands
    getfirmware- Get Firmware from Tftp server and write to flash. [option]:single or dual
    go      - start application at address 'addr'
    help    - print command description/usage
    hwclear - Clear hardware variables
    hwcommit- Save hardware variables to persistent storage
    hwget   - Hardware variables get
    hwset   - Hardware variables set
    i2c     - I2C sub-system
    iminfo  - print header information for application image
    imxtract- extract a part of a multi-image
    ipq_nand- Switch between SBL and Linux kernel page layout.
    loop    - infinite loop on address range
    md      - memory display
    mii     - MII utility commands
    mm      - memory modify (auto-incrementing address)
    mmc     - MMC sub system
    mmcinfo - display MMC info
    mphyrd  - qca8511 packet processor PHY register display
    mphyrw  - qca8511 packet processor PHY register write (fill)
    mprd    - qca8511 packet processor register display
    mprw    - qca8511 packet processor register write (fill)
    mtdparts- define flash/nand partitions
    mtest   - simple RAM read/write test
    mw      - memory write (fill)
    nand    - NAND sub-system
    nboot   - boot from NAND device
    nm      - memory modify (constant address)
    ping    - send ICMP ECHO_REQUEST to network host
    printenv- print environment variables
    reset   - Perform RESET of the CPU
    run     - run commands in an environment variable
    saveenv - save environment variables to persistent storage
    setenv  - set environment variables
    sf      - SPI flash sub-system
    showvar - print local hushshell variables
    smeminfo- print SMEM FLASH information
    source  - run script from memory
    test    - minimal test like /bin/sh
    tftpboot- boot image via network using TFTP protocol
    tftpput - TFTP put command, for uploading files to a server
    tftpsrv - act as a TFTP server and boot the first received file
    true    - do nothing, successfully
    ubi     - ubi commands
    usb     - USB sub-system
    usbboot - boot from USB device
    version - print monitor, compiler and linker version
    

  • version
    (IPQ) # version
    
    BUFFALO WXR-2533DHP U-Boot Ver 1.14 (May 18 2015 - 13:24:36)
    arm-openwrt-linux-uclibcgnueabi-gcc (Linaro GCC 4.6-2012.02) 4.6.3 20120201 (prerelease)
    GNU ld (GNU Binutils) 2.22
    

  • printenv
    (IPQ) # printenv
    baudrate=115200
    bootargs=console=ttyHSL1,115200n8
    bootcmd=bootipq
    bootdelay=2
    ethact=eth1
    inspection_env=set bootargs console=ttyHSL1,115200n8 earlyprintk=ocd,keep ignore_loglevel rootfstype=ramfs 
    ipaddr=192.168.11.1 
    machid=1260
    ramboot=set bootargs console=ttyHSL1,115200n8 earlyprintk=ocd,keep ignore_loglevel rootfstype=ramfs; tftpboot 0x44000000 wxr2300dhp-initramfs.uImage;bootm 0x44000000
    resetnorenv=sf probe;sf erase 0x170000 +0x10000 
    serverip=192.168.11.10 
    stderr=serial
    stdin=serial
    stdout=serial
    unand=tftpboot 0x43000000 nand-ipq806x-single.img;imgaddr=0x43000000 && source $imgaddr:script
    unandapp=tftpboot 0x43000000 ipq806x-nand-apps.img;imgaddr=0x43000000 && source $imgaddr:script
    unona=tftpboot 0x42000000 nornand-ipq806x-single.img;sf probe;imgaddr=0x42000000 && source $imgaddr:script
    unonaapp=tftpboot 0x42000000 ipq806x-nornand-apps.img;sf probe;imgaddr=0x42000000 && source $imgaddr:script
    unor=tftpboot 0x42000000 nor-ipq806x-single.img;sf probe;imgaddr=0x42000000 && source $imgaddr:script
    unorapp=tftpboot 0x42000000 ipq806x-nor-apps.img;sf probe;imgaddr=0x42000000 && source $imgaddr:script
    
    Environment size: 1163/65532 bytes
    

Kernel

  • uname -a
    root@AP7403BDBC1D98:/# uname -a
    Linux AP7403BDBC1D98 3.4.103 #1 SMP PREEMPT Wed Jun 21 15:01:38 CST 2017 armv7l GNU/Linux
    

  • cat /proc/version
    root@AP7403BDBC1D98:/# cat /proc/version
    Linux version 3.4.103 ((name)@TWTEB2S1F204) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Wed Jun 21 15:01:38 CST 2017
    

  • cat /proc/mtd
    root@AP7403BDBC1D98:/# cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 04000000 00020000 "rootfs"
    mtd1: 04000000 00020000 "rootfs_1"
    mtd2: 00010000 00010000 "SBL1"
    mtd3: 00020000 00010000 "MIBIB"
    mtd4: 00030000 00010000 "SBL2"
    mtd5: 00030000 00010000 "SBL3"
    mtd6: 00010000 00010000 "DDRCONFIG"
    mtd7: 00010000 00010000 "SSD"
    mtd8: 00030000 00010000 "TZ"
    mtd9: 00020000 00010000 "RPM"
    mtd10: 00070000 00010000 "APPSBL"
    mtd11: 00010000 00010000 "APPSBLENV"
    mtd12: 00040000 00010000 "ART"
    mtd13: 00010000 00010000 "BOOTCONFIG"
    mtd14: 00070000 00010000 "APPSBL_1"
    mtd15: 00516000 0001f000 "kernel"
    mtd16: 01e08000 0001f000 "ubi_rootfs"
    mtd17: 00516000 0001f000 "ubi_rootfs_data"
    

  • ls -1 /sys/class/leds/
    root@AP7403BDBC1D98:/# ls -1 /sys/class/leds/
    control:fwupgradelockcontrol
    green:guestport
    green:usb-enable
    green:usb1
    orange:diagnostic-led
    orange:internet-led
    orange:router-auto-led
    orange:wireless-org-led
    switchreset
    white:internet-led
    white:power-led
    white:router-led
    white:wireless-led
    

  • cat /sys/kernel/debug/gpio
    root@AP7403BDBC1D98:/# cat /sys/kernel/debug/gpio
    GPIOs 0-151, platform/msmgpio, msmgpio:
     gpio-0   (mdio                ) in  hi
     gpio-1   (mdc                 ) out lo
     gpio-3   (rst_n               ) out hi
     gpio-6   (usb_eject           ) in  hi
     gpio-7   (green:usb1          ) out lo
     gpio-8   (green:guestport     ) out lo
     gpio-9   (orange:diagnostic-le) out lo
     gpio-15  (control:fwupgradeloc) out hi
     gpio-16  (orange:internet-led ) out lo
     gpio-22  (white:internet-led  ) out lo
     gpio-23  (orange:wireless-org-) out lo
     gpio-24  (white:wireless-led  ) out hi
     gpio-25  (orange:router-auto-l) out lo
     gpio-26  (white:router-led    ) out lo
     gpio-48  (rst_n               ) out hi
     gpio-53  (white:power-led     ) out hi
     gpio-54  (reset               ) in  hi
     gpio-55  (routerswitch0       ) in  hi
     gpio-56  (routerswitch1       ) in  lo
     gpio-57  (autoswitch          ) in  hi
     gpio-58  (powerswitch         ) in  lo
     gpio-63  (switchreset         ) out lo
     gpio-64  (guestportswitch     ) in  hi
     gpio-65  (wps                 ) in  hi
     gpio-67  (usboverload         ) in  hi
     gpio-68  (green:usb-enable    ) out hi
    

  • bootlog
    BUFFALO WXR-2533DHP U-Boot Ver 1.14 (May 18 2015 - 13:24:36)
    
    CPU:   IPQ8064 clock 1.4 GHz
    DRAM:  DDR3 512 MiB clock 533 MHz
    NAND:  ECC 4 bits, 256 MiB
    SF: Detected W25Q32 with page size 64 KiB, total 4 MiB
    MMC:   
    In:    serial
    Out:   serial
    Err:   serial
    cdp: get part failed for 0:HLOS
    cdp: get part failed for rootfs
    Net:   MAC2 addr:74:3:bd:bc:1d:98
    athrs17_reg_init: complete
    athrs17_vlan_config ...done
    S17c init  done
    eth1
    Memory Test Start
    Pattern: 55555555
    Pattern: AAAAAAAA
    Pattern: 00000000
    Memory Test Pass 
    
    Hit any key to stop autoboot:  0 
    Checking Bank1 Image ... 
    Creating 1 MTD partitions on "nand0":
    0x000000000000-0x000004000000 : "mtd=0"
    Bank1 Image is good
    kernel_checksum is 0x74fdd894 , rootfs_checksum is 0x64 
    Checking Bank2 Image ... 
    Creating 1 MTD partitions on "nand0":
    0x000004000000-0x000008000000 : "mtd=0"
    Bank2 Image is good
    kernel_checksum is 0x74fdd894 , rootfs_checksum is 0x64 
    Bank1 Image the same as Bank2 Image 
    MMC Device 0 not found
    
    dmagic1 0 dmagic2 0 
     
    MMC Device 0 not found
    Device 1: nand1... is now current device
    Creating 1 MTD partitions on "nand0":
    0x000000000000-0x000004000000 : "mtd=0"
       Image Name:   Linux-3.4.103
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    1826120 Bytes = 1.7 MiB
       Load Address: 41508000
       Entry Point:  41508000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
    Setting up atags for msm partition: rootfs
    
    device nand0 , # parts = 1
     #: name                size            offset          mask_flags
     0: fs                  0x04000000      0x00000000      0
    
    active partition: nand0,0 - (fs) 0x04000000 @ 0x00000000
    
    defaults:
    mtdids  : none
    mtdparts: none
    Using machid 0x1260 from environment
    
    Starting kernel ...
    
    [    0.000000] Booting Linux on physical CPU 0
    [    0.000000] Linux version 3.4.103 (kenny@TWTEB2S1F204) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Wed Jun 21 15:01:38 CST 2017
    [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine: Qualcomm Atheros AP148 reference board
    [    0.000000] Partition (from atag) rootfs -- Offset:0 Size:200
    [    0.000000] Partition (from atag) rootfs_1 -- Offset:200 Size:200
    [    0.000000] msm_reserve_memory: 0x44000000, 0x600000
    [    0.000000] msm_reserve_memory: 0x44600000, 0x200000
    [    0.000000] memory pool 3 (start 5fc00000 size 400000) initialized
    [    0.000000] Memory policy: ECC disabled, Data cache writealloc
    [    0.000000] smem_find(137, 80): wrong size 72
    [    0.000000] socinfo_init: v6, id=202, ver=2.0, raw_id=2064, raw_ver=2064, hw_plat=0,  hw_plat_ver=65536
    [    0.000000]  accessory_chip=0 hw_plat_subtype=0
    [    0.000000] PERCPU: Embedded 8 pages/cpu @c0c64000 s10624 r8192 d13952 u32768
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121642
    [    0.000000] Kernel command line: console=ttyHSL1,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Memory: 43MB 436MB = 479MB total
    [    0.000000] Memory: 477312k/489600k available, 13184k reserved, 0K highmem
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xdf000000 - 0xff000000   ( 512 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xdeb00000   ( 491 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc050f000   (5148 kB)
    [    0.000000]       .init : 0xc0600000 - 0xc0702980   (1035 kB)
    [    0.000000]       .data : 0xc0704000 - 0xc07a14d0   ( 630 kB)
    [    0.000000]        .bss : 0xc07a14f4 - 0xc08608d4   ( 765 kB)
    [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000] NR_IRQS:1689
    [    0.000000] sched_clock: 32 bits at 32kHz, resolution 31240ns, wraps every 134175798ms
    [    0.000000] Console: colour dummy device 80x30
    [    0.150421] Calibrating delay using timer specific routine.. 12.56 BogoMIPS (lpj=62804)
    [    0.150452] pid_max: default: 32768 minimum: 301
    [    0.150921] Mount-cache hash table entries: 512
    [    0.152358] CPU: Testing write buffer coherency: ok
    [    0.152577] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.152577] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
    [    0.152702] Setting up static identity map for 0x41886bd8 - 0x41886c60
    [    0.155014] CPU1: Booted secondary processor
    [    0.155076] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.155170] Brought up 2 CPUs
    [    0.155201] SMP: Total of 2 processors activated (25.12 BogoMIPS).
    [    0.171758] dummy: 
    [    0.172446] NET: Registered protocol family 16
    [    0.173227] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
    [    0.175601] meminfo_init: smem ram ptable found: ver: 0 len: 5
    [    0.175632] Found 1 memory banks grouped into 8 memory regions
    [    0.175945] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
    [    0.176569] smem_find(137, 80): wrong size 72
    [    0.176601] socinfo_init: v6, id=202, ver=2.0, raw_id=2064, raw_ver=2064, hw_plat=0,  hw_plat_ver=65536
    [    0.176601]  accessory_chip=0 hw_plat_subtype=0
    [    0.176632] msm_rpm_init: RPM firmware 3.0.16777342
    [    0.184567] clk_tbl_nss - loaded
    [    0.212621] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    [    0.212621] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.213058] msm_dmov_memcpy_init: Success
    [    0.220431] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
    [    0.220431] sps:BAM 0x12244000 is registered.
    [    0.220712] sps:sps is ready.
    [    0.261480] msm_pcie_setup: link initialized
    [    0.261855] PCI host bridge to bus 0000:00
    [    0.261855] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fefffff]
    [    0.262386] PCI: bus0: Fast back to back transfers disabled
    [    0.262386] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.263105] PCI: bus1: Fast back to back transfers disabled
    [    0.301124] msm_pcie_setup: link initialized
    [    0.301468] PCI host bridge to bus 0000:02
    [    0.301468] pci_bus 0000:02: root bus resource [mem 0x2e000000-0x31efffff]
    [    0.301936] PCI: bus2: Fast back to back transfers disabled
    [    0.301968] pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [    0.302780] PCI: bus3: Fast back to back transfers disabled
    [    0.421368] msm_pcie_setup: link initialization failed
    [    0.421587] pci 0000:02:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
    [    0.421618] pci 0000:03:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
    [    0.421649] pci 0000:02:00.0: PCI bridge to [bus 03-03]
    [    0.421680] pci 0000:02:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
    [    0.421743] PCI: enabling device 0000:02:00.0 (0140 -> 0143)
    [    0.421805] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
    [    0.421836] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
    [    0.421868] pci 0000:00:00.0: PCI bridge to [bus 01-01]
    [    0.421899] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
    [    0.421930] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
    [    0.440706] bio: create slab  at 0
    [    0.442330] SCSI subsystem initialized
    [    0.443548] spi_qsd spi_qsd.5: master is unqueued, this is deprecated
    [    0.445985] spi_qsd spi_qsd.6: master is unqueued, this is deprecated
    [    0.450140] Switching to clocksource gp_timer
    [    0.471196] NET: Registered protocol family 2
    [    0.480974] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.481599] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.481786] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.481974] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.481974] TCP: reno registered
    [    0.482005] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.482036] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.482474] NET: Registered protocol family 1
    [    0.483911] Detected 5 counters on the L2CC PMU.
    [    0.485379] smd: register irq failed on wcnss_a11
    [    0.485379] smd: deregistering IRQs
    [    0.485473] SMD: smd_core_platform_init() failed
    [    0.486410] Partition(from smem) SBL1 -- Offset:0 Size:10000
    [    0.486441] Partition(from smem) MIBIB -- Offset:10000 Size:20000
    [    0.486441] Partition(from smem) SBL2 -- Offset:30000 Size:30000
    [    0.486472] Partition(from smem) SBL3 -- Offset:60000 Size:30000
    [    0.486504] Partition(from smem) DDRCONFIG -- Offset:90000 Size:10000
    [    0.486504] Partition(from smem) SSD -- Offset:a0000 Size:10000
    [    0.486535] Partition(from smem) TZ -- Offset:b0000 Size:30000
    [    0.486566] Partition(from smem) RPM -- Offset:e0000 Size:20000
    [    0.486597] Partition(from smem) APPSBL -- Offset:100000 Size:70000
    [    0.486597] Partition(from smem) APPSBLENV -- Offset:170000 Size:10000
    [    0.486629] Partition(from smem) ART -- Offset:180000 Size:40000
    [    0.486660] Partition(from smem) BOOTCONFIG -- Offset:1c0000 Size:10000
    [    0.486691] Partition(from smem) APPSBL_1 -- Offset:1d0000 Size:70000
    [    0.486722] SMEM boot info a5a3a1a0, 0: 3 
    [    0.504561] acpuclk-ipq806x acpuclk-ipq806x: SPEED BIN: 0
    [    0.504561] acpuclk-ipq806x acpuclk-ipq806x: ACPU PVS: 1
    [    0.511215] acpuclk-ipq806x acpuclk-ipq806x: CPU0: 6 frequencies supported
    [    0.511246] acpuclk-ipq806x acpuclk-ipq806x: CPU1: 6 frequencies supported
    [    0.512933] msm_rpm_log_probe: OK
    [    0.544892] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.544923] jffs2: version 2.2. (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
    [    0.546860] msgmni has been set to 932
    [    0.549359] io scheduler noop registered
    [    0.549390] io scheduler deadline registered (default)
    [    0.551358] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    [    0.554576] msm_serial_hs.0: ttyHS0 at MMIO 0x12490000 (irq = 227) is a MSM HS UART
    [    0.555201] msm_serial_hs module loaded
    [    0.555388] msm_serial_hsl: detected port #1
    [    0.555513] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16340000 (irq = 184) is a MSM
    [    0.555920] msm_serial_hsl: console setup on port #1
    [    1.346266] console [ttyHSL1] enabled
    [    1.349515] msm_serial_hsl: driver initialized
    [    1.356638] msm_nand_probe: phys addr 0x1ac00000 
    [    1.360387] msm_nand_probe: dmac 0x3
    [    1.363886] msm_nand_probe: allocated dma buffer at ffdfc000, dma_addr 5f5b8000
    [    1.372758] status: 20
    [    1.374101] nandid: 1590aa2c maker 2c device aa
    [    1.378631] ONFI probe : Found an ONFI compliant device MT29F2G08ABBEAH4    ,
    [    1.385941] Found a supported NAND device
    [    1.389721] NAND Controller ID : 0x4030
    [    1.393595] NAND Device ID  : 0x1590aa2c
    [    1.397438] Buswidth : 8 Bits
    [    1.400437] Density  : 256 MByte
    [    1.403623] Pagesize : 2048 Bytes
    [    1.406904] Erasesize: 131072 Bytes
    [    1.410434] Oobsize  : 64 Bytes
    [    1.413495] CFG0 Init  : 0xa8d408c0
    [    1.416963] CFG1 Init  : 0x0004745c
    [    1.420493] ECCBUFCFG  : 0x00000203
    [    1.424711] Creating 2 MTD partitions on "msm_nand":
    [    1.428865] 0x000000000000-0x000004000000 : "rootfs"
    [    1.583161] mtd: partition "rootfs" set to be root filesystem
    [    1.588722] split_squashfs: no squashfs found in "msm_nand"
    [    1.593502] 0x000004000000-0x000008000000 : "rootfs_1"
    [    1.751515] m25p80 spi5.0: found w25q32, expected s25fl512s
    [    1.756107] m25p80 spi5.0: w25q32 (4096 Kbytes)
    [    1.761262] Creating 13 MTD partitions on "m25p80":
    [    1.765448] 0x000000000000-0x000000010000 : "SBL1"
    [    1.772789] 0x000000010000-0x000000030000 : "MIBIB"
    [    1.778975] 0x000000030000-0x000000060000 : "SBL2"
    [    1.785160] 0x000000060000-0x000000090000 : "SBL3"
    [    1.791315] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
    [    1.797938] 0x0000000a0000-0x0000000b0000 : "SSD"
    [    1.804186] 0x0000000b0000-0x0000000e0000 : "TZ"
    [    1.810246] 0x0000000e0000-0x000000100000 : "RPM"
    [    1.816307] 0x000000100000-0x000000170000 : "APPSBL"
    [    1.822586] 0x000000170000-0x000000180000 : "APPSBLENV"
    [    1.829209] 0x000000180000-0x0000001c0000 : "ART"
    [    1.835582] 0x0000001c0000-0x0000001d0000 : "BOOTCONFIG"
    [    1.842299] 0x0000001d0000-0x000000240000 : "APPSBL_1"
    [    1.849734] UBI: attaching mtd0 to ubi0
    [    1.852577] UBI: physical eraseblock size:   131072 bytes (128 KiB)
    [    1.858794] UBI: logical eraseblock size:    126976 bytes
    [    1.864573] UBI: smallest flash I/O unit:    2048
    [    1.868853] UBI: VID header offset:          2048 (aligned 2048)
    [    1.875070] UBI: data offset:                4096
    [    2.943111] UBI: max. sequence number:       384
    [    2.970446] UBI: attached mtd0 to ubi0
    [    2.973164] UBI: MTD device name:            "rootfs"
    [    2.978194] UBI: MTD device size:            64 MiB
    [    2.983099] UBI: number of good PEBs:        512
    [    2.987660] UBI: number of bad PEBs:         0
    [    2.992127] UBI: number of corrupted PEBs:   0
    [    2.996501] UBI: max. allowed volumes:       128
    [    3.001155] UBI: wear-leveling threshold:    4096
    [    3.005810] UBI: number of internal volumes: 1
    [    3.010278] UBI: number of user volumes:     3
    [    3.014651] UBI: available PEBs:             171
    [    3.019243] UBI: total number of reserved PEBs: 341
    [    3.024211] UBI: number of PEBs reserved for bad PEB handling: 5
    [    3.030146] UBI: max/mean erase counter: 15/1
    [    3.034457] UBI: image sequence number:  0
    [    3.038550] UBI: background thread "ubi_bgt0d" started, PID 616
    [    3.086066] GPIO Bitbanged MDIO: probed
    [    3.095563] cpuidle: using governor ladder
    [    3.098656] cpuidle: using governor menu
    [    3.105060] TCP: cubic registered
    [    3.107341] Initializing XFRM netlink socket
    [    3.111683] NET: Registered protocol family 17
    [    3.116119] L2TP core driver, V2.0
    [    3.119431] L2TP netlink interface
    [    3.123180] 8021q: 802.1Q VLAN Support v1.8
    [    3.127116] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
    [    3.134801] Registering SWP/SWPB emulation handler
    [    3.139487] clock_late_init: Removing enables held for handed-off clocks
    [    3.155014] ipq_nss_get_mac_addr: MAC[0]: 74:03:bd:bc:1d:98
    [    3.159668] ipq_nss_get_mac_addr: MAC[1]: 74:03:bd:bc:1d:99
    [    3.165260] ipq_nss_get_mac_addr: MAC[2]: 74:03:bd:bc:1d:98
    [    3.170790] ipq_nss_get_mac_addr: MAC[3]: 74:03:bd:bc:1d:99
    [    3.176444] no pmic restart interrupt specified
    [    3.182380] msm_cache_dump_probe: could not register L2 buffer ret = -22.
    [    3.198375] VFS: Mounted root (squashfs filesystem) readonly on device 31:16.
    [    3.205123] Freeing init memory: 1032K
    - preinit -
    Press the [f] key and hit [enter] to enter failsafe mode
    - regular preinit -
    [    8.520556] UBIFS: recovery needed
    [    8.751358] UBIFS: recovery completed
    [    8.754014] UBIFS: mounted UBI device 0, volume 2, name "ubi_rootfs_data"
    [    8.760793] UBIFS: file system size:   4190208 bytes (4092 KiB, 3 MiB, 33 LEBs)
    [    8.768041] UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
    [    8.775195] UBIFS: media format:       w4/r0 (latest is w4/r0)
    [    8.780974] UBIFS: default compressor: lzo
    [    8.785035] UBIFS: reserved for root:  197913 bytes (193 KiB)
    switching to ubifs
    - init -
    i=/etc/init.d/S10boot
    [   10.117806] ssdk_plat_init start
    [   10.120056] Register QCA PHY driver
    [   10.124648] ######## Make proc simple_phy_proc_entry directory success ########
    [   10.130927] ######## Create proc file reg success ########
    [   10.136363] ######## Create proc file ledctl success ########
    [   10.142143] ######## Create proc file debug success ########
    [   10.772414] qca-ssdk module init succeeded!
    [   11.083942] Bridge firewalling registered
    [   11.255139] NET: Registered protocol family 10
    [   11.577507] usbcore: registered new interface driver usbfs
    [   11.582130] usbcore: registered new interface driver hub
    [   11.587472] usbcore: registered new device driver usb
    [   11.745110] md: linear personality registered for level -1
    [   11.779006] md: raid0 personality registered for level 0
    [   11.793345] md: raid1 personality registered for level 1
    [   11.829740] Button Hotplug driver version 0.4.1
    [   11.898437] NTFS driver 2.1.30 [Flags: R/O MODULE].
    [   12.110809] NET: Registered protocol family 15
    [   12.298969] PPP generic driver version 2.4.2
    [   12.674289] PPP MPPE Compression module registered
    [   12.708216] **********************************************************
    [   12.713589] * Driver    :NSS GMAC Driver for RTL v(3.72a)
    [   12.718931] * Version   :1.0
    [   12.721805] * Copyright :Copyright (c) 2013-2014 The Linux Foundation. All rights reserved.
    [   12.730146] **********************************************************nss_driver - fw of size 352256  bytes copied to load addr: 40000000, nss_id : 0
    [   14.263667] nss_driver - Turbo Support 1
    [   14.267135] bf30fca5: NSS Shaping is enabled, handler id: 0
    [   14.311996] nss_driver - fw of size 5400  bytes copied to load addr: 40800000, nss_id : 1
    [   14.320243] Error - Duplicate Interface CB Registered for interface 75
    [   14.325741] Error - Duplicate Interface CB Registered for interface 78
    [   14.369540] IPv6 over IPv4 tunneling driver
    [   14.414276] nss_macsec init success
    [   14.450452] asf: module license 'Proprietary' taints kernel.
    [   14.455107] Disabling lock debugging due to kernel taint
    [   14.729896] ath_hal: 0.9.17.1 (AR5416, AR9380, WRITE_EEPROM, 11D)
    [   14.745673] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
    [   14.764386] ath_dfs: Version 2.0.0
    [   14.764386] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
    [   14.785067] ath_spectral: Version 2.0.0
    [   14.785067] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
    [   14.795657] SPECTRAL module built on Jun 21 2017 14:04:26
    [   14.841018] ath_tx99: Version 2.0
    [   14.841018] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
    [   15.046048] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
    [   15.053639] create channel init
    [   15.056669] create channel 5g init
    [   15.060043] create wds init
    [   15.063105] create mac init
    [   15.065604] create mac 5g init
    [   15.068634] create wds lock 
    [   15.071508] create wds 5g lock
    [   16.024054] ath_pci:  (Atheros/multi-bss)
    [   16.027054] ath_pci_probe
    [   16.029646] PCI device id is 0040 :0040
    [   16.033520] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
    [   16.039300] ath_pci 0000:01:00.0: ath DEBUG: sc=0xdd701600
    [   16.044579] 
    [   16.044579]  ol_ath_pci_configure : num_desired MSI set to 0
    [   16.051733] 
    [   16.051733]  Using PCI Legacy Interrupt
    [   16.056982] chip_id 9 chip_revision 1 
    [   16.061199] 
    [   16.061199]  address 4008f8 data daf99c30 
    [   16.067291] 
    [   16.067291]  address 401e90 data daf99c34 
    [   16.073914] 
    [   16.073914]  address 401e94 data daf99c38 
    [   16.080506] 
    [   16.080506]  address 401eb0 data daf99c3c 
    [   16.087097] 
    [   16.087097]  address 400900 data daf99c3c 
    [   16.093689] 
    [   16.093689]  CLOCK PLL skipped 
    [   16.097250] HIF_PCIDeviceProbed: setting the target pll frac ffffffff intval ffffffff
    [   16.105092] HIF_PCIDeviceProbed: no frac provided, skipping pre-configuring PLL
    [   16.112371] HIF_PCIDeviceProbed: ar900b_20_targ_clk is not provided, skipping pre-configuring PLL
    [   16.121243] 
    [   16.121243]  address 4008cc data daf99c3c 
    [   16.128865] __ol_ath_attach: ath_attach TODO
    [   16.132114] __ol_ath_attach 1732 host_enable 0 nss_nwifi_offload 0
    [   16.138238] __ol_ath_attach: dev name wifi0
    [   16.142424] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
    [   16.151796]  OL_ACBKMinfree : 0
    [   16.154920]  OL_ACBEMinfree : 0
    [   16.158044]  OL_ACVIMinfree : 0
    [   16.161168]  OL_ACVOMinfree : 0
    [   16.164292] ol_ath_attach() BMI inited.
    [   16.168228] ol_ath_attach() BMI Get Target Info.
    [   16.172758] ol_ath_attach() TARGET TYPE: 9 Vers 0x1000000
    [   16.178100] 
    [   16.178100]  CE WAR Disabled
    [   16.182599] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
    [   16.188034] ol_ath_attach() configure Target .
    [   16.192377] 
    [   16.192377]  Target Version is 1000000
    [   16.197469] 
    [   16.197469]  Flash Download Address  c0000 
    [   16.203124] ol_transfer_bin_file: flash data file defined
    [   16.208497] Cal location [0]: 00000000
    [   16.212246] 
    [   16.212246]  Wifi0 Select OFFSET 1000
    [   16.236707] qc98xx_verify_checksum: flash checksum passed: 0x2d4b
    [   16.241799] ol_transfer_bin_file 2876: Download Flash data len 12064
    [   16.248266] Board extended Data download address: 0x0
    [   16.273352] 
    [   16.273352]  Board data initialized
    [   16.277350] Flash download ADDRESS 0xc0000
    [   16.281412] 
    [   16.281412]  Selecting  OTP binary for CHIP Version 1
    [   16.399343] 
    [   16.399343]  First OTP send param 8000
    [   16.804092] [WIRED eth0: wan port is up...]
    [   21.017463] ol_ath_download_firmware :First  OTP download and Execute is good  return param 33792
    [   21.025367] 
    [   21.025367] ##Board Id 1
    [   21.029303] 
    [   21.029303] ##CHIP Id 1
    [   21.033302] 
    [   21.033302]  BOARDDATA DOWNLOAD TO address c0000
    [   21.121649] ol_transfer_bin_file: Board data file: AR900B/hw.2/boardData_AR900B_CUS239_5G_v2_001.bin ARXXXX v=0x1
    [   21.139956] Board extended Data download address: 0x0
    [   21.164386] ol_ath_download_firmware: Using 0x1234 for the remainder of init
    [   21.170415] 
    [   21.170446]  Selecting  OTP binary for CHIP Version 1
    [   21.218369] 
    [   21.218369]  Second otp download Param 10000 
    [   25.844704] ol_ath_download_firmware : OTP download and Execute is good 
    [   25.850421] 
    [   25.850421]  FIRMWARE : Beeliner CHIP Version 1
    [   25.865666] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=131072 
    [   25.881349] Swap: bytes_left to copy: fw:16; dma_page:42024
    [   25.885910] Swap: wrong length read:0
    [   25.889565] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 89048 Target address 4175c8 
    [   25.898437] scn=db6c0480  target_write_addr=4175c8 seg_info=de1dd410 
    [   25.904779] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 
    [   25.913527] bin_filename=AR900B/hw.2/athwlan.bin swap_filename=/lib/firmware/AR900B/hw.2/athwlan.codeswap.bin 
    [   27.428397] ol_ath_attach() Download FW. 
    [   27.431427] ol_ath_attach() HT Create .
    [   27.435176] ol_ath_attach() HIF Claim.
    [   27.438987] ol_ath_attach() BMI Done. 
    [   27.442705] ol_ath_attach() WMI attached. wmi_handle db080000 
    [   27.448484] +HWT
    [   27.453170] CE_recv_buf_enqueue 809 Populate last entry 512 for CE 5
    [   27.458481] CE_recv_buf_enqueue 818 CE 5 wi 511 dest_ptr 0x5b822040 nbytes 0 recv_ctxt 0xdb63e600
    [   27.467760] Target:dd3d8800 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
    [   27.474445] -HWT
    [   27.476226] 
    [   27.476226] 
    [   27.482005] Target:dd3d8800 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready
    [   27.488878] HTC Service:0x0300 ep:1 TX flow control disabled
    [   27.496313] CE_pkt_dl_len_set CE 4 Pkt download length 64
    [   27.500749] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from da030000
    [   27.508840] Target:dd3d8800 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
    [   27.515651] HTC Service:0x0100 ep:2 TX flow control disabled
    [   27.522055] wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event 
    [   27.528022] num_rf_chain : 00000004
    [   27.531490] ht_cap_info: : 0000085b
    [   27.534957] vht_cap_info : 339b79b2
    [   27.538425] vht_supp_mcs : 0000ffea
    [   27.541893] ol_ath_service_ready_event: tt_support: 1
    [   27.546954] Peer Caching Enabled ; num_peers = 528, num_active_peers = 66 num_tids = 132, num_vdevs = 16
    [   27.556419] idx 0 req 1  num_units 0 num_unit_info 2 unit size 1296 actual units 529 
    [   27.564667] idx 1 req 2  num_units 1 num_unit_info 4 unit size 256 actual units 67 
    [   27.571883] idx 2 req 3  num_units 1 num_unit_info 4 unit size 1024 actual units 67 
    [   27.579631] idx 3 req 4  num_units 1 num_unit_info 4 unit size 4096 actual units 67 
    [   27.587503] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35 
    [   27.595220] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1 
    [   27.602780] idx 6 req 5  num_units 0 num_unit_info 2 unit size 1628 actual units 529 
    [   27.610965] chunk 0 len 685584 requested ,ptr  0x5b600000 
    [   27.616026] chunk 1 len 17152 requested ,ptr  0x5b550000 
    [   27.621462] chunk 2 len 68608 requested ,ptr  0x5b580000 
    [   27.626804] chunk 3 len 274432 requested ,ptr  0x5b700000 
    [   27.632271] chunk 4 len 107520 requested ,ptr  0x5c620000 
    [   27.637738] chunk 5 len 6144 requested ,ptr  0x5c4a4000 
    [   27.643049] chunk 6 len 861212 requested ,ptr  0x5b000000 
    [   27.700437] wmi_ready_event_rx:  WMI UNIFIED READY event 
    [   27.704842] ol_ath_connect_htc() WMI is ready
    [   27.709153] ol_ath_set_host_app_area TODO
    [   27.713214] target uses HTT version 2.1; host uses 2.1
    [   27.723273] ol_ath_attach() connect HTC. 
    [   27.726273] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
    [   27.738019] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
    [   27.745079] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
    [   27.751890] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
    [   27.758731] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
    [   27.765729] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
    [   27.772727] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
    [   27.780006] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
    [   27.787378] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
    [   27.794876] Add VHT80 channel: 5210
    [   27.798219] Add VHT80 channel: 5290
    [   27.805654] Add VHT80 channel: 5530
    [   27.808122] Add VHT80 channel: 5610
    [   27.811621] Add VHT80 channel: 5690
    [   27.815057] Add VHT80 channel: 5775
    [   27.818556] Skipping VHT80 channel 5825
    [   27.822680] ol_ath_phyerr_attach: called
    [   27.826335] OL Resmgr Init-ed
    [   27.829240] ieee80211_bsteering_attach: Band steering initialized
    [   27.835332] ol_if_spectral_setup
    [   27.838519] SPECTRAL : get_capability not registered
    [   27.843455] HAL_CAP_PHYDIAG : Capable
    [   27.847110] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
    [   27.855201] SPECTRAL : get_capability not registered
    [   27.860168] HAL_CAP_RADAR   : Capable
    [   27.863761] SPECTRAL : Need to fix the capablity check for SPECTRAL
    [   27.863761]  (spectral_attach : 236)
    [   27.873602] SPECTRAL : get_capability not registered
    [   27.878537] HAL_CAP_SPECTRAL_SCAN : Capable
    [   27.882692] SPECTRAL : get_tsf64 not registered
    [   27.887222] spectral_init_netlink 65 NULL SKB
    [   27.891596] Green-AP : Green-AP : Attached
    [   27.891596] 
    [   27.897157] Green-AP : Attached
    [   27.900249] rate power table override is only supported for AR98XX
    [   27.906435] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
    [   27.913683] ieee80211com_init_netlink: 3223: Wifipos 1st Netlink socket created:dd72bc00
    [   27.921711] ol_if_dfs_setup: called 
    [   27.925242] ol_if_dfs_attach: called; ptr=db161984, radar_info=daf99be0
    [   27.932052] ol_ath_rtt_meas_report_attach: called
    [   27.936832] ol_ath_attach() UMAC attach . 
    [   27.940643] ol_if_dfs_configure: called
    [   27.944392] ol_if_dfs_configure: FCC domain
    [   27.948578] ol_if_dfs_disable: called
    [   27.952264] ol_ath_attach: Calling ol_if_dfs_configure
    [   27.957357] 
    [   27.957357]  BURSTING enabled by default
    [   27.962886] osif_wrap_attach:400 osif wrap attached
    [   27.967603] osif_wrap_devt_init:361 osif wrap dev table init done
    [   27.973695]  Wrap Attached: Wrap_com =de2d2a00 ic->ic_wrap_com=de2d2a00 &wrap_com->wc_devt=de2d2a00 
    [   27.982786] __ol_ath_attach: init tx/rx TODO
    [   27.987035] __ol_ath_attach: needed_headroom reservation 44
    [   27.993033] ol_ath_thermal_mitigation_attach: ++
    [   27.997282] ol_ath_thermal_mitigation_attach: --
    [   28.001874] ath_pci_probe
    [   28.004404] PCI device id is 0040 :0040
    [   28.008216] PCI: enabling device 0000:03:00.0 (0140 -> 0142)
    [   28.014151] ath_pci 0000:03:00.0: ath DEBUG: sc=0xde1caa00
    [   28.019337] 
    [   28.019337]  ol_ath_pci_configure : num_desired MSI set to 0
    [   28.026491] 
    [   28.026491]  Using PCI Legacy Interrupt
    [   28.031771] chip_id 9 chip_revision 1 
    [   28.035738] 
    [   28.035738]  address 4008f8 data daf99c30 
    [   28.042080] 
    [   28.042080]  address 401e90 data daf99c34 
    [   28.048672] 
    [   28.048672]  address 401e94 data daf99c38 
    [   28.055295] 
    [   28.055295]  address 401eb0 data daf99c3c 
    [   28.061886] 
    [   28.061886]  address 400900 data daf99c3c 
    [   28.068478] 
    [   28.068478]  CLOCK PLL skipped 
    [   28.072071] HIF_PCIDeviceProbed: setting the target pll frac ffffffff intval ffffffff
    [   28.079881] HIF_PCIDeviceProbed: no frac provided, skipping pre-configuring PLL
    [   28.087160] HIF_PCIDeviceProbed: ar900b_20_targ_clk is not provided, skipping pre-configuring PLL
    [   28.096094] 
    [   28.096126]  address 4008cc data daf99c3c 
    [   28.103655] __ol_ath_attach: ath_attach TODO
    [   28.106872] __ol_ath_attach 1732 host_enable 0 nss_nwifi_offload 0
    [   28.113089] __ol_ath_attach: dev name wifi1
    [   28.117213] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
    [   28.126616]  OL_ACBKMinfree : 0
    [   28.129709]  OL_ACBEMinfree : 0
    [   28.132864]  OL_ACVIMinfree : 0
    [   28.135957]  OL_ACVOMinfree : 0
    [   28.139112] ol_ath_attach() BMI inited.
    [   28.143049] ol_ath_attach() BMI Get Target Info.
    [   28.147516] ol_ath_attach() TARGET TYPE: 9 Vers 0x1000000
    [   28.152920] 
    [   28.152920]  CE WAR Disabled
    [   28.157388] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
    [   28.162886] ol_ath_attach() configure Target .
    [   28.167135] 
    [   28.167135]  Target Version is 1000000
    [   28.172258] 
    [   28.172258]  Flash Download Address  c0000 
    [   28.177881] ol_transfer_bin_file: flash data file defined
    [   28.183286] Cal location [1]: 00004000
    [   28.187035] 
    [   28.187035]  Wifi1 Select OFFSET 5000
    [   28.211465] qc98xx_verify_checksum: flash checksum passed: 0x603b
    [   28.216557] ol_transfer_bin_file 2876: Download Flash data len 12064
    [   28.223086] Board extended Data download address: 0x0
    [   28.248234] 
    [   28.248234]  Board data initialized
    [   28.252264] Flash download ADDRESS 0xc0000
    [   28.256263] 
    [   28.256263]  Selecting  OTP binary for CHIP Version 1
    [   28.304373] 
    [   28.304373]  First OTP send param 8000
    [   28.447360] [wifi0] FWLOG: [28123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x518, 0x518, 0x0 )
    [   28.454920] [wifi0] FWLOG: [28123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x518, 0x518, 0x0 )
    [   28.463605] [wifi0] FWLOG: [28123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x518, 0x518, 0x0 )
    [   28.472289] [wifi0] FWLOG: [28123] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x518, 0x518, 0x0 )
    [   32.922492] ol_ath_download_firmware :First  OTP download and Execute is good  return param 34816
    [   32.930396] 
    [   32.930396] ##Board Id 2
    [   32.934333] 
    [   32.934333] ##CHIP Id 1
    [   32.938331] 
    [   32.938331]  BOARDDATA DOWNLOAD TO address c0000
    [   32.944392] ol_transfer_bin_file: Board data file: AR900B/hw.2/boardData_AR900B_CUS260_2G_v2_002.bin ARXXXX v=0x1
    [   32.963573] Board extended Data download address: 0x0
    [   32.988097] ol_ath_download_firmware: Using 0x1234 for the remainder of init
    [   32.994189] 
    [   32.994189]  Selecting  OTP binary for CHIP Version 1
    [   33.042080] 
    [   33.042080]  Second otp download Param 10000 
    [   37.668416] ol_ath_download_firmware : OTP download and Execute is good 
    [   37.674101] 
    [   37.674101]  FIRMWARE : Beeliner CHIP Version 1
    [   37.689222] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=131072 
    [   37.704967] Swap: bytes_left to copy: fw:16; dma_page:42024
    [   37.709497] Swap: wrong length read:0
    [   37.713183] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 89048 Target address 4175c8 
    [   37.722086] scn=d9c00480  target_write_addr=4175c8 seg_info=dd9c1710 
    [   37.728334] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 
    [   37.737144] bin_filename=AR900B/hw.2/athwlan.bin swap_filename=/lib/firmware/AR900B/hw.2/athwlan.codeswap.bin 
    [   38.827553] ol_ath_attach() Download FW. 
    [   38.830584] ol_ath_attach() HT Create .
    [   38.834364] ol_ath_attach() HIF Claim.
    [   38.838144] ol_ath_attach() BMI Done. 
    [   38.841861] ol_ath_attach() WMI attached. wmi_handle d9be0000 
    [   38.847641] +HWT
    [   38.852296] CE_recv_buf_enqueue 809 Populate last entry 512 for CE 5
    [   38.857606] CE_recv_buf_enqueue 818 CE 5 wi 511 dest_ptr 0x5adb0040 nbytes 0 recv_ctxt 0xd9c7e900
    [   38.867041] Target:da2c1800 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
    [   38.873539] -HWT
    [   38.875320] 
    [   38.875351] 
    [   38.881099] Target:da2c1800 HTC Service:0x0300, ULpipe:4 DLpipe:5 id:1 Ready
    [   38.888003] HTC Service:0x0300 ep:1 TX flow control disabled
    [   38.895282] CE_pkt_dl_len_set CE 4 Pkt download length 64
    [   38.899687] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from d95c0000
    [   38.907872] Target:da2c1800 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
    [   38.914620] HTC Service:0x0100 ep:2 TX flow control disabled
    [   38.921024] wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event 
    [   38.926991] num_rf_chain : 00000004
    [   38.930459] ht_cap_info: : 0000085b
    [   38.933926] vht_cap_info : 339b79b2
    [   38.937394] vht_supp_mcs : 0000ffea
    [   38.940862] ol_ath_service_ready_event: tt_support: 1
    [   38.945923] Peer Caching Enabled ; num_peers = 528, num_active_peers = 66 num_tids = 132, num_vdevs = 16
    [   38.955357] idx 0 req 1  num_units 0 num_unit_info 2 unit size 1296 actual units 529 
    [   38.963636] idx 1 req 2  num_units 1 num_unit_info 4 unit size 256 actual units 67 
    [   38.970884] idx 2 req 3  num_units 1 num_unit_info 4 unit size 1024 actual units 67 
    [   38.978600] idx 3 req 4  num_units 1 num_unit_info 4 unit size 4096 actual units 67 
    [   38.986472] idx 4 req 6  num_units 35 num_unit_info 0 unit size 3072 actual units 35 
    [   38.994158] idx 5 req 7  num_units 1 num_unit_info 0 unit size 6144 actual units 1 
    [   39.001749] idx 6 req 5  num_units 0 num_unit_info 2 unit size 1628 actual units 529 
    [   39.009903] chunk 0 len 685584 requested ,ptr  0x5ab00000 
    [   39.015026] chunk 1 len 17152 requested ,ptr  0x5a400000 
    [   39.020399] chunk 2 len 68608 requested ,ptr  0x5a420000 
    [   39.025773] chunk 3 len 274432 requested ,ptr  0x5a480000 
    [   39.031240] chunk 4 len 107520 requested ,ptr  0x5b140000 
    [   39.036707] chunk 5 len 6144 requested ,ptr  0x5b170000 
    [   39.042018] chunk 6 len 861212 requested ,ptr  0x5a500000 
    [   39.101968] wmi_ready_event_rx:  WMI UNIFIED READY event 
    [   39.106404] ol_ath_connect_htc() WMI is ready
    [   39.110746] ol_ath_set_host_app_area TODO
    [   39.114714] target uses HTT version 2.1; host uses 2.1
    [   39.123836] ol_ath_attach() connect HTC. 
    [   39.126804] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
    [   39.138581] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
    [   39.145423] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
    [   39.152202] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
    [   39.158950] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
    [   39.165854] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
    [   39.173070] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
    [   39.180224] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
    [   39.187503] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
    [   39.194876] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
    [   39.202280] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
    [   39.209621] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
    [   39.217213] ol_ath_phyerr_attach: called
    [   39.221087] OL Resmgr Init-ed
    [   39.223992] ieee80211_bsteering_attach: Band steering initialized
    [   39.230053] ol_if_spectral_setup
    [   39.233270] SPECTRAL : get_capability not registered
    [   39.238175] HAL_CAP_PHYDIAG : Capable
    [   39.241861] SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 231)
    [   39.249921] SPECTRAL : get_capability not registered
    [   39.254857] HAL_CAP_RADAR   : Capable
    [   39.258481] SPECTRAL : Need to fix the capablity check for SPECTRAL
    [   39.258512]  (spectral_attach : 236)
    [   39.268353] SPECTRAL : get_capability not registered
    [   39.273258] HAL_CAP_SPECTRAL_SCAN : Capable
    [   39.277475] SPECTRAL : get_tsf64 not registered
    [   39.281943] spectral_init_netlink 65 NULL SKB
    [   39.286285] Green-AP : Green-AP : Attached
    [   39.286285] 
    [   39.291846] Green-AP : Attached
    [   39.294970] rate power table override is only supported for AR98XX
    [   39.301187] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
    [   39.308372] ieee80211com_init_netlink: Socket already created dd72bc00
    [   39.314901] ol_if_dfs_setup: called 
    [   39.318400] ol_if_dfs_attach: called; ptr=d9c61984, radar_info=daf99be0
    [   39.325242] ol_ath_rtt_meas_report_attach: called
    [   39.329803] ol_ath_attach() UMAC attach . 
    [   39.333833] ol_if_dfs_configure: called
    [   39.337582] ol_if_dfs_configure: FCC domain
    [   39.341768] ol_if_dfs_disable: called
    [   39.345423] ol_ath_attach: Calling ol_if_dfs_configure
    [   39.350546] 
    [   39.350546]  BURSTING enabled by default
    [   39.356013] osif_wrap_attach:400 osif wrap attached
    [   39.360824] osif_wrap_devt_init:361 osif wrap dev table init done
    [   39.366854]  Wrap Attached: Wrap_com =de1ca600 ic->ic_wrap_com=de1ca600 &wrap_com->wc_devt=de1ca600 
    [   39.376038] __ol_ath_attach: init tx/rx TODO
    [   39.380224] __ol_ath_attach: needed_headroom reservation 44
    [   39.386191] ol_ath_thermal_mitigation_attach: ++
    [   39.390440] ol_ath_thermal_mitigation_attach: --
    [   39.430053] Initializing Pktlogs for 11ac
    [   39.433083] Initializing Pktlogs for 11ac
    [   39.469853] __sa_init_module 
    [   39.538081] gre: GRE over IPv4 demultiplexor driver
    [   39.569728] ip_gre: GRE over IPv4 tunneling driver
    [   39.607903] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    [   39.729646] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   39.846422] [wifi1] FWLOG: [39758] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x518, 0x518, 0x0 )
    [   39.854014] [wifi1] FWLOG: [39758] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x518, 0x518, 0x0 )
    [   39.862699] [wifi1] FWLOG: [39758] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x518, 0x518, 0x0 )
    [   39.871352] [wifi1] FWLOG: [39758] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x518, 0x518, 0x0 )
    [   39.940268] br10_ip: Module loaded.
    [   39.970040] NET: Registered protocol family 24
    [   40.010496] QCA Hy-Fi multicast installation successfully
    [   40.014901] QCA Hy-Fi netfilter installation: OK
    [   40.150171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [   40.155763] msm_hsusb_host msm_hsusb_host: unable to find transceiver
    [   40.196532] nf_conntrack version 0.5.0 (7474 buckets, 29896 max)
    [   40.448172] PPPoL2TP kernel driver, V2.0
    [   40.461137] PPTP driver version 0.8.5
    [   40.823961] xt_time: kernel timezone is -0000
    [   41.241174] nf_conntrack_rtsp v0.6.21 loading
    [   41.254514] nf_nat_rtsp v0.6.21 loading
    [   41.286941] xt_RAWNAT: Unknown symbol ipv6_find_hdr (err 0)
    [   41.302093] Netfilter messages via NETLINK v0.30.
    [   41.337675] Ebtables v2.0 registered
    [   41.576975] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   41.711871] ctnetlink v0.93: registering with nfnetlink.
    [   41.812714] ipq-dwc3 ipq-dwc3.0: unable to read platform data num of dbm eps
    [   41.919150] xhci-hcd xhci-hcd.0: xHCI Host Controller
    [   41.923273] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
    [   41.930521] xhci-hcd xhci-hcd.0: irq 142, io mem 0x11000000
    [   41.936363] hub 1-0:1.0: USB hub found
    [   41.939706] hub 1-0:1.0: 1 port detected
    [   41.943767] xhci-hcd xhci-hcd.0: xHCI Host Controller
    [   41.948641] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
    [   41.956201] hub 2-0:1.0: USB hub found
    [   41.959575] hub 2-0:1.0: 1 port detected
    [   41.965260] ipq-dwc3 ipq-dwc3.1: unable to read platform data num of dbm eps
    [   42.071758] xhci-hcd xhci-hcd.1: xHCI Host Controller
    [   42.075820] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
    [   42.083099] xhci-hcd xhci-hcd.1: irq 237, io mem 0x10000000
    [   42.088972] hub 3-0:1.0: USB hub found
    [   42.092314] hub 3-0:1.0: 1 port detected
    [   42.096344] xhci-hcd xhci-hcd.1: xHCI Host Controller
    [   42.101249] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
    [   42.108747] hub 4-0:1.0: USB hub found
    [   42.112183] hub 4-0:1.0: 1 port detected
    [   42.366572] ECM init
    [   42.371134] ECM init complete
    [   42.447672] input: gpio-keys as /devices/platform/gpio-keys/input/input0
    [   42.631771] Initializing USB Mass Storage driver...
    [   42.635770] usbcore: registered new interface driver usb-storage
    [   42.641768] USB Mass Storage support registered.
    [   42.691315] fuse init (API version 7.18)
    mount: mounting sys on /sys failed: Device or resource busy
    i=/etc/init.d/S11ubus
    i=/etc/init.d/S15bootup_start
    rootdir=/
    table='/etc/device_table.txt'
    makedevs: line 102: can't create node dev/watchdog: File exists
    Thu Jan  1 00:00:00 GMT 2015
    ###########control to LOW #########
    User can't press power switch button to reset board
    
    
    $Shutting down /usr/bin/usb_power_saving: 
    killall: usb_power_saving: no process killed
    
    
    firmware_version = 1.32_1.04JP
    $Starting syslogd: 
    syslogd -m -1
    
    
    
    
    
    
    
    
    wan_hwaddr=74:03:BD:BC:1D:99
    ************* AUTO WP MODE ****************
    cat: can't open '/tmp/fw_upgrade_running': No such file or directory
    cat: can't open 'var/run/monbutton.pid': No such file or directory
    BOOTCODE VER            : 1.14
    ============================start monbutton=========================
    show_buffddns :Success get APPSBLENV mtd device name - 11
    show_buffddns: buff=/dev/mtd11
    the ddns user magic ID is not correct
     cat: can't open '/tmp/mtd1_ddns': No such file or directory
    i=/etc/init.d/S20create_chans
    i=/etc/init.d/S31lan_start
    lan_start.sh
    did
    Configuring LAN , lan_ifname = br0 ........
    [   50.622617] device eth1 entered promiscuous mode
    LAN_IPADDR = 192.168.11.1
    [   50.628741] br0: port 1(eth1) entered forwarding state
    [   50.633708] br0: port 1(eth1) entered forwarding state
    set igmp aging time 300
    [   50.706248] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   50.803998] [WIRED eth0: wan port not up carrier]
    
     SSDK Init OK!
    operate done.
    
    i=/etc/init.d/S39usb
    i=/etc/init.d/S40guest_start
    cat: can't open 'var/run/monGuestAuth.pid': No such file or directory
    cat: can't open 'var/run/Guest_countdown.pid': No such file or directory
    test button start
    guest stop 
    i=/etc/init.d/S50cron
    i=/etc/init.d/S50radvd
    i=/etc/init.d/S50slpd
    ifconfig: br-lan: error fetching interface information: Device not found
    i=/etc/init.d/S50wlan_buf
    wps_use_transfer_2g=0,wps_use_transfer_5g=0
    Has_2g_transfer=0,Has_5g_transfer=0
    rnd_port: 50180
    # This array MUST NOT be flushed until system reboot. #
    ============================start wps configure daemon=========================
    [   53.744204] eth0: 1000Mbps FullDuplex
    [   53.746766] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   53.804061] [WIRED eth0: wan port is up...]
    [   54.001718] ***************************************
    [   54.005560] ath_proc_write_wds_init : wds_status=1
    [   54.191221] ***************************************
    [   54.195032] ath_proc_write_wds_init : wds_status=1
    [   54.217369] isCountryCodeValid: EEPROM regdomain 0x0
    [   54.221399] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
    [   54.228334] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
    [   54.235238] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
    [   54.242080] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
    [   54.248984] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
    [   54.256076] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
    [   54.263355] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
    [   54.270727] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
    [   54.278100] Add VHT80 channel: 5210
    [   54.281568] Add VHT80 channel: 5290
    [   54.285004] Add VHT80 channel: 5530
    [   54.288472] Add VHT80 channel: 5610
    [   54.292002] Skipping VHT80 channel 5660
    [   54.295782] Skipping VHT80 channel 5680
    [   54.299593] Skipping VHT80 channel 5700
    [   54.306529] isCountryCodeValid: EEPROM regdomain 0x0
    [   54.310465] ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
    [   54.317307] ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
    [   54.324117] ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
    [   54.330865] ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
    [   54.337706] ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
    [   54.344923] ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
    [   54.352139] ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
    [   54.359387] ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
    [   54.366822] ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
    [   54.374164] ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
    [   54.381568] ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
    start: wlan_buf.sh...
    create AP
    [   54.524523] ath_ioctl: SIOC80211IFCREATE CALLED
    [   54.528053] Current id = 0
    [   54.530740] end Current id = 0
    [   54.533770] wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9a:
    [   54.542955] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   54.549953] 
    [   54.549953]  BRINGUP:pointer of pvt_wifiposdata is d7f00000 and socket val is dd72bc00 and socket id is 0
    [   54.560887] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   54.569603] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   54.578225] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   54.586910] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:d9c00480
    [   54.595251] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9a) idx(0)
    [   54.602592] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   54.609090] Enabling SG bit for the vap ath1 features 4000 
    [   54.614682] Enabling TSO bit for the vap ath1 features 4000 
    [   54.620618] Enabling LRO bit for the vap ath1 features 4000 
    [   54.625960] VAP device ath1 created osifp: (db623c80) os_if: (d8e38000)
    ath1
    [   54.635332] ath_ioctl: SIOC80211IFCREATE CALLED
    [   54.638831] get Current id = 0
    [   54.641893] end get Current id = 0
    [   54.645235] Current id = 1
    [   54.647922] end Current id = 1
    [   54.651015] wmi_unified_vdev_create_send: ID = 1 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9c:
    [   54.660168] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   54.667104] 
    [   54.667135]  BRINGUP:pointer of pvt_wifiposdata is d8000000 and socket val is dd72bc00 and socket id is 0
    [   54.678100] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   54.686847] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   54.695438] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   54.704123] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:d9c00480
    [   54.712464] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9a) idx(0)
    [   54.719775] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   54.726366] Enabling SG bit for the vap ath2 features 4000 
    [   54.731896] Enabling TSO bit for the vap ath2 features 4000 
    [   54.737519] Enabling LRO bit for the vap ath2 features 4000 
    [   54.743205] VAP device ath2 created osifp: (db626480) os_if: (d8e4c000)
    ath2
    [   54.752233] ath_ioctl: SIOC80211IFCREATE CALLED
    [   54.755732] get Current id = 0
    [   54.758762] end get Current id = 0
    [   54.762168] get Current id = 0
    [   54.765167] end get Current id = 0
    [   54.768572] Current id = 2
    [   54.771290] end Current id = 2
    [   54.774320] wmi_unified_vdev_create_send: ID = 2 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9e:
    [   54.783473] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   54.790502] 
    [   54.790502]  BRINGUP:pointer of pvt_wifiposdata is d8080000 and socket val is dd72bc00 and socket id is 0
    [   54.801405] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   54.810184] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   54.818744] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   54.827460] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:d9c00480
    [   54.835801] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9a) idx(0)
    [   54.843142] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   54.849640] Enabling SG bit for the vap ath21 features 4000 
    [   54.855326] Enabling TSO bit for the vap ath21 features 4000 
    [   54.861043] Enabling LRO bit for the vap ath21 features 4000 
    [   54.866760] VAP device ath21 created osifp: (db624480) os_if: (d8ecc000)
    ath21
    [   54.875913] ath_ioctl: SIOC80211IFCREATE CALLED
    [   54.879412] get Current id = 0
    [   54.882474] end get Current id = 0
    [   54.885816] get Current id = 0
    [   54.888878] end get Current id = 0
    [   54.892283] get Current id = 0
    [   54.895282] end get Current id = 0
    [   54.898687] Current id = 3
    [   54.901405] end Current id = 3
    [   54.904404] wmi_unified_vdev_create_send: ID = 3 Type = 1, Subtype = 0 VAP Addr = 76:03:bd:bc:1d:9a:
    [   54.913620] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   54.920587] 
    [   54.920587]  BRINGUP:pointer of pvt_wifiposdata is d8180000 and socket val is dd72bc00 and socket id is 0
    [   54.931521] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   54.940299] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   54.948859] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   54.957575] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:d9c00480
    [   54.965885] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9a) idx(0)
    [   54.973258] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   54.979756] Enabling SG bit for the vap ath3 features 4000 
    [   54.985348] Enabling TSO bit for the vap ath3 features 4000 
    [   54.990971] Enabling LRO bit for the vap ath3 features 4000 
    [   54.996594] VAP device ath3 created osifp: (db621c80) os_if: (d8ed4000)
    ath3
    [   55.005716] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.009215] get Current id = 0
    [   55.012277] end get Current id = 0
    [   55.015620] get Current id = 0
    [   55.018650] end get Current id = 0
    [   55.022086] get Current id = 0
    [   55.025085] end get Current id = 0
    [   55.028459] get Current id = 0
    [   55.031552] end get Current id = 0
    [   55.034895] Current id = 4
    [   55.037582] end Current id = 4
    [   55.040674] wmi_unified_vdev_create_send: ID = 4 Type = 1, Subtype = 0 VAP Addr = 76:03:bd:bc:1d:9c:
    [   55.049796] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.056825] 
    [   55.056825]  BRINGUP:pointer of pvt_wifiposdata is d8200000 and socket val is dd72bc00 and socket id is 0
    [   55.067760] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.076507] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.085098] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.093783] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:d9c00480
    [   55.102124] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9a) idx(0)
    [   55.109434] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.116026] Enabling SG bit for the vap ath23 features 4000 
    [   55.121649] Enabling TSO bit for the vap ath23 features 4000 
    [   55.127335] Enabling LRO bit for the vap ath23 features 4000 
    [   55.133114] VAP device ath23 created osifp: (d8119480) os_if: (d8114000)
    ath23
    create 5G AP
    [   55.142424] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.146110] Current id = 0
    [   55.148797] end Current id = 0
    [   55.151858] wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9b:
    [   55.161012] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.167978] 
    [   55.167978]  BRINGUP:pointer of pvt_wifiposdata is d8280000 and socket val is dd72bc00 and socket id is 0
    [   55.178975] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.187722] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.196313] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.204998] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:db6c0480
    [   55.213308] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9b) idx(0)
    [   55.220681] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.227179] Enabling SG bit for the vap ath6 features 4000 
    [   55.232771] Enabling TSO bit for the vap ath6 features 4000 
    [   55.238363] Enabling LRO bit for the vap ath6 features 4000 
    [   55.244048] VAP device ath6 created osifp: (d811b480) os_if: (d812c000)
    ath6
    [   55.253077] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.256607] get Current id = 0
    [   55.259606] end get Current id = 0
    [   55.263042] Current id = 1
    [   55.265698] end Current id = 1
    [   55.268728] wmi_unified_vdev_create_send: ID = 1 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9d:
    [   55.277913] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.284910] 
    [   55.284910]  BRINGUP:pointer of pvt_wifiposdata is d7b00000 and socket val is dd72bc00 and socket id is 0
    [   55.295876] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.304623] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.313214] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.321899] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:db6c0480
    [   55.330209] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9b) idx(0)
    [   55.337550] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.344111] Enabling SG bit for the vap ath7 features 4000 
    [   55.349640] Enabling TSO bit for the vap ath7 features 4000 
    [   55.355295] Enabling LRO bit for the vap ath7 features 4000 
    [   55.360949] VAP device ath7 created osifp: (d811d480) os_if: (d8128000)
    ath7
    [   55.369978] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.373508] get Current id = 0
    [   55.376507] end get Current id = 0
    [   55.379881] get Current id = 0
    [   55.382942] end get Current id = 0
    [   55.386316] Current id = 2
    [   55.389003] end Current id = 2
    [   55.392096] wmi_unified_vdev_create_send: ID = 2 Type = 1, Subtype = 0 VAP Addr = 74:03:bd:bc:1d:9f:
    [   55.401249] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.408184] 
    [   55.408184]  BRINGUP:pointer of pvt_wifiposdata is d7b80000 and socket val is dd72bc00 and socket id is 0
    [   55.419181] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.427928] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.436519] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.445204] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:db6c0480
    [   55.453545] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9b) idx(0)
    [   55.460887] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.467416] Enabling SG bit for the vap ath20 features 4000 
    [   55.473070] Enabling TSO bit for the vap ath20 features 4000 
    [   55.478756] Enabling LRO bit for the vap ath20 features 4000 
    [   55.484536] VAP device ath20 created osifp: (d811f480) os_if: (d8140000)
    ath20
    [   55.493720] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.497250] get Current id = 0
    [   55.500281] end get Current id = 0
    [   55.503655] get Current id = 0
    [   55.506685] end get Current id = 0
    [   55.510090] get Current id = 0
    [   55.513089] end get Current id = 0
    [   55.516494] Current id = 3
    [   55.519181] end Current id = 3
    [   55.522243] wmi_unified_vdev_create_send: ID = 3 Type = 1, Subtype = 0 VAP Addr = 76:03:bd:bc:1d:9b:
    [   55.531427] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.538363] 
    [   55.538363]  BRINGUP:pointer of pvt_wifiposdata is d7c00000 and socket val is dd72bc00 and socket id is 0
    [   55.549359] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.558106] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.566697] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.575382] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:db6c0480
    [   55.583692] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9b) idx(0)
    [   55.591065] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.597563] Enabling SG bit for the vap ath8 features 4000 
    [   55.603155] Enabling TSO bit for the vap ath8 features 4000 
    [   55.608747] Enabling LRO bit for the vap ath8 features 4000 
    [   55.614432] VAP device ath8 created osifp: (d8171480) os_if: (d816c000)
    ath8
    [   55.623523] ath_ioctl: SIOC80211IFCREATE CALLED
    [   55.627022] get Current id = 0
    [   55.630084] end get Current id = 0
    [   55.633427] get Current id = 0
    [   55.636457] end get Current id = 0
    [   55.639831] get Current id = 0
    [   55.642924] end get Current id = 0
    [   55.646266] get Current id = 0
    [   55.649297] end get Current id = 0
    [   55.652733] Current id = 4
    [   55.655388] end Current id = 4
    [   55.658419] wmi_unified_vdev_create_send: ID = 4 Type = 1, Subtype = 0 VAP Addr = 76:03:bd:bc:1d:9d:
    [   55.667635] ieee80211_wifipos_vattach: 3824: Wifipos intialization starting
    [   55.674601] 
    [   55.674601]  BRINGUP:pointer of pvt_wifiposdata is d7d00000 and socket val is dd72bc00 and socket id is 0
    [   55.685567] ieee80211_wifipos_vattach: 3876: Wifipos intialization work q & timer alloc complete
    [   55.694314] ieee80211_wifipos_vattach: 3889: Wifipos intialization data store 1 alloc complete
    [   55.702905] ieee80211_wifipos_vattach: 3927: Wifipos intialization data store 2 alloc complete
    [   55.711590] ieee80211_wifipos_vattach: 3939: Wifipos intialization complete with ic:db6c0480
    [   55.719900] ieee80211_wifipos_vattach: 3940: vap addr(74:03:bd:bc:1d:9b) idx(0)
    [   55.727272] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   55.733801] Enabling SG bit for the vap ath22 features 4000 
    [   55.739425] Enabling TSO bit for the vap ath22 features 4000 
    [   55.745173] Enabling LRO bit for the vap ath22 features 4000 
    [   55.750921] VAP device ath22 created osifp: (d8173480) os_if: (d817c000)
    ath22
    Interface doesn't accept private ioctl...
    AMPDU (8BE0): Operation not permitted
    Interface doesn't accept private ioctl...
    AMPDUFrames (8BE0): Operation not permitted
    Interface doesn't accept private ioctl...
    AMPDULim (8BE0): Operation not permitted
    active_list= 1 6
    ath1: basic settings
    ath1: mixed no WIFITEST
    MCAST_RATE : 0
    [   57.349453]  
    [   57.349453]  DES SSID SET=Buffalo-G-1D98 
    [   57.356857] Set freq vap 0 stop send + d8e38000
    [   57.360387] OL vap_stop +
    [   57.362949] wmi_unified_vdev_stop_send for vap 0 (d9be0000)
    [   57.368509] OL vap_stop -
    [   57.368541] STOPPED EVENT for vap 0 (d9be0000)
    [   57.375726] Set freq vap 0 stop send -d8e38000
    [   57.401062] Set wait done --d8e38000
    [   57.403592] Set freq vap 0 stop send + d8e4c000
    [   57.408122] OL vap_stop +
    [   57.410965] wmi_unified_vdev_stop_send for vap 1 (d9be0000)
    [   57.416276] OL vap_stop -
    [   57.418931] STOPPED EVENT for vap 1 (d9be0000)
    [   57.418931] Set freq vap 0 stop send -d8e4c000
    [   57.441049] Set wait done --d8e4c000
    [   57.443580] Set freq vap 0 stop send + d8ecc000
    [   57.448078] OL vap_stop +
    [   57.450734] wmi_unified_vdev_stop_send for vap 2 (d9be0000)
    [   57.456263] OL vap_stop -
    [   57.456294] STOPPED EVENT for vap 2 (d9be0000)
    [   57.463355] Set freq vap 0 stop send -d8ecc000
    [   57.491034] Set wait done --d8ecc000
    [   57.493564] Set freq vap 0 stop send + d8ed4000
    [   57.498063] OL vap_stop +
    [   57.500905] wmi_unified_vdev_stop_send for vap 3 (d9be0000)
    [   57.506216] OL vap_stop -
    [   57.506248] STOPPED EVENT for vap 3 (d9be0000)
    [   57.513558] Set freq vap 0 stop send -d8ed4000
    [   57.541049] Set wait done --d8ed4000
    [   57.543580] Set freq vap 0 stop send + d8114000
    [   57.548078] OL vap_stop +
    [   57.550952] wmi_unified_vdev_stop_send for vap 4 (d9be0000)
    [   57.556263] OL vap_stop -
    [   57.556263] STOPPED EVENT for vap 4 (d9be0000)
    [   57.563573] Set freq vap 0 stop send -d8114000
    [   57.591034] Set wait done --d8114000
    aging_time : 300000
    wlan_buf.sh igmp_snooping
    [   57.689690] ME Pool succesfully initialized vaddr - d7e00000 paddr - 0
    [   57.689690] num_elems = 10424 buf_size - 64 pool_size = 708832
    [   57.701280] Enable MCAST_TO_UCAST
    [   57.785567] ME Pool succesfully initialized vaddr - d7700000 paddr - 0
    [   57.785567] num_elems = 10424 buf_size - 64 pool_size = 708832
    [   57.797219] Enable MCAST_TO_UCAST
    aging_time : 300000
    [   57.853233] Setting Max Stations:63
    ath1: ACL Start....
    ath6: basic settings 5G
    [   58.190315]  
    [   58.190315]  DES SSID SET=Buffalo-A-1D98 
    config channel for ath6 6
    [   58.197532] Set freq vap 0 stop send + d812c000
    [   58.201999] OL vap_stop +
    [   58.204311] wmi_unified_vdev_stop_send for vap 0 (db080000)
    [   58.209871] OL vap_stop -
    [   58.212527] STOPPED EVENT for vap 0 (db080000)
    [   58.212808] Set freq vap 0 stop send -d812c000
    [   58.241112] Set wait done --d812c000
    [   58.243642] Set freq vap 0 stop send + d8128000
    [   58.248172] OL vap_stop +
    [   58.250796] wmi_unified_vdev_stop_send for vap 1 (db080000)
    [   58.256326] OL vap_stop -
    [   58.256357] STOPPED EVENT for vap 1 (db080000)
    [   58.263448] Set freq vap 0 stop send -d8128000
    [   58.291034] Set wait done --d8128000
    [   58.293564] Set freq vap 0 stop send + d8140000
    [   58.298063] OL vap_stop +
    [   58.300905] wmi_unified_vdev_stop_send for vap 2 (db080000)
    [   58.306248] OL vap_stop -
    [   58.306279] STOPPED EVENT for vap 2 (db080000)
    [   58.313558] Set freq vap 0 stop send -d8140000
    [   58.341049] Set wait done --d8140000
    [   58.343580] Set freq vap 0 stop send + d816c000
    [   58.348078] OL vap_stop +
    [   58.350921] wmi_unified_vdev_stop_send for vap 3 (db080000)
    [   58.356232] OL vap_stop -
    [   58.358887] STOPPED EVENT for vap 3 (db080000)
    [   58.358919] Set freq vap 0 stop send -d816c000
    [   58.381037] Set wait done --d816c000
    [   58.383567] Set freq vap 0 stop send + d817c000
    [   58.388066] OL vap_stop +
    [   58.390721] wmi_unified_vdev_stop_send for vap 4 (db080000)
    [   58.396251] OL vap_stop -
    [   58.398875] STOPPED EVENT for vap 4 (db080000)
    [   58.398906] Set freq vap 0 stop send -d817c000
    [   58.421055] Set wait done --d817c000
    aging_time : 300000
    wlan_buf.sh igmp_snooping
    [   58.503998] ol_tx_me_init:Already Enabled!!
    [   58.507122] Enable MCAST_TO_UCAST
    [   58.590690] ol_tx_me_init:Already Enabled!!
    [   58.593845] Enable MCAST_TO_UCAST
    aging_time : 300000
    [   58.650171] Setting Max Stations:63
    ath6: ACL Start....
    ath1: Security 1
    ath1: Start WPS Configuration
    ath6: Security Sec_1_5g
    ath6: Start WPS Configuration
    -----------------------------------------
    [   63.496032] device ath1 entered promiscuous mode
    [   63.501780] device ath6 entered promiscuous mode
    [   63.507403] device ath20 entered promiscuous mode
    [   63.513370] device ath21 entered promiscuous mode
    [   63.519087] device ath22 entered promiscuous mode
    [   63.525273] device ath23 entered promiscuous mode
    aoss_status=0,transfer_enable=0
    Configuration file: /tmp/hostapd/hostapd_ath1.conf
    Line 31: DEPRECATED: 'dump_file' configuration variable is not used anymore
    Configuration file: /tmp/hostapd/hostapd_ath6.conf
    Line 31: DEPRECATED: 'dump_file' configuration variable is not used anymore
    [   63.970071]  ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 
    [   64.010403]  DEVICE IS DOWN ifname=ath1
    [   64.013245]  DEVICE IS DOWN ifname=ath1
    ath1: Could not connect to kernel driver
    Using interface ath1 with hwaddr 74:03:bd:bc:1d:9a and ssid "Buffalo-G-1D98"
    [   64.100312] OL vap_stop +
    [   64.101936] wmi_unified_vdev_stop_send for vap 0 (d9be0000)
    [   64.107497] OL vap_stop -
    [   64.110403] STOPPED EVENT for vap 0 (d9be0000)
    [   64.141424] 8021q: adding VLAN 0 to HW filter on device ath1
    [   64.146110] br0: port 2(ath1) entered forwarding state
    [   64.151202] br0: port 2(ath1) entered forwarding state
    http_server_init
    
    ath1: interface state UNINITIALIZED->ENABLED
    ath1: AP-ENABLED 
    start led_security
    -------------------led_security
    [   64.250078]  ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 
    [   64.280287]  DEVICE IS DOWN ifname=ath6
    [   64.283161]  DEVICE IS DOWN ifname=ath6
    ath6: Could not connect to kernel driver
    Using interface ath6 with hwaddr 74:03:bd:bc:1d:9b and ssid "Buffalo-A-1D98"
    killall: wirelessled: no process killed
    [   64.460418] OL vap_stop +
    [   64.462074] wmi_unified_vdev_stop_send for vap 0 (db080000)
    [   64.467572] OL vap_stop -
    [   64.470509] STOPPED EVENT for vap 0 (db080000)
    [   64.501468] 8021q: adding VLAN 0 to HW filter on device ath6
    [   64.506154] br0: port 3(ath6) entered forwarding state
    [   64.511246] br0: port 3(ath6) entered forwarding state
    ath6: interface state UNINITIALIZED->ENABLED
    ath6: AP-ENABLED 
    [   64.559512] [wifi0] FWLOG: [65656] WAL_DBGID_SECURITY_ENCR_EN (  )
    [   64.564667] [wifi0] FWLOG: [65656] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
    [   64.571602] [wifi0] FWLOG: [65698] WAL channel change freq=5180, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   64.916151] [wifi1] FWLOG: [65291] WAL_DBGID_SECURITY_ENCR_EN (  )
    [   64.921305] [wifi1] FWLOG: [65291] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )
    [   64.928241] [wifi1] FWLOG: [65333] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   64.936988] [wifi1] FWLOG: [65646] WAL channel change freq=2417, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   64.945641] [wifi1] FWLOG: [65959] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1
    IF Enter:
    IF start:
    i=/etc/init.d/S55apc
    Warning! You must input ./wlan_ath.sh [start|stop|restart].
    i=/etc/init.d/S60dbus
    [   65.562636] [wifi0] FWLOG: [66011] WAL channel change freq=5200, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   65.570509] [wifi0] FWLOG: [66324] WAL channel change freq=5220, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   65.579069] [wifi0] FWLOG: [66637] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1
    Unknown group "netdev" in message bus configuration file
    i=/etc/init.d/S60monit
    [   65.919025] [wifi1] FWLOG: [66272] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   65.926804] [wifi1] FWLOG: [66585] WAL channel change freq=2432, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   65.935426] [wifi1] FWLOG: [66898] WAL channel change freq=2437, mode=1 flags=0 rx_ok=1 tx_ok=1
    monit: Cannot translate 'AP7403BDBC1D98' to FQDN name -- Name or service not known
    monit: generated unique Monit id a2db63d5b251d934aaec4c52b44a06ff and stored to '/tmp/.monit.id'
    Starting monit daemon
    i=/etc/init.d/S60samba
    [   66.565885] [wifi0] FWLOG: [66950] WAL channel change freq=5260, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   66.579537] [wifi0] FWLOG: [67262] WAL channel change freq=5280, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   66.587222] [wifi0] FWLOG: [67575] WAL channel change freq=5300, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   66.921836] [wifi1] FWLOG: [67211] WAL channel change freq=2442, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   66.929553] [wifi1] FWLOG: [67523] WAL channel change freq=2447, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   66.938238] [wifi1] FWLOG: [67836] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   66.946985] [wifi1] FWLOG: [68149] WAL channel change freq=2457, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   67.587753] [wifi0] FWLOG: [67888] WAL channel change freq=5320, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   67.595470] [wifi0] FWLOG: [68201] WAL channel change freq=5500, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   67.604373] [wifi0] FWLOG: [68513] WAL channel change freq=5520, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   67.612964] [wifi0] FWLOG: [68827] WAL channel change freq=5540, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   67.924929] [wifi1] FWLOG: [68462] WAL channel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   67.932802] [wifi1] FWLOG: [68775] WAL channel change freq=2467, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   67.941549] [wifi1] FWLOG: [69088] WAL channel change freq=2472, mode=1 flags=0 rx_ok=1 tx_ok=1
    [   68.125210] wmi_unified_vdev_down_send for vap 0 (d9be0000)
    [   68.129865] OL vap_start +
    [   68.132458] wmi_unified_vdev_start_send for vap 0 (d9be0000) 
    [   68.138175] OL vap_start -
    i=/etc/init.d/S61service_start
    $Starting Service: 
    httpaccess.sh stop
    [   68.507935] ol_vdev_start_resp_ev for vap 0 (d9be0000)
    [   68.512058] ol_ath_vap_join: join operation is only for STA/IBSS mode
    [   68.518462] mode=2
    [   68.520524] &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
    [   68.525710] su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 3
    [   68.532739] wmi_unified_vdev_up_send for vap 0 (d9be0000)
    [   68.538113] __ieee80211_smart_ant_init: Smart Antenna is not supported 
    [   68.544704] Notification to UMAC VAP layer
    [   68.590940] [wifi0] FWLOG: [69140] WAL channel change freq=5560, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   68.598625] [wifi0] FWLOG: [69453] WAL channel change freq=5580, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   68.608778] [wifi0] FWLOG: [69766] WAL channel change freq=5600, mode=0 flags=0 rx_ok=1 tx_ok=1
    httpaccess.sh start
    httpd server started at port 80
    httpd server (ssl support) started at port 443
    listen_fd = -1, listen_fd6 = -1
    Can't setup the httpd server
    [   68.927741] [wifi1] FWLOG: [69406] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
    [   68.933208] [wifi1] FWLOG: [69406] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
    [   68.939737] [wifi1] run pre_upnp.sh ...FWLOG: [69414] vap-0 VDEV_MGR_VDEV_START ( 0x985, 0x2, 0x0, 0x0 )
    [   68.962074] [wifi1] FWLOG: [69414] WAL channel change freq=2437, mode=5 flags=0 rx_ok=1 tx_ok=1
    
    [   68.980037] [wifi1] FWLOG: [69823] VDEV_MGR_HP_START_TIME ( 0x0, 0x985, 0x1c20001 )
    [   68.986660] [wifi1] FWLOG: [69823] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x1 )
    [   69.001718] [wifi1] FWLOG: [69823] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
    [   69.007778] [wifi1] FWLOG: [69823] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x985, 0x0, 0x0 )
    route: SIOCDELRT: No such process
    $Starting miniigd: 
    
    MiniIGD v1.07 (2017.06.21-06:48+0000).
    
    $Starting mini_upnpd: 
    
    [   69.594126] [wifi0] FWLOG: [70078] WAL channel change freq=5620, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   69.605592] [wifi0] FWLOG: [70391] WAL channel change freq=5640, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   69.620337] [wifi0] FWLOG: [70704] WAL channel change freq=5660, mode=0 flags=0 rx_ok=1 tx_ok=1
    $Shutting down dnsmasq: 
    disable_ipv4_dns
    cat: can't open '/var/resolv.conf': No such file or directory
    IPv6_dns = 
    killall: dnsmasq: no process killed
    reload_servers_safe
    
    $Starting dnsmasq: 
    IPv6 DNS Remove...
    disable_ipv6_dns
    IPv4_dns = nameserver 192.168.1.1
    reload_servers_safe
    [   70.325335] wmi_unified_vdev_down_send for vap 0 (db080000)
    [   70.330084] OL vap_start +
    [   70.332552] wmi_unified_vdev_start_send for vap 0 (db080000) 
    [   70.338300] OL vap_start -
    IPv6 DNS Adding...
    reload_servers_safe
    
    [   70.644361] ol_vdev_start_resp_ev for vap 0 (db080000)
    [   70.648453] ol_ath_vap_join: join operation is only for STA/IBSS mode
    [   70.654920] mode=1
    [   70.656888] ol_if_dfs_configure: called
    [   70.660699] ol_if_dfs_configure: MKK4 domain
    [   70.664948] ol_if_dfs_disable: called
    [   70.668634] ol_if_dfs_enable: called
    [   70.672227] ieee80211_dfs_send_dfs_wait[285] VAP chan mismatch vap 5180 ic 5500
    [   70.679443] ieee80211_dfs_send_dfs_wait[285] VAP chan mismatch vap 5180 ic 5500
    [   70.686754] ieee80211_dfs_send_dfs_wait[285] VAP chan mismatch vap 5180 ic 5500
    [   70.694033] ieee80211_dfs_send_dfs_wait[285] VAP chan mismatch vap 5180 ic 5500
    [   70.701343] cac_start chan 5500 timeout 62 sec, curr time: 4294737 sec
    [   70.707841] Notification to UMAC VAP layer
    [   70.711933] [wifi0] FWLOG: [71017] WAL channel change freq=5680, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   70.722149] [wifi0] FWLOG: [71330] WAL channel change freq=5700, mode=0 flags=0 rx_ok=1 tx_ok=1
    [   70.729834] [wifi0] FWLOG: [71648] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
    [   70.736301] [wifi0] FWLOG: [71648] RESMGR_OCS_GEN_PERIODIC_NOA ( 0x0 )
    [   70.744204] [wifi0] FWLOG: [71656] vap-0 VDEV_MGR_VDEV_START ( 0x157c, 0x2, 0x0, 0x1 )
    [   70.752639] [wifi0] FWLOG: [71656] WAL channel change freq=5500, mode=10 flags=0 rx_ok=1 tx_ok=1
    $Starting udhcpd: 
    
    
     Static routes setting:
    cat: can't open '/tmp/NTP_connect': No such file or directory
    Info: make_crontab_wan_link_check !!!!!!!!!!!!!!!!!!
    stop crond !!
    killall: crond: no process killed
    start crond !! conf_dir: /tmp/etc/crontabs
    Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
    iptables: No chain/target/match by that name.
    Shutting down VPN: iptables: Bad rule (does a matching rule exist in that chain?).
    iptables: Bad rule (does a matching rule exist in that chain?).
    iptables: No chain/target/match by that name.
    
    ls: /tmp/ppp/conn_list: No such file or directory
    Received SIG_CLEAN_VPN_TABLE
    The attached devices demo is Running ...
    
    $Starting /usr/sbin/lld2d: 
    
    flash:: open /proc/lan_port_reserved_table failed
    run NTP client wan no ip.
    $Shutting down ntpclient: 
    killall: ntpclient: no process killed
    
    $Starting ntpclient: 
    ntpclient -d -z 25 -x 0 -h ntp.jst.mfeed.ad.jp -i 600 -m 2400 -p 123 -s 2 -t 86400
    
    
    i=/etc/init.d/S70qca-nss-drv
    Configuration:
      -c probe_count       1
      -d (debug)           1
      -h hostname          ntp.jst.mfeed.ad.jp
      -b second hostname   ntp.jst.mfeed.ad.jp
      -i interval(min)     600
      -m interval(max)     2400
      -p local_port        123
      -s set_clock         1
      -t update interval   86400
    NTP no check Wan.
    [   72.744642] Enabling NSS RPS
    i=/etc/init.d/S70qca-nss-ecm
    Configuration:
      Probe count          1
      Debug                1
      NTP server           ntp.jst.mfeed.ad.jp
      Interval             600
      Local port           123
      Set clock            1
    ntp.jst.mfeed.ad.jp: Unknown host
    net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1
    
     SSDK Init OK!
    operate done.
    
    
     SSDK Init OK!
    operate done.
    
    /dev/mem opened.
    Memory mapped at address 0x40185000.
    Value at address 0x37200018 (0x40185018): 0x0
    Written 0x7; readback 0x7
    /dev/mem opened.
    Memory mapped at address 0x40234000.
    Value at address 0x37400018 (0x40234018): 0x0
    Written 0x7; readback 0x7
    wps_use_transfer_2g=0,wps_use_transfer_5g=0
    wps_use_transfer_2g=0,wps_use_transfer_5g=0
    Has_2g_transfer=0,Has_5g_transfer=0
    ######## load_ecm - add bullalo flow controll patched done! ########
    i=/etc/init.d/S95done
    Has_2g_transfer=0,Has_5g_transfer=0
    i=/etc/init.d/S96led
    i=/etc/init.d/S97watchdog
    i=/etc/init.d/S98rngd
    i=/etc/init.d/S98sysntpd
    MCAST_RATE : 0
    service: file '/usr/sbin/ntpd' is not executable
    i=/etc/init.d/S99commit_sysupgrade
    MCAST_RATE_5g : 0
    MCAST_RATE : 0
    i=/etc/init.d/S99powerctl
    adjust wmm 1,VAP2_ENABLE=1
    MCAST_RATE_5g : 0
    /etc/rc.common: eval: line 1: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_any_cpu_load: nonexistent directory
    /etc/rc.common: eval: line 1: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core: nonexistent directory
    /etc/rc.common: eval: line 1: can't create /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq: nonexistent directory
    /etc/rc.common: eval: line 1: can't create /sys/devices/system/cpu/cpufreq/ondemand/sync_freq: nonexistent directory
    i=/etc/init.d/S99sysctl
    ath1: WMM....
    adjust wmm 6,VAP6_ENABLE=1
    ath6: WMM 5G....
    i=/etc/init.d/S99sysstat
    i=/etc/init.d/S99thermal
    i=/etc/init.d/S99uenable_ipforward
    i=/etc/init.d/S99zbootup_end
    [   73.786223] msm_thermal: Max frequency reset for cpu0
    [   73.790346] msm_thermal: Max frequency reset for cpu1
    [   73.795251] msm_thermal: enabled = 0
    called with DEVPATH=/devices/platform/ipq-dwc3.0/dwc3.0/xhci-hcd.0/usb1, INTERFACE=
    called with DEVPATH=/devices/platform/ipq-dwc3.0/dwc3.0/xhci-hcd.0/usb2, INTERFACE=
    $Starting PPPoE Pass Through: 
    mcproxy start:
    called with DEVPATH=/devices/platform/ipq-dwc3.1/dwc3.1/xhci-hcd.1/usb3, INTERFACE=
    called with DEVPATH=/devices/platform/ipq-dwc3.1/dwc3.1/xhci-hcd.1/usb4, INTERFACE=
    Monitor.sh starting.......
    called with DEVPATH=/devices/platform/ipq-dwc3.1/dwc3.1/xhci-hcd.1/usb3/3-0:1.0, INTERFACE=9/0/0
    
    called with DEVPATH=/devices/platform/ipq-dwc3.1/dwc3.1/xhci-hcd.1/usb4/4-0:1.0, INTERFACE=9/0/0
    failed to add interface
    called with DEVPATH=/devices/platform/ipq-dwc3.0/dwc3.0/xhci-hcd.0/usb1/1-0:1.0, INTERFACE=9/0/0
    called with DEVPATH=/devices/platform/ipq-dwc3.0/dwc3.0/xhci-hcd.0/usb2/2-0:1.0, INTERFACE=9/0/0
    cat: can't open '/tmp/boot_flag': No such file or directory
    ************* AUTO WP MODE ****************
    cat: can't open '/tmp/fw_upgrade_running': No such file or directory
    cat: can't open '/var/inet_start_wan_type': No such file or directory
    ##################detwan start################
    stop aoss while detwan
    cat: can't open '/tmp/easy_dns_result': No such file or directory
    Ready to get wan0_ipaddr --------------------------------------
    Get wan0_ipaddr=192.168.1.4 --------------------------------------
    wan link status=1 ---------------------------------------
    dns_lookup: dest.sin_addr.s_addr=192.168.1.1  -------------------------------
    dns_lookup: WAN_IFNAME=eth0  -------------------------------
    wps_use_transfer_2g=0,wps_use_transfer_5g=0
    Has_2g_transfer=0,Has_5g_transfer=0
    Kill aoss in switch mode 
    $Shutting down udhcpd: 
    sh: can't kill pid 3917: No such process
    
    killall: aoss: no process killed
    iptables: No chain/target/match by that name.
    bridge br101 does not exist!
    bridge br101 does not exist!
    ifconfig: SIOCGIFFLAGS: No such device
    bridge br101 doesn't exist; can't delete it
    aoss_restore enter
    aoss_restore end
    -------------------led_security
    killall: wirelessled: no process killed
    
    rm: can't remove '/tmp/run_security_bt': No such file or directory
    rm: can't remove '/tmp/transfer_no_flag': No such file or directory
    detwan start 1.3
    @o@ Inet_start :: status[9999] ---------------------------
    [   76.678537] device eth0 entered promiscuous mode
    cat: can't open '/tmp/easy_dns_result': No such file or directory
    Ready to get wan0_ipaddr --------------------------------------
    Get wan0_ipaddr=192.168.1.4 --------------------------------------
    wan link status=1 ---------------------------------------
    dns_lookup: WAN_IFNAME=eth0  -------------------------------
    DHCP found in wan...............................
    udhcpc (v1.19.4) started
    deconfig
    interface=eth0
    dns_lookup: WAN_IFNAME=eth0  -------------------------------
    Sending discover...
    wps_use_transfer_2g=0,wps_use_transfer_5g=0
    Has_2g_transfer=0,Has_5g_transfer=0
    192.168.11.1/255.255.255.0
    192.168.1.4/255.255.255.0
    192.168.11.1/255.255.255.0
    192.168.1.1/255.255.255.0
    Sending select for 192.168.1.4...
    192.168.11.1/255.255.255.0
    192.168.1.4/255.255.255.0
    192.168.11.1/255.255.255.0
    192.168.1.1/255.255.255.0
    Lease of 192.168.1.4 obtained, lease time 14400
    
    Please press Enter to activate this console. bound
    
    
    route: SIOCDELRT: No such process
    cat: can't open '/tmp/sroute': No such file or directory
    dns_lookup: dest.sin_addr.s_addr=192.168.1.1  -------------------------------
    dns_lookup: WAN_IFNAME=eth0  -------------------------------
    
    ==> Waiting........timeout!!
    
    ==> Waiting........timeout!!
    [   83.770165] device eth0 left promiscuous mode
    if_mac:307 enter 
    if_mac:316 mac 74:03:bd:bc:1d:98
    if_mac:318 str is 74:03:bd:bc:1d:98
    if_mac:320 end
    detwan_main:1379 lan detection 
    DHCP didn't found in lan...............................
    @@@@@@@@@@@@@@wanmode=10020
    No mode change ...
    $Starting WAN: wan_start
    cat: can't open '/tmp/inet_start_progress': No such file or directory
    Inet start: start
    @o@ Inet_start :: status[9999] ---------------------------
    cat: can't open '/tmp/NTP_connect': No such file or directory
    stop crond !!
    set IPv6 ...
    Ready to get wan0_ipaddr --------------------------------------
    Get wan0_ipaddr= --------------------------------------
    wan link status=1 ---------------------------------------
    
    
    
    
    
    $Shutting WAN: v4 
    $Shutting down ntpclient: 
    
    
    
    iptables: No chain/target/match by that name.
    iptables: No chain/target/match by that name.
    [   90.780099] ADDRCONF(NETDEV_UP): ip6tnl0: link is not ready
    [   90.784661] ADDRCONF(NETDEV_UP): sit0: link is not ready
    [   90.790065] ADDRCONF(NETDEV_UP): gre0: link is not ready
    [   90.795345] ADDRCONF(NETDEV_UP): bond0: link is not ready
    [   90.808591] ADDRCONF(NETDEV_UP): ath2: link is not ready
    [   90.817275] ADDRCONF(NETDEV_UP): ath21: link is not ready
    [   90.821711] ADDRCONF(NETDEV_UP): ath3: link is not ready
    [   90.826991] ADDRCONF(NETDEV_UP): ath23: link is not ready
    [   90.832458] ADDRCONF(NETDEV_UP): ath7: link is not ready
    [   90.837675] ADDRCONF(NETDEV_UP): ath20: link is not ready
    [   90.843080] ADDRCONF(NETDEV_UP): ath8: link is not ready
    [   90.848453] ADDRCONF(NETDEV_UP): ath22: link is not ready
    
    $Shutting down pppd: 
    $Shutting down dnsmasq: 
    disable_ipv4_dns
    IPv6_dns = nameserver 240b:12:500:6500:21f:67ff:feea:52c0
    reload_servers_safe
    
    $Shutting down pppd: 
    
    killall: pppd: no process killed
    killall: pppd: no process killed
    
    
    
    
    
    
    $Shutting down pppd: 
    detwan_ipv6_main....
    ipv6_RA_Detection trial 0
    
    ipv6_wait_RA_offer
    select
    r=1
    ipv6_verify_RA_packet 134
            AdvManagedFlag off;
            AdvOtherConfigFlag on;
    "Router Advertisement" Router address fe80:0000:0000:0000:021f:67ff:feea:52c0
    "Router Advertisement" Prefix information 240b:0012:0500:6500::/64
    "Router Advertisement" Prefix length 64
    Stop DHCPv6 Client ...
    killall: dhcp6c: no process killed
    dhcp6c type=auto
    Start DHCPv6 Client ...
    start DHCP6c
    ipv6_type=auto
    WAN IPv6 Detecting...
    ###################STAT=Detecting...
    
    
    ######policy stop
    
    Stop DS-Lite Tunnel ...
    rm: can't remove '/tmp/AFTR_test_res': No such file or directory
    Cannot find device "tun0"
    delete tunnel tun0 failed: No such device
    
    Stop DS-Lite Tunnel done...
    Stop MAP E ...
    /etc/init.d/ipv6_mape.sh: line 227: can't create /tmp/ipv6_mape/mape_status: nonexistent directory
    killall: v6plus_client: no process killed
    killall: mon_mape.sh: no process killed
    killall: 2: no process killed
    WAN_IP= 240b:0012:0500:6500:7603:bdff:febc:1d99 by RA
    RA Detection return:05
    killall: ez-ipupdate: no process killed
    killall: updatednsip: no process killed
    killall: updatednsip: no process killed
    killall: ddnsc: no process killed
    killall: ddnscd: no process killed
    
    [   98.604779] device eth0 entered promiscuous mode
    Inet start: DHCPD check
    DNS_change check
    not changed
    ipv6_dns get==============================
    wan proto is easy. easy wan mode is dhcp ==============================
    open port for SIP, RTP
    set_global_ip======================
    [   99.180287] device eth0 left promiscuous mode
    inet_start_main: DHCP found in wan ---------------------
    udhcpc (v1.19.4) started
    deconfig
    interface=eth0
    
    
    
    Stop RADVD ...
    Start RADVD ...
    PRE_LAN_IPV6=240b:0012:0500:65c0:
    ip= 240b:12:500:6500:7603:bdff:febc:1d99 , dns = 240b:12:500:6500:21f:67ff:feea:52c0
    ===============STAT=got PD
    IPv6 Auto, done
    IAPD_lease_change check
    Reload DHCPv6 Server config ...
    Sending discover...
    192.168.11.1/255.255.255.0
    192.168.1.4/255.255.255.0
    192.168.11.1/255.255.255.0
    192.168.1.1/255.255.255.0
    Sending select for 192.168.1.4...
    192.168.11.1/255.255.255.0
    192.168.1.4/255.255.255.0
    192.168.11.1/255.255.255.0
    192.168.1.1/255.255.255.0
    Lease of 192.168.1.4 obtained, lease time 14400
    bound
    
    
    route: SIOCDELRT: No such process
    cat: can't open '/tmp/sroute': No such file or directory
    dns_lookup: dest.sin_addr.s_addr=192.168.1.1  -------------------------------
    dns_lookup: WAN_IFNAME=eth0  -------------------------------
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
      0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
    @o@ Inet_start :: status[10001] ---------------------------
    run ipv6_filter.sh
    open port for SIP, RTP
    no mcproxy found; none killed
    no mcproxy found; none killed
    mcproxy start:
    set ipv6_global_ip in ipv6_start_up.sh
    LAN_IP6_GADDR = 240b:12:500:65c0:7603:bdff:febc:1d98
    Stop DHCPv6 Server ...
    Start DHCPv6 Server ...
    Stop RADVD ...
    Start RADVD ...
    PRE_LAN_IPV6=240b:0012:0500:65c0:
    IPv6 init finish!!
    Killed
    ================inet_start_main :2182 success get dhcp and leave!!!!!!!===========
    
    ##################detwan end################
    

  • firmware update log
    Killed
    Monitor.sh starting.......
    Start of fw_blink_cnt.sh -------------------------------------------------
    End of fw_blink_cnt.sh -------------------------------------------------
    do ubi firmware upgrade ...
    [  438.272789] UBI: attaching mtd1 to ubi1
    [  438.275570] UBI: physical eraseblock size:   131072 bytes (128 KiB)
    [  438.282161] UBI: logical eraseblock size:    126976 bytes
    [  438.287191] UBI: smallest flash I/O unit:    2048
    [  438.291940] UBI: VID header offset:          2048 (aligned 2048)
    [  438.297938] UBI: data offset:                4096
    [  438.887691] UBI: empty MTD device detected
    [  438.890815] UBI: max. sequence number:       0
    [  438.895220] UBI: create volume table (copy #1)
    [  438.912652] UBI: create volume table (copy #2)
    [  438.930677] UBI: attached mtd1 to ubi1
    [  438.933395] UBI: MTD device name:            "rootfs_1"
    [  438.938612] UBI: MTD device size:            64 MiB
    [  438.947735] UBI: number of good PEBs:        512
    [  438.951358] UBI: number of bad PEBs:         0
    [  438.955732] UBI: number of corrupted PEBs:   0
    [  438.960199] UBI: max. allowed volumes:       128
    [  438.964792] UBI: wear-leveling threshold:    4096
    [  438.969634] UBI: number of internal volumes: 1
    [  438.973883] UBI: number of user volumes:     0
    [  438.978288] UBI: available PEBs:             503
    [  438.983286] UBI: total number of reserved PEBs: 9
    [  438.987628] UBI: number of PEBs reserved for bad PEB handling: 5
    [  438.993845] UBI: max/mean erase counter: 0/0
    [  438.997844] UBI: image sequence number:  -436053912
    [  439.003248] UBI: background thread "ubi_bgt1d" started, PID 7064
    ubiupdatevol /dev/ubi1_0 /tmp/uhttp-upgrade.img -o 128 -s 1826816
    ubiupdatevol /dev/ubi1_1 /tmp/uhttp-upgrade.img -o 1826944 -s 15230253
    $Shutting down pppd: 
    disable_ipv4_dns
    IPv6_dns = 
    reload_servers_safe
    ######policy stop
    Stop DS-Lite Tunnel ...
    Stop DS-Lite Tunnel done...
    Stop MAP E ...
    Stop DS-Lite Tunnel ...
    Stop DS-Lite Tunnel done...
    Stop MAP E ...
    Stop RADVD ...
    [  473.693345] Restarting system.
    [  473.695407] Going down for restart now
    

広告