タグ: WRC-X3200GST3

WRC-X3200GST3 stock -> OpenWrt（non-UBI）

RootFSにUBIを使用しない構成の場合

[ 2528.639914] IDPfw: Exit IDPfw
[ 2528.643092] mod epilog takes 0 jiffies
[ 2528.646865] IDPfw: Exit IDPfw
[ 2528.667556] Exit chrdev /dev/idpfw with major 191
[ 2528.695567] Exit chrdev /dev/detector with major 190
XXX Begin firmware upgrade..., size(8519775)
dump: [4D 54 37 36 32 32 5F 45 4C 45 43 4F 4D 5F 57 52 43 2D 58 33 32 30 30 47 53 54 33 ]
check_hw_id_from_last_len = 27
image hw id [MT7622_ELECOM_WRC-X3200GST3]
sys_fw_hwid [MT7622_ELECOM_WRC-X3200GST3]
dump: [4D 54 37 36 32 32 5F 45 4C 45 43 4F 4D 5F 57 52 43 2D 58 33 32 30 30 47 53 54 33 ]
XX /sbin/sysupgrade_md5.sh 8519684 /tmp/filecIssN2 XX
Done, reboot now
upgrade_allow: TRUE
allow upgrade, return count_down.html page.
XXXXXX update_firmware 375: return count_down.html
XXX sysupgrade_new -c /tmp/fw.bin 1>/dev/null XXX
[ 2535.161037] no net device found for eth0 or
[ 2535.167236] no net device found for ra1 or apcli0
[ 2535.176785] no net device found for ra2 or apcli0
[ 2535.194696] Set_HotSpot_OnOff ==> wdev[0] is already in [OFF] STATE , skip.
[ 2535.217980] no net device found for ra3 or apcli0
[ 2535.227106] no net device found for ra4 or apcli0
[ 2535.236063] no net device found for ra5 or apcli0
[ 2535.241637] no net device found for ra6 or apcli0
[ 2535.246772] no net device found for ra7 or apcli0
[ 2535.251605] no net device found for ra8 or apcli0
[ 2535.256330] no net device found for ra9 or apcli0
[ 2535.261042] no net device found for ra10 or apcli0
[ 2535.265845] no net device found for ra11 or apcli0
[ 2535.270642] no net device found for ra12 or apcli0
[ 2535.275441] no net device found for ra13 or apcli0
[ 2535.280244] no net device found for ra14 or apcli0
[ 2535.285044] no net device found for ra15 or apcli0
[ 2535.289895] no net device found for rai1 or apclii0
[ 2535.294781] no net device found for rai2 or apclii0
[ 2535.299662] no net device found for rai3 or apclii0
[ 2535.304550] no net device found for rai4 or apclii0
[ 2535.309435] no net device found for rai5 or apclii0
[ 2535.314320] no net device found for rai6 or apclii0
[ 2535.319210] no net device found for rai7 or apclii0
[ 2535.324136] no net device found for rai8 or apclii0
[ 2535.329029] no net device found for rai9 or apclii0
[ 2535.333915] no net device found for rai10 or apclii0
[ 2535.338886] no net device found for rai11 or apclii0
[ 2535.343859] no net device found for rai12 or apclii0
[ 2535.348829] no net device found for rai13 or apclii0
[ 2535.353802] no net device found for rai14 or apclii0
[ 2535.358773] no net device found for rai15 or apclii0
[ 2535.363746] no net device found for rax0 or apclix0
[ 2535.368632] no net device found for rax1 or apclix0
[ 2535.373518] no net device found for rax2 or apclix0
[ 2535.378400] no net device found for rax3 or apclix0
[ 2535.383286] no net device found for rax4 or apclix0
[ 2535.388166] no net device found for rax5 or apclix0
[ 2535.393102] no net device found for rax6 or apclix0
[ 2535.397989] no net device found for rax7 or apclix0
[ 2535.402868] no net device found for rax8 or apclix0
[ 2535.407754] no net device found for rax9 or apclix0
[ 2535.412633] no net device found for rax10 or apclix0
[ 2535.417606] no net device found for rax11 or apclix0
[ 2535.422573] no net device found for rax12 or apclix0
[ 2535.427546] no net device found for rax13 or apclix0
[ 2535.432515] no net device found for rax14 or apclix0
[ 2535.437486] no net device found for rax15 or apclix0
[ 2535.442454] no net device found for wlan0 or wlan-apcli0
[ 2535.447781] no net device found for apclix0
[ 2535.451967] no net device found for wlan-apcli0
Please press Enter to activate this console.
Please press Enter to activate this console.
dnsmasq
dnsmasq [br-lan]
[ 2540.391356] br-lan: port 1(eth0) entered disabled state
[ 2540.400019] device eth0 left promiscuous mode
[ 2540.406957] br-lan: port 1(eth0) entered disabled state
[ 2540.415424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2540.434125] br-lan: port 3(rai0) entered disabled state
[ 2540.439438] br-lan: port 2(ra0) entered disabled state
[ 2540.446851] device rai0 left promiscuous mode
[ 2540.451497] br-lan: port 3(rai0) entered disabled state
[ 2540.457019] device ra0 left promiscuous mode
[ 2540.461385] br-lan: port 2(ra0) entered disabled state
[ 2540.496031] mtk_soc_eth 1b100000.ethernet eth0: RX flow is programmed, LRO should keep on
[ 2540.504820] device eth0 entered promiscuous mode
[ 2540.515667] br-lan: port 1(eth0) entered forwarding state
[ 2540.521134] br-lan: port 1(eth0) entered forwarding state
[ 2540.796486] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gdm1_to_gmac1_esw updated = 1
[ 2540.809031] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[ 2540.829058] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[ 2540.845738] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 1
[ 2540.859046] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[ 2540.873916] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gdm1_to_gmac1_esw updated = 0
[ 2540.887211] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[ 2540.902179] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[ 2540.911766] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 0
[ 2540.922566] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[ 2541.175432] Device Instance
[ 2541.178945]  WDEV 00:, Name:ra0, Wdev(list) Idx:0
[ 2541.184506]           Idx:9
[ 2541.186699] extif_put_dev(ra0)
[ 2541.190621] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 2541.198065]
[ 2541.200040]
[ 2541.201877]
[ 2541.203569]
[ 2541.205475]
[ 2541.207009]
[ 2541.209009]
[ 2541.210498]
[ 2541.211982]
[ 2541.213538]
[ 2541.215024]
[ 2541.218859]
[ 2541.220354]
[ 2541.221882]
[ 2541.223370]
[ 2541.300859] ra0: ===> main_virtual_if_close
[ 2541.306168] wifi_sys_linkdown(), wdev idx = 0
[ 2541.331960] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
[ 2541.380650] wifi_sys_close(), wdev idx = 0
[ 2541.387640] APStop(), oper(0) bssid(0)=04:ab:18:xx:xx:79
[ 2541.395334] wifi_sys_close(), wdev idx = 0
[ 2541.400316] ap_ftkd> Release FT KDP Module...
[ 2541.405500] <=== APStop()
[ 2541.417180] CmdReStartDLRsp: WiFI FW Download Success
[ 2541.423467] cut_through_token_list_destroy(): ffffffc01e3b3310,ffffffc01e3b3310
[ 2541.433522] cut_through_token_list_destroy(): ffffffc01e3b3330,ffffffc01e3b3330
[ 2541.750834] RTMP_AllTimerListRelease: Size=33
[ 2541.755200] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae66200!
[ 2541.762093] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.774441] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae66260!
[ 2541.781288] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.793632] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae6ee88!
[ 2541.800460] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.812887] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae6eee8!
[ 2541.819725] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.832072] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae77b10!
[ 2541.838900] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.851245] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae77b70!
[ 2541.858070] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.870414] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae80798!
[ 2541.877256] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.889604] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae807f8!
[ 2541.896429] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.908780] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae89420!
[ 2541.915669] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.928022] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae89480!
[ 2541.934863] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.947214] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae920a8!
[ 2541.954033] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.966382] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae92108!
[ 2541.973200] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2541.985553] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae9ad30!
[ 2541.992379] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.004729] RTMP_AllTimerListRelease: Cancel timer obj ffffff800ae9ad90!
[ 2542.011558] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.024012] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea39b8!
[ 2542.030921] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.043272] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aea3a18!
[ 2542.050099] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.062449] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeac640!
[ 2542.069269] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.081619] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeac6a0!
[ 2542.088436] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.100794] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeb52c8!
[ 2542.107613] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.119962] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aeb5328!
[ 2542.126831] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.139180] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aebdf50!
[ 2542.146002] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.158356] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aebdfb0!
[ 2542.165220] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.177572] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aec6bd8!
[ 2542.184402] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.196756] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aec6c38!
[ 2542.203588] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.215936] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aecf860!
[ 2542.222762] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.235150] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aecf8c0!
[ 2542.241979] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x70/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.254323] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aed84e8!
[ 2542.261146] RTMP_AllTimerListRelease: Timer is allocated by RRM_CfgInit+0x58/0x128 [mt7622_mt_wifi],Valid:1,Lock:ffffff800b2ef600,State:0
[ 2542.273494] RTMP_AllTimerListRelease: Cancel timer obj ffffff800aed8548!

F0: 102B 0000
F6: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 0000 0041 [0000]
G0: 0190 0000
T0: 0000 0369 [000F]
Jump to BL

UNIVPLL_CON0 = 0xFE000000!!!
mt_pll_init: Set pll frequency for 25M crystal
RAM_CONSOLE preloader last status: 0x0 0x0 0x0 0x0 0x0 0x0
[PMIC_WRAP]wrap_init pass,the return value=0.
[pmic_init] Preloader Start..................
[pmic_init] MT6380 CHIP Code, reg_val = 0, 1:E2  0:E3
[pmic_init] Done...................
Chip part number:7622B
MT7622 Version: 1.2.8, (iPA)
SSC OFF
mt_pll_post_init: mt_get_cpu_freq = 1350000Khz
mt_pll_post_init: mt_get_mem_freq = 1600000Khz
mt_pll_post_init: mt_get_bus_freq = 1119920Khz
[PLFM] Init I2C: OK(0)

[BLDR] Build Time: 20200518-110732
==== Dump RGU Reg ========
RGU MODE:     14
RGU LENGTH:   FFE0
RGU STA:      40000000
RGU INTERVAL: FFF
RGU SWSYSRST: 8000
==== Dump RGU Reg End ====
RGU: g_rgu_satus:2
mtk_wdt_mode_config  mode value=10, tmp:22000010
PL RGU RST: ??
SW reset with bypass power key flag
Find bypass powerkey flag
WDT NONRST=0x20000000
WDT IRQ_EN=0x300002
RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
[EMI] MDL number = 2
[EMI] DRAMC calibration start

[EMI] DRAMC calibration end

[EMI]rank size auto detect
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x48000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x50000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0xEDCBA987, test_addr[0x60000000]= 0xEDCBA987
[EMI]rank0 size: 0x20000000
[MEM] complex R/W mem test pass
RAM_CONSOLE wdt status (0x2)=0x2
[BBT] BMT.v2 is found at 0x3FF
[PLFM] Init Boot Device: OK(0)

NAND read: device 0 offset 0x2c0000, size 0x2000
8192 bytes read: OK
[do_read_image_blks] This is a FIT image,img_size = 0x39e920
[do_read_image_blks] img_blks = 0x73e
[do_read_image_blks] img_align_size = 0x39f000

NAND read: device 0 offset 0x2c0000, size 0x39f000
3796992 bytes read: OK
bootm flag=0, states=70f
## Loading kernel from FIT Image at 4007ff28 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description:  ARM64 OpenWrt Linux-5.10.75
Type:         Kernel Image
Compression:  lzma compressed
Data Start:   0x40080010
Data Size:    3764262 Bytes = 3.6 MiB
Architecture: AArch64
OS:           Linux
Load Address: 0x44000000
Entry Point:  0x44000000
Hash algo:    crc32
Hash value:   c953efc3
Hash algo:    sha1
Hash value:   add14333f99ffe0d1601f3d11b8817e2c0c13a57
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 4007ff28 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description:  ARM64 OpenWrt elecom_wrc-x3200gst3 device tree blob
Type:         Flat Device Tree
Compression:  uncompressed
Data Start:   0x4041717c
Data Size:    29055 Bytes = 28.4 KiB
Architecture: AArch64
Hash algo:    crc32
Hash value:   447d446b
Hash algo:    sha1
Hash value:   6e08d95ed7635841b7deaa0b12cc233173d49d14
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4041717c
Uncompressing Kernel Image ... OK
Loading Device Tree to 5cf45000, end 5cf4f17e ... OK

Starting kernel ...

[ATF][     7.799388]save kernel info
[ATF][     7.802325]Kernel_EL2
[ATF][     7.804995]Kernel is 64Bit
[ATF][     7.808083]pc=0x44000000, r0=0x5cf45000, r1=0x0
INFO:    BL3-1: Preparing for EL3 exit to normal world, Kernel
INFO:    BL3-1: Next image address = 0x44000000
INFO:    BL3-1: Next image spsr = 0x3c9
[ATF][     7.825781]el3_exit
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.75 (musashino205@TAIHA.NET) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r0+17885-1cf1f6a9e0) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sat Oct 30 07:47:02 2021
[    0.000000] Machine model: ELECOM WRC-X3200GST3
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
[    0.000000]   node   0: [mem 0x0000000043030000-0x000000005fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   DMA zone: 2048 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 131072 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 20 pages/cpu s43800 r8192 d29928 u81920
[    0.000000] pcpu-alloc: s43800 r8192 d29928 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM erratum 843419
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 493800K/524288K available (7870K kernel code, 856K rwdata, 2140K rodata, 448K init, 289K bss, 30488K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
[    0.000000] random: get_random_bytes called from start_kernel+0x340/0x484 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[    0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[    0.008210] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
[    0.018605] pid_max: default: 32768 minimum: 301
[    0.023307] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.030649] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.039366] rcu: Hierarchical SRCU implementation.
[    0.044278] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.052145] smp: Bringing up secondary CPUs ...
[    0.057009] Detected VIPT I-cache on CPU1
[    0.057052] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.057110] smp: Brought up 1 node, 2 CPUs
[    0.071785] SMP: Total of 2 processors activated.
[    0.076501] CPU features: detected: 32-bit EL0 Support
[    0.081657] CPU features: detected: CRC32 instructions
[    0.086904] CPU: All CPU(s) started at EL2
[    0.091015] alternatives: patching kernel code
[    0.098665] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.108559] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.115453] pinctrl core: initialized pinctrl subsystem
[    0.121132] NET: Registered protocol family 16
[    0.126216] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.133341] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.141129] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.149411] thermal_sys: Registered thermal governor 'fair_share'
[    0.149414] thermal_sys: Registered thermal governor 'bang_bang'
[    0.155528] thermal_sys: Registered thermal governor 'step_wise'
[    0.161573] thermal_sys: Registered thermal governor 'user_space'
[    0.167837] ASID allocator initialised with 65536 entries
[    0.179980] pstore: Registered ramoops as persistent store backend
[    0.186195] ramoops: using 0x10000@0x42ff0000, ecc: 0
[    0.217166] SCSI subsystem initialized
[    0.221035] libata version 3.00 loaded.
[    0.225028] usbcore: registered new interface driver usbfs
[    0.230590] usbcore: registered new interface driver hub
[    0.235939] usbcore: registered new device driver usb
[    0.242701] clocksource: Switched to clocksource arch_sys_counter
[    0.249485] NET: Registered protocol family 2
[    0.253980] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.261569] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.269968] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.277773] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.284988] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291427] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.298001] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.305072] NET: Registered protocol family 1
[    0.309456] PCI: CLS 0 bytes, default 64
[    0.314348] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.323345] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.329201] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.375749] mt-pmic-pwrap 10001000.pwrap: unexpected interrupt int=0x1
[    0.390134] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.397216] printk: console [ttyS0] disabled
[    0.401557] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 21, base_baud = 1562500) is a 16550A
[    0.410539] printk: console [ttyS0] enabled
[    0.410539] printk: console [ttyS0] enabled
[    0.418907] printk: bootconsole [uart8250] disabled
[    0.418907] printk: bootconsole [uart8250] disabled
[    0.429453] mtk_rng 1020f000.rng: registered RNG driver
[    0.432858] random: fast init done
[    0.438211] random: crng init done
[    0.442405] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.450707] loop: module loaded
[    0.454678] mtk-snand 1100d000.snfi: chip is W25N01GV, size 128MB, page size 2048, oob size 64
[    0.464580] [BBT] BMT.v2 is found at 0x3ff
[    0.468848] 10 fixed-partitions partitions found on MTD device 1100d000.snfi
[    0.475896] Creating 10 MTD partitions on "1100d000.snfi":
[    0.481374] 0x000000000000-0x000000080000 : "Preloader"
[    0.487429] 0x000000080000-0x0000000c0000 : "ATF"
[    0.492609] 0x0000000c0000-0x000000140000 : "u-boot"
[    0.498300] 0x000000140000-0x0000001c0000 : "u-boot-env"
[    0.504336] 0x0000001c0000-0x0000002c0000 : "factory"
[    0.510611] 0x0000002c0000-0x000001bc0000 : "firmware"
[    0.541038] 2 fit-fw partitions found on MTD device firmware
[    0.546697] Creating 2 MTD partitions on "firmware":
[    0.551653] 0x000000000000-0x0000003a0000 : "kernel"
[    0.560417] 0x0000003a0000-0x000001900000 : "rootfs"
[    0.586806] mtd: device 7 (rootfs) set to be root filesystem
[    0.592598] 1 squashfs-split partitions found on MTD device rootfs
[    0.598780] 0x000000820000-0x000001900000 : "rootfs_data"
[    0.621120] 0x000001bc0000-0x0000020c0000 : "tm_pattern"
[    0.631675] 0x0000020c0000-0x0000021c0000 : "tm_key"
[    0.637897] 0x0000021c0000-0x0000030c0000 : "user_data"
[    0.658204] 0x0000030c0000-0x000008000000 : "reserved"
[    0.663343] mtd: partition "reserved" extends beyond the end of device "1100d000.snfi" -- size truncated to 0x4500000
[    0.760024] libphy: Fixed MDIO Bus: probed
[    0.787933] libphy: mdio: probed
[    0.792429] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffffc0117c0000, irq 28
[    0.801966] i2c /dev entries driver
[    0.806393] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    0.817087] NET: Registered protocol family 10
[    0.822283] Segment Routing with IPv6
[    0.825996] NET: Registered protocol family 17
[    0.830548] 8021q: 802.1Q VLAN Support v1.8
[    0.836026] pstore: Using crash dump compression: deflate
[    0.850510] mtk-pcie 1a143000.pcie: host bridge /pcie@1a143000 ranges:
[    0.857082] mtk-pcie 1a143000.pcie: Parsing ranges property...
[    0.862919] mtk-pcie 1a143000.pcie:      MEM 0x0020000000..0x0027ffffff -> 0x0020000000
[    0.897485] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0000:00
[    0.903674] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.909153] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
[    0.916028] pci_bus 0000:00: scanning bus
[    0.920071] pci 0000:00:00.0: [14c3:3258] type 01 class 0x060400
[    0.926101] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.935009] pci_bus 0000:00: fixups for bus
[    0.939188] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    0.945887] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.953900] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    0.960683] pci_bus 0000:01: scanning bus
[    0.964899] pci 0000:01:00.0: [14c3:7915] type 00 class 0x000280
[    0.971076] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[    0.978399] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[    0.985722] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[    0.993676] pci 0000:01:00.0: supports D1 D2
[    0.997937] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.004570] pci 0000:01:00.0: PME# disabled
[    1.009049] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.053891] pci_bus 0000:01: fixups for bus
[    1.058069] pci_bus 0000:01: bus scan returning with max=01
[    1.063647] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.070257] pci_bus 0000:00: bus scan returning with max=01
[    1.075842] pci 0000:00:00.0: BAR 0: no space for [mem size 0x200000000 64bit pref]
[    1.083493] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x200000000 64bit pref]
[    1.091489] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
[    1.098275] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
[    1.106097] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref]
[    1.113921] pci 0000:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref]
[    1.121738] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.126704] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
[    1.133560] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
[    1.140165] pcieport 0000:00:00.0: assign IRQ: got 0
[    1.145135] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    1.151237] pcieport 0000:00:00.0: enabling bus mastering
[    1.157068] mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property
[    1.165258] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered
[    1.209027] libphy: dsa slave smi: probed
[    1.214094] mt7530 mdio-bus:00 wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
[    1.224524] mt7530 mdio-bus:00 lan4 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
[    1.234939] mt7530 mdio-bus:00 lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
[    1.245342] mt7530 mdio-bus:00 lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
[    1.255740] mt7530 mdio-bus:00 lan1 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
[    1.265856] mt7530 mdio-bus:00: configuring for fixed/2500base-x link mode
[    1.273424] mt7530 mdio-bus:00: Link is Up - 2.5Gbps/Full - flow control rx/tx
[    1.274028] DSA: tree 0 setup
[    1.289339] VFS: Mounted root (squashfs filesystem) readonly on device 31:14.
[    1.296691] Freeing unused kernel memory: 448K
[    1.322904] Run /sbin/init as init process
[    1.326991]   with arguments:
[    1.329948]     /sbin/init
[    1.332645]   with environment:
[    1.335783]     HOME=/
[    1.338132]     TERM=linux
[    1.605832] init: Console is alive
[    1.609327] init: - watchdog -
[    2.005894] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.079275] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.095763] init: - preinit -
[    2.456736] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
[    2.465263] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[    2.474072] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    2.481000] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode
[    2.488126] 8021q: adding VLAN 0 to HW filter on device lan1
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    6.534746] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[    6.542019] overlayfs: "xino" feature enabled using 2 upper inode bits.
[    6.549650] urandom-seed: Seed file not found (/etc/urandom.seed)
[    6.637548] procd: - early -
[    6.640492] procd: - watchdog -
[    7.198790] procd: - watchdog -
[    7.265580] procd: - ubus -
[    7.324867] procd: - init -
Please press Enter to activate this console.
[    7.641507] urngd: v1.0.2 started.
[    7.684419] kmodloader: loading kernel modules from /etc/modules.d/*
[    7.761961] Loading modules backported from Linux version v5.15-rc6-0-g519d81956ee2
[    7.769661] Backport generated by backports.git v5.15-rc6-1-0-gd44432d6
[    7.785432] xt_time: kernel timezone is -0000
[    7.839784] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.850093] mt7915e 0000:01:00.0: assign IRQ: got 136
[    7.855249] pci 0000:00:00.0: enabling bus mastering
[    7.860231] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
[    7.866320] mt7915e 0000:01:00.0: enabling bus mastering
[    7.942125] mt7622-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20190801210006a
[    7.942125]
[    8.026812] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20201105222230a
[    8.026812]
[    8.120658] mt7622-wmac 18000000.wmac: N9 Firmware Version: 2.0, Build Time: 20200131180931
[    8.318387] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20201105222304
[    8.425716] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323
[    8.556902] PPP generic driver version 2.4.2
[    8.562068] NET: Registered protocol family 24
[    8.572583] kmodloader: done loading kernel modules from /etc/modules.d/*
[   14.046128] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   14.075671] jffs2_build_filesystem(): unlocking the mtd device...
[   14.075678] done.
[   14.083784] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   14.418603] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
[   14.435902] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
[   14.444995] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[   14.454002] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.461546] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode
[   14.469359] 8021q: adding VLAN 0 to HW filter on device lan1
[   14.477482] br-lan: port 1(lan1) entered blocking state
[   14.482749] br-lan: port 1(lan1) entered disabled state
[   14.488343] device lan1 entered promiscuous mode
[   14.493015] device eth0 entered promiscuous mode
[   14.506058] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode
[   14.513249] 8021q: adding VLAN 0 to HW filter on device lan2
[   14.521232] br-lan: port 2(lan2) entered blocking state
[   14.526622] br-lan: port 2(lan2) entered disabled state
[   14.534906] device lan2 entered promiscuous mode
[   14.547103] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode
[   14.554601] 8021q: adding VLAN 0 to HW filter on device lan3
[   14.563954] br-lan: port 3(lan3) entered blocking state
[   14.569183] br-lan: port 3(lan3) entered disabled state
[   14.575504] device lan3 entered promiscuous mode
[   14.588488] mt7530 mdio-bus:00 lan4: configuring for phy/gmii link mode
[   14.595796] 8021q: adding VLAN 0 to HW filter on device lan4
[   14.603760] br-lan: port 4(lan4) entered blocking state
[   14.608981] br-lan: port 4(lan4) entered disabled state
[   14.615090] device lan4 entered promiscuous mode
[   14.626159] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode
[   14.633233] 8021q: adding VLAN 0 to HW filter on device wan
[   14.637546] mt7530 mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
[   14.646642] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[   15.710598] done.
[   15.712545] jffs2: notice: (1842) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   15.761757] overlayfs: upper fs does not support tmpfile.
[   15.769453] overlayfs: "xino" feature enabled using 32 upper inode bits.
[   19.636069] mt7530 mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control off
[   19.643425] br-lan: port 1(lan1) entered blocking state
[   19.648643] br-lan: port 1(lan1) entered forwarding state
[   19.654912] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   20.673969] mt7530 mdio-bus:00 lan1: Link is Down
[   20.678775] br-lan: port 1(lan1) entered disabled state
[   22.756065] mt7530 mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control off
[   22.763417] br-lan: port 1(lan1) entered blocking state
[   22.768635] br-lan: port 1(lan1) entered forwarding state

BusyBox v1.34.1 (2021-10-30 07:47:02 UTC) built-in shell (ash)

_______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
|__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r0+17889-b1c65e4a83
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#

WRC-X3200GST3

WSR-3200AX4Sに続き、3つ目のMT7622機。
機種発表の直後くらいに総務省の技適DBからMT7622搭載機であることを把握しており、今回某氏よりご提供頂きました。感謝。
ざっと見た限りでは特殊な個所も無さそうで、factoryも作れそうな雰囲気。
サポートのため弄っていくのでメモ。

Switch

zone	WAN	LAN
port (WRC-X3200GST3)	INTERNET	LAN4	LAN3	LAN2	LAN1
port (MT7531)	port0	port1	port2	port3	port4

MAC

LAN: 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex))
WAN: 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex))
2.4G: 04:AB:18:xx:xx:79 (Factory, 0x4 (hex))
5G: 04:AB:18:xx:xx:7A (none)

U-Boot

カウントダウン中にスペースキーを押下するとautobootが停止

help

MT7622> help
?       - alias for 'help'
backup_message- print backup message.
backup_mode- Enter backup mode
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
boot_to_ctp- boot to ctp
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootmenu- ANSI terminal bootmenu
bootp   - boot image via network using BOOTP/TFTP protocol
chpart  - change active partition
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
ctp_check- check if ctp in load_addr is normal.
detect_button- detect button
dialog  - echo args to console, and get yes or no response from user
download_setting- set download image file name , and device IP , server IP before upgrade
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
esw_read- esw_read   - Dump external switch/GMAC status !!

exit    - exit script
false   - do nothing, unsuccessfully
fdt     - flattened device tree utility commands
filesize_check- check if filesize of the image that you want to upgrade is normal.
go      - start application at address 'addr'
help    - print command description/usage
http_upgrade- http_upgrade
image_blks- read image size from img_size or image header if no specifying img_size, and divided by blk_size and save image blocks in image_blks variable.
image_check- check if image in load_addr is normal.
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
invaild_env- need to invaild env.
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mdio    - mdio   - Mediatek PHY register R/W command !!

mm      - memory modify (auto-incrementing address)
mtdparts- define flash/nand partitions
mtk_image_blks- read image size from image header (MTK format) located at load_addr, divided by blk_size and save image blocks in image_blks variable.
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nm      - memory modify (constant address)
nor     - nor   - nor flash command

ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reco_message- print recovery message.
reg     - reg   - Mediatek PHY register R/W command !!

reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
serious_image_check- seriously check if image in load_addr is normal.
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
snor    - snor   - spi-nor flash command

source  - run script from memory
switch_rxcal- Re-cal PHY Rx DC offset of mt7531 switch !!
switch_txcal- Re-cal PHY Tx offset of mt7531 switch !!
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
uboot_check- check if uboot in load_addr is normal.
uip     - uip   - uip command

version - print monitor, compiler and linker version

version

MT7622> version

U-Boot 2014.04-rc1-g0ae1633-dirty (Jul 02 2020 - 14:11:39)
arm-linux-gcc (Buildroot 2014.11) 4.9.2
GNU ld (GNU Binutils) 2.24

printenv

MT7622> printenv
W_R_mode=NULL
admin_password=********
arch=arm
atf_filename=trustzone.bin
baudrate=115200
board=mt7622_evb
board_id=602111601752
board_name=mt7622_evb
boot0=download_setting kernel;tftpboot ${loadaddr} ${kernel_filename}; bootm
boot1=download_setting kernel;tftpboot ${loadaddr} ${kernel_filename};run boot_wr_img;run boot_rd_img;bootm
boot10=if dialog "WARNING, this operation will flash all partitions (preloader + atf + uboot + linux)";then download_setting flashimage;tftpboot ${loadaddr} ${flashimage_filename};run wr_flashimage;invaild_env;else echo "operation aborted by user";fi;
boot2=run boot_rd_img;bootm
boot3=download_setting uboot;tftpboot ${loadaddr} ${uboot_filename};run wr_uboot;invaild_env
boot4=loadb;run wr_uboot;invaild_env
boot5=download_setting atf;tftpboot ${loadaddr} ${atf_filename};run wr_atf
boot6=download_setting preloader;tftpboot ${loadaddr} ${preloader_filename};run wr_pl
boot7=download_setting hdr;tftpboot ${loadaddr} ${hdr_filename};run wr_rom_hdr
boot8=download_setting ctp;tftpboot ${loadaddr} ${ctp_filename};run wr_ctp
boot9=run boot_rd_ctp;boot_to_ctp
boot_rd_ctp=nand read 0x40000000 0x1400000 3000000
boot_rd_img=nand read ${loadaddr} 0x2C0000 2000;image_blks 2048;nand read ${loadaddr} 0x2C0000 ${img_align_size}
boot_wr_img=filesize_check 0x2000000;if test ${filesize_result} = good; then image_blks 131072;nand erase.spread 0x2C0000  ${filesize} ${loadaddr};image_blks 2048;nand write ${loadaddr} 0x2C0000 ${filesize};fi
bootcmd=No
bootdelay=5
bootfile=iverson_uImage
bootmenu_0=1. System Load Linux to SDRAM via TFTP.=run boot0
bootmenu_1=2. System Load Linux Kernel then write to Flash via TFTP.=run boot1
bootmenu_10=b. System Load SingleImage then write to Flash via TFTP.=run boot10
bootmenu_2=3. Boot system code via Flash.=run boot2
bootmenu_3=4. System Load U-Boot then write to Flash via TFTP.=run boot3
bootmenu_4=5. System Load U-Boot then write to Flash via Serial.=run boot4
bootmenu_5=6. System Load ATF then write to Flash via TFTP.=run boot5
bootmenu_6=7. System Load Preloader then write to Flash via TFTP.=run boot6
bootmenu_7=8. System Load ROM header then write to Flash via TFTP.=run boot7
bootmenu_8=9. System Load CTP then write to Flash via TFTP.=run boot8
bootmenu_9=a. System Load CTP then Boot to CTP (via Flash).=run boot9
bootmenu_delay=30
cpu=armv7
ctp_filename=ctp.bin
ethact=mtk_eth
ethaddr=00:0C:E7:11:22:33
fdt_high=0x6c000000
flashimage_filename=flashimage.bin
gpt_filename=GPT_EMMC
hdr_filename=hdr.binary
hw_version=A1
invaild_env=no
ipaddr=192.168.2.1
kernel_filename=1019_g01.bin
load_image=kernel
loadaddr=0x4007FF28
model_id=WRC-X3200GST3
preloader_filename=preloader_fpga7622_64_ldvt.bin
serverip=192.168.2.2
soc=mt7622
stderr=serial
stdin=serial
stdout=serial
uboot_filename=u-boot-mtk.bin
vendor=mediatek
wlan0_domain=0x41
wlan0_guest_key=********
wlan0_guest_ssid=e-tomo-****77
wlan0_key=**********
wlan0_ssid=elecom-****77
wlan1_key=**********
wlan1_ssid=elecom-****77
wps_pin=********
wr_atf=filesize_check 0x20000;if test ${filesize_result} = good; then mtk_image_blks 131072;nand erase.spread 0x80000   ${filesize} ;mtk_image_blks 2048;nand write ${loadaddr} 0x80000 ${filesize};fi
wr_ctp=filesize_check 0xF20000;if test ${filesize_result} = good; then nand erase.spread 0x1400000 3000000 ;nand write ${loadaddr} 0x1400000 3000000;fi
wr_flashimage=filesize_check 0x8000000;if test ${filesize_result} = good; then nand erase.chip ;nand write ${loadaddr} 0x0 8000000;fi
wr_pl=filesize_check 0x40000;if test ${filesize_result} = good; then nand erase.spread 0x00000 40000 ;nand write ${loadaddr} 0x00000 40000;fi
wr_rom_hdr=filesize_check 0x40000;if test ${filesize_result} = good; then nand erase.spread 0x00000 20000 ;nand write ${loadaddr} 0x00000 20000;fi
wr_uboot=filesize_check 0x60000;if test ${filesize_result} = good; then mtk_image_blks 131072;nand erase.spread 0xC0000  ${filesize} ;mtk_image_blks 2048;nand write ${loadaddr} 0xC0000 ${filesize};fi

Environment size: 4105/4092 bytes

nand info

MT7622> nand info

Device 0: nand0, sector size 128 KiB
Page size      2048 b
OOB size         64 b
Erase size   131072 b

bdinfo

MT7622> bdinfo
arch_number = 0x00001DC6
boot_params = 0x40000100
DRAM bank   = 0x00000000
-> start    = 0x40000000
-> size     = 0x1F000000
eth0name    = mtk_eth
ethaddr     = 00:0C:E7:11:22:33
current eth = mtk_eth
ip_addr     = 192.168.2.1
baudrate    = 115200 bps
TLB addr    = 0x5EFF0000
relocaddr   = 0x5EF52000
reloc off   = 0x1D152000
irq_sp      = 0x5CF50F40
sp start    = 0x5CF50F30

tftpboot

MT7622> tftpboot
ETH already turn on and power on flow will be skipped...

Waitting for RX_DMA_BUSY status Start... done

mt7531: mt7531_sw_init
mt7531: mt7531_core_pll_setup, hwstrap = 000000ff, xtal=25MHz
mt7531: mt7531_mac_port_setup, port = 6
mt7531: mt7531_set_port_sgmii_force_mode, port = 6
mt7531: timeout waiting for SGMII_LINK
mt7531: mt7531_mac_port_setup, PMCR6 = f805633b
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
-------- gephy-calbration (port:0) --------
CALDLY = 40
0x1e-e0 = 2828
0x1f-115 = 5
GE Rext AnaCal Done! (8)(0x28)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE 1e_174(0xb2b4), 1e_175(0xb4b2)
GE Tx offset AnaCal Done! (pair-0)(2)(0x21) 0x1e_172=0x2120
GE Tx offset AnaCal Done! (pair-1)(5)(0x5) 0x1e_172=0x2105
GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x2222
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x681a)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2020)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1d25)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
PORT 0 RX_DC_OFFSET
before pairA output = f
after pairA output = 0
before pairB output = f
after pairB output = fe
before pairC output = f
after pairC output = 0
before pairD output = d
after pairD output = 1
-------- gephy-calbration (port:1) --------
CALDLY = 40
GE R50 AnaCal Done! (11) (0x31)(0xb1)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE 1e_174(0xb1b2), 1e_175(0xb4b2)
GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
GE Tx offset AnaCal Done! (pair-1)(1)(0x1) 0x1e_172=0x2201
GE Tx offset AnaCal Done! (pair-2)(7)(0x26) 0x1e_173=0x2620
GE Tx offset AnaCal Done! (pair-3)(2)(0x2) 0x1e_173=0x2602
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x6c1b)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2121)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1820)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
PORT 1 RX_DC_OFFSET
before pairA output = f
after pairA output = 1
before pairB output = 1e
after pairB output = 0
before pairC output = e
after pairC output = fe
before pairD output = e
after pairD output = 0
-------- gephy-calbration (port:2) --------
CALDLY = 40
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE 1e_174(0xb4b4), 1e_175(0xb4b4)
GE Tx offset AnaCal Done! (pair-0)(4)(0x23) 0x1e_172=0x2320
GE Tx offset AnaCal Done! (pair-1)(8)(0x27) 0x1e_172=0x2327
GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
GE Tx offset AnaCal Done! (pair-3)(5)(0x24) 0x1e_173=0x2224
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5c17)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1d1d)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x131b)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1c24)
PORT 2 RX_DC_OFFSET
before pairA output = e
after pairA output = 1
before pairB output = f
after pairB output = ff
before pairC output = e
after pairC output = ff
before pairD output = 1e
after pairD output = 0
-------- gephy-calbration (port:3) --------
CALDLY = 40
GE R50 AnaCal Done! (10) (0x32)(0xb2)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE R50 AnaCal Done! (9) (0x34)(0xb4)
GE 1e_174(0xb2b4), 1e_175(0xb4b4)
GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
GE Tx offset AnaCal Done! (pair-1)(2)(0x21) 0x1e_172=0x2221
GE Tx offset AnaCal Done! (pair-2)(2)(0x2) 0x1e_173=0x220
GE Tx offset AnaCal Done! (pair-3)(5)(0x24) 0x1e_173=0x224
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x4010)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1717)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x161e)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
PORT 3 RX_DC_OFFSET
before pairA output = 1e
after pairA output = ff
before pairB output = f
after pairB output = ff
before pairC output = 1c
after pairC output = ff
before pairD output = f
after pairD output = 0
-------- gephy-calbration (port:4) --------
CALDLY = 40
GE R50 AnaCal Done! (6) (0x40)(0xc0)
GE R50 AnaCal Done! (6) (0x40)(0xc0)
GE R50 AnaCal Done! (6) (0x40)(0xc0)
GE R50 AnaCal Done! (7) (0x37)(0xb7)
GE 1e_174(0xc0c0), 1e_175(0xc0b7)
GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2223
GE Tx offset AnaCal Done! (pair-2)(6)(0x25) 0x1e_173=0x2520
GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2523
GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x4812)
GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1010)
GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x121a)
GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x121a)
PORT 4 RX_DC_OFFSET
before pairA output = e
after pairA output = 1
before pairB output = e
after pairB output = 1
before pairC output = e
after pairC output = ff
before pairD output = 1e
after pairD output = 1
0x1b000014 = 0x00110214
Using mtk_eth device
TFTP from server 192.168.2.2; our IP address is 192.168.2.1
Filename 'iverson_uImage'.
Load address: 0x4007ff28
Loading: *

Kernel

コンソールにパスワードが掛けられている為ログイン不可
failsafeも削除されている模様

bootlog


F0: 102B 0000
F6: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 0000 0041 [0000]
G0: 0190 0000
T0: 0000 0369 [000F]
Jump to BL

UNIVPLL_CON0 = 0xFE000000!!!
mt_pll_init: Set pll frequency for 25M crystal
[PMIC_WRAP]wrap_init pass,the return value=0.
[pmic_init] Preloader Start..................
[pmic_init] MT6380 CHIP Code, reg_val = 0, 1:E2  0:E3
[pmic_init] Done...................
Chip part number:7622B
MT7622 Version: 1.2.8, (iPA)
SSC OFF
mt_pll_post_init: mt_get_cpu_freq = 1350000Khz
mt_pll_post_init: mt_get_mem_freq = 1600000Khz
mt_pll_post_init: mt_get_bus_freq = 1119920Khz
[PLFM] Init I2C: OK(0)

[BLDR] Build Time: 20200518-110732
==== Dump RGU Reg ========
RGU MODE:     4D
RGU LENGTH:   FFE0
RGU STA:      0
RGU INTERVAL: FFF
RGU SWSYSRST: 8000
==== Dump RGU Reg End ====
RGU: g_rgu_satus:0
mtk_wdt_mode_config  mode value=10, tmp:22000010
PL P ON
WDT does not trigger reboot
WDT NONRST=0x20000000
WDT IRQ_EN=0x340003
RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590200F3)
[EMI] MDL number = 2
[EMI] DRAMC calibration start

[EMI] DRAMC calibration end

[EMI]rank size auto detect
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x48000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0x12345678, test_addr[0x50000000]= 0xEDCBA987
[EMI]start_addr[0x40000000]=0xEDCBA987, test_addr[0x60000000]= 0xEDCBA987
[EMI]rank0 size: 0x20000000
[MEM] complex R/W mem test pass
RAM_CONSOLE wdt status (0x0)=0x0
[BBT] BMT.v2 is found at 0x3FF
[PLFM] Init Boot Device: OK(0)

NAND read: device 0 offset 0x2c0000, size 0x2000
8192 bytes read: OK
[do_read_image_blks] This is a FIT image,img_size = 0x283974
[do_read_image_blks] img_blks = 0x508
[do_read_image_blks] img_align_size = 0x284000

NAND read: device 0 offset 0x2c0000, size 0x284000
2637824 bytes read: OK
bootm flag=0, states=70f
## Loading kernel from FIT Image at 4007ff28 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description:  ARM64 OpenWrt Linux-4.4.198
Type:         Kernel Image
Compression:  lzma compressed
Data Start:   0x40080010
Data Size:    2606535 Bytes = 2.5 MiB
Architecture: AArch64
OS:           Linux
Load Address: 0x41080000
Entry Point:  0x41080000
Hash algo:    crc32
Hash value:   bc27cf14
Hash algo:    sha1
Hash value:   600157de1c764a08723a8bd3235be2ce3a4e50eb
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 4007ff28 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description:  ARM64 OpenWrt MTK-AX3200-MT7531 device tree blob
Type:         Flat Device Tree
Compression:  uncompressed
Data Start:   0x402fc71c
Data Size:    28248 Bytes = 27.6 KiB
Architecture: AArch64
Hash algo:    crc32
Hash value:   f922ef34
Hash algo:    sha1
Hash value:   b2a3095ec197bec41e11c083a7c5e3a66e1b357a
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x402fc71c
Uncompressing Kernel Image ... OK
Loading Device Tree to 5cf45000, end 5cf4ee57 ... OK

Starting kernel ...

[ATF][     7.421554]save kernel info
[ATF][     7.424490]Kernel_EL2
[ATF][     7.427161]Kernel is 64Bit
[ATF][     7.430249]pc=0x41080000, r0=0x5cf45000, r1=0x0
INFO:    BL3-1: Preparing for EL3 exit to normal world, Kernel
INFO:    BL3-1: Next image address = 0x41080000
INFO:    BL3-1: Next image spsr = 0x3c9
[ATF][     7.447947]el3_exit
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.198 (dbshadow@dbshadow-VirtualBox) (gcc version 5.4.0 (LEDE GCC 5.4.0 unknown) ) #0 SMP PREEMPT Mon Dec 28 13:05:43 UTC 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] On node 0 totalpages: 131024
[    0.000000]   DMA zone: 2048 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 131024 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 18 pages/cpu @ffffffc01ffaa000 s35328 r8192 d30208 u73728
[    0.000000] pcpu-alloc: s35328 r8192 d30208 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128976
[    0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 swiotlb=512                               rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] software IO TLB: mapped [mem 0x5fcf4000-0x5fdf4000] (1MB)
[    0.000000] Memory: 497412K/524096K available (5104K kernel code, 402K rwdata, 1816K rodata, 324K init, 391K bss, 26684K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8008746000 - 0xffffff8008797000   (   324 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff800857d000   (  5108 KB)
[    0.000000]     .rodata : 0xffffff800857d000 - 0xffffff8008746000   (  1828 KB)
[    0.000000]       .data : 0xffffff8008797000 - 0xffffff80087fbaa0   (   403 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0000000 - 0xffffffbdc0800000   (     8 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc020000000   (   512 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[    0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[    0.000058] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126102035 ns
[    0.000227] Console: colour dummy device 80x25
[    0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
[    0.000250] pid_max: default: 32768 minimum: 301
[    0.000299] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000305] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000796] sched-energy: CPU device node has no sched-energy-costs
[    0.000802] Invalid sched_group_energy for CPU0
[    0.000806] CPU0: update cpu_capacity 1024
[    0.000835] ASID allocator initialised with 32768 entries
[    0.032097] Detected VIPT I-cache on CPU1
[    0.032126] Invalid sched_group_energy for CPU1
[    0.032128] CPU1: update cpu_capacity 1024
[    0.032130] CPU1: Booted secondary processor [410fd034]
[    0.032164] Brought up 2 CPUs
[    0.032176] SMP: Total of 2 processors activated.
[    0.032182] CPU features: detected feature: 32-bit EL0 Support
[    0.032188] CPU: All CPU(s) started at EL2
[    0.032200] alternatives: patching kernel code
[    0.032274] Invalid sched_group_energy for CPU1
[    0.032279] Invalid sched_group_energy for Cluster1
[    0.032282] Invalid sched_group_energy for CPU0
[    0.032286] Invalid sched_group_energy for Cluster0
[    0.036346] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.036364] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.036470] pinctrl core: initialized pinctrl subsystem
[    0.036965] NET: Registered protocol family 16
[    0.037372] [SPM] spm_base = ffffff8008026000
[    0.037376] [SPM] spm_irq_0 = 6, spm_irq_1 = 7
[    0.037380] [SPM] spm_irq_2 = 8, spm_irq_3 = 9
[    0.037383] [SPM] set spm as wakeup devcie.
[    0.037387] [SPM] spm_rtc cnt: 24414.
[    0.052059] cpuidle: using governor menu
[    0.052112] vdso: 2 pages (1 code @ ffffff8008583000, 1 data @ ffffff800879c000)
[    0.052267] DMA: preallocated 256 KiB pool for atomic allocations
[    0.052365] Serial: AMBA PL011 UART driver
[    0.052420] [SPM] PWAKE_EN:1, PCMWDT_EN:0, BYPASS_SYSPWREQ:0, I2C_CHANNEL:2
[    0.052424] [SLP] SLEEP_DPIDLE_EN:1, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:1
[    0.077785] vgaarb: loaded
[    0.078031] SCSI subsystem initialized
[    0.079768] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
[    0.079780] pci_bus 0000:00: root bus resource [mem 0x18000000-0x180fffff]
[    0.079787] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.079806] pci 0000:00:00.0: [14c3:7622] type 00 class 0x000280
[    0.079822] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
[    0.079829] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
[    0.079835] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
[    0.079841] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
[    0.079847] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
[    0.079877] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[    0.080296] clocksource: Switched to clocksource arch_sys_counter
[    0.086843] NET: Registered protocol family 2
[    0.087219] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.087253] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[    0.087312] TCP: Hash tables configured (established 4096 bind 4096)
[    0.087356] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.087369] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.087472] NET: Registered protocol family 1
[    0.087625] RPC: Registered named UNIX socket transport module.
[    0.087630] RPC: Registered udp transport module.
[    0.087633] RPC: Registered tcp transport module.
[    0.087636] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.087658] PCI: CLS 0 bytes, default 128
[    0.095854] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.096469] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.096960] fuse init (API version 7.23)
[    0.097612] io scheduler noop registered
[    0.097798] io scheduler cfq registered (default)
[    0.126341] mtk-pcie 1a143000.pcie: pcie rc 0 linkup success
[    0.126490] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0001:00
[    0.126501] pci_bus 0001:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.126507] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
[    0.126514] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.126550] pci 0001:00:00.0: [14c3:5396] type 01 class 0x060400
[    0.126603] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[    0.126724] pci 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
[    0.126849] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.127069] pci 0001:01:00.0: [14c3:7915] type 00 class 0x000280
[    0.127374] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[    0.127487] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[    0.127600] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[    0.128113] pci 0001:01:00.0: supports D1 D2
[    0.128119] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136374] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.136413] pci 0001:00:00.0: BAR 0: no space for [mem size 0xffffffff 64bit pref]
[    0.136420] pci 0001:00:00.0: BAR 0: failed to assign [mem size 0xffffffff 64bit pref]
[    0.136426] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
[    0.136435] pci 0001:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
[    0.136526] pci 0001:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref]
[    0.136616] pci 0001:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref]
[    0.136706] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.136717] pci 0001:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
[    0.136775] pcieport 0001:00:00.0: of_irq_parse_pci() failed with rc=-22
[    0.136790] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[    0.136968] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
[    0.136974] pci 0001:01:00.0: Signaling PME through PCIe PME interrupt
[    0.136983] pcie_pme 0001:00:00.0:pcie01: service driver pcie_pme loaded
[    0.237854] mtk-pcie 1a145000.pcie: Port1 link down
[    0.238022] mtk-pcie 1a145000.pcie: PCI host bridge to bus 0002:00
[    0.238029] pci_bus 0002:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.238035] pci_bus 0002:00: root bus resource [mem 0x28000000-0x2fffffff]
[    0.238041] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.242027] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.243093] console [ttyS0] disabled
[    0.263328] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 232, base_baud = 1562500) is a ST16650V2
[    1.155059] console [ttyS0] enabled
[    1.159278] Unable to detect cache hierarchy for CPU 0
[    1.167444] loop: module loaded
[    1.171077] dump_power_table[0] = { .cpufreq_khz = 1350000,  .cpufreq_ncpu = 2,      .cpufreq_power = 995 }
[    1.180301] dump_power_table[1] = { .cpufreq_khz = 1262500,  .cpufreq_ncpu = 2,      .cpufreq_power = 811 }
[    1.189520] dump_power_table[2] = { .cpufreq_khz = 1137500,  .cpufreq_ncpu = 2,      .cpufreq_power = 736 }
[    1.198759] dump_power_table[3] = { .cpufreq_khz = 1025000,  .cpufreq_ncpu = 2,      .cpufreq_power = 624 }
[    1.207977] dump_power_table[4] = { .cpufreq_khz = 1350000,  .cpufreq_ncpu = 1,      .cpufreq_power = 517 }
[    1.217192] dump_power_table[5] = { .cpufreq_khz = 812500,   .cpufreq_ncpu = 2,      .cpufreq_power = 492 }
[    1.226321] dump_power_table[6] = { .cpufreq_khz = 1262500,  .cpufreq_ncpu = 1,      .cpufreq_power = 377 }
[    1.235537] dump_power_table[7] = { .cpufreq_khz = 600000,   .cpufreq_ncpu = 2,      .cpufreq_power = 376 }
[    1.244667] dump_power_table[8] = { .cpufreq_khz = 1137500,  .cpufreq_ncpu = 1,      .cpufreq_power = 333 }
[    1.253881] dump_power_table[9] = { .cpufreq_khz = 437500,   .cpufreq_ncpu = 2,      .cpufreq_power = 295 }
[    1.263011] dump_power_table[10] = { .cpufreq_khz = 1025000, .cpufreq_ncpu = 1,      .cpufreq_power = 258 }
[    1.272316] dump_power_table[11] = { .cpufreq_khz = 300000,  .cpufreq_ncpu = 2,      .cpufreq_power = 225 }
[    1.281531] dump_power_table[12] = { .cpufreq_khz = 812500,  .cpufreq_ncpu = 1,      .cpufreq_power = 204 }
[    1.290745] dump_power_table[13] = { .cpufreq_khz = 600000,  .cpufreq_ncpu = 1,      .cpufreq_power = 166 }
[    1.299958] dump_power_table[14] = { .cpufreq_khz = 437500,  .cpufreq_ncpu = 1,      .cpufreq_power = 140 }
[    1.309173] dump_power_table[15] = { .cpufreq_khz = 300000,  .cpufreq_ncpu = 1,      .cpufreq_power = 119 }
[    1.319568] [cal] calefuse1  = 0x82f4eb80
[    1.323502] [cal] calefuse2  = 0x728010
[    1.327252] [cal] g_adc_ge_t = 0x34e
[    1.330824] [cal] g_adc_oe_t = 0x20b
[    1.334398] [cal] g_degc_cali        = 0x2e
[    1.337969] [cal] g_adc_cali_en_t    = 0x1
[    1.341803] [cal] g_o_slope  = 0x0
[    1.345114] [cal] g_o_slope_sign     = 0x0
[    1.348861] [cal] g_id               = 0x0
[    1.351818] [cal] g_o_vtsmcu1        = 0x0
[    1.355302] [cal] g_o_vtsmcu2        = 0x1ca
[    1.358960] [cal] g_o_vtsmcu3        = 0x0
[    1.362444] [cal] g_o_vtsmcu4        = 0x0
[    1.365928] [cal] g_ge               = 0x32f
[    1.369063] [cal] g_gain             = 0x2a3f
[    1.372460] [cal] g_x_roomt1 = 0x1f51
[    1.379035] MTK-BTIF[E]hal_btif_clk_get_and_prepare(286):[CCF]clk_btif=ffffffc003196280
[    1.387062] MTK-BTIF[E]hal_btif_clk_get_and_prepare(292):[CCF]clk_btif_apdma=ffffffc003196580
[    1.397412] [btmtk_err] btmtk_get_irq: irq_id:239 irq_flags:8
[    1.414122] Recognize NAND: ID [
[    1.417193] ef aa
[    1.419202] 21 [    1.420959] ], [Winbond 1Gb], Page[2048]B, Spare [64]B Total [128]MB
[    1.427496] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
[    1.433850] nand: Winbond NAND 128MiB 1,8V 8-bit
[    1.438465] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.446033] [NAND]select ecc bit:4, sparesize :64
[    1.451622] [BBT] BMT.v2 is found at 0x3ff
[    1.455742] 9 ofpart partitions found on MTD device MTK-SNAND
[    1.461486] Creating 9 MTD partitions on "MTK-SNAND":
[    1.466537] 0x000000000000-0x000000080000 : "Preloader"
[    1.472876] 0x000000080000-0x0000000c0000 : "ATF"
[    1.478326] 0x0000000c0000-0x000000140000 : "Bootloader"
[    1.488699] 0x000000140000-0x0000001c0000 : "Config"
[    1.494693] 0x0000001c0000-0x0000002c0000 : "Factory"
[    1.501350] 0x0000002c0000-0x000001bc0000 : "firmware"
[    1.539159] 2 fit-fw partitions found on MTD device firmware
[    1.544818] 0x0000002c0000-0x000000560000 : "kernel"
[    1.553261] 0x000000560000-0x000001bc0000 : "rootfs"
[    1.584286] mtd: device 7 (rootfs) set to be root filesystem
[    1.589966] 0x000001bc0000-0x0000020c0000 : "tm_pattern"
[    1.601446] 0x0000020c0000-0x0000021c0000 : "tm_key"
[    1.608023] 0x0000021c0000-0x0000030c0000 : "rootfs_data"
[    1.631047] mtk-snand 1100d000.snfi: [mtk_snand] probe successfully!
[    1.638080] libphy: Fixed MDIO Bus: probed
[    1.642612] sean debug physpeed = 2500
[    1.669055] libphy: mdio: probed
[    1.672309] mtk_soc_eth 1b100000.ethernet: generated random MAC address 5a:3f:9e:62:a8:6f
[    1.680666] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.691341] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffff8008940000, irq 248
[    1.700498] mtk_soc_eth 1b100000.ethernet: generated random MAC address ea:30:fd:6b:f0:2f
[    1.708834] mtk_soc_eth 1b100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY]
[    1.719462] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xffffff8008940000, irq 248
[    1.728600] netif_napi_add() called with weight 256 on device
[    1.735628] MTK_WDT_NONRST_REG(20000000)
[    1.739740] mtk-wdt 10212000.watchdog: register restart_handler on reboot_notifier_list for psci reset
[    1.749062] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    1.756989] register cpuidle driver!!!!!!!!!!!!!!!!!
[    1.764491] nf_conntrack version 0.5.0 (3886 buckets, 15544 max)
[    1.771324] NET: Registered protocol family 10
[    1.776535] sit: IPv6 over IPv4 tunneling driver
[    1.781561] NET: Registered protocol family 17
[    1.786086] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.798696] 8021q: 802.1Q VLAN Support v1.8
[    1.803276] registered taskstats version 1
[    2.344624] mt753x gsw@0: Switch is MediaTek MT7531BE rev 1
[    2.354784] mt753x gsw@0: HWSTRAP=0xff XTAL=25MHz
[    2.630099] random: nonblocking pool is initialized
[    2.680318] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gdm1_to_gmac1_esw updated = 1
[    2.689456] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[    2.698242] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[    2.706679] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 1
[    2.716588] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[    2.725538] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gdm1_to_gmac1_esw updated = 0
[    2.728352] libphy: mt753x_mdio: probed
[    2.728354] [LOG]|WIRE| LAN Starting
[    2.742080] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[    2.750870] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[    2.759312] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 0
[    2.769236] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[    3.001631] mt753x gsw@0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
[    3.009912] mt753x gsw@0: -------- gephy-calbration (port:0) --------
[    3.027494] CALDLY = 40
[    3.098186] 0x1e-e0 = 2828
[    3.103057] 0x1f-115 = 5
[    3.105589]   GE Rext AnaCal Done! (8)(0x28)
[    3.185586]  GE R50 AnaCal Done! (10) (0x32)(0xb2)
[    3.253980]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    3.322283]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    3.395309]  GE R50 AnaCal Done! (10) (0x32)(0xb2)
[    3.403702]  GE 1e_174(0xb2b4), 1e_175(0xb4b2)
[    3.447003]  GE Tx offset AnaCal Done! (pair-0)(2)(0x21) 0x1e_172=0x2120
[    3.491396]  GE Tx offset AnaCal Done! (pair-1)(5)(0x5) 0x1e_172=0x2105
[    3.524934]  GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
[    3.558552]  GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x2222
[    3.652512]  GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x681a)
[    3.743394]  GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2020)
[    3.817982]  GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1d25)
[    3.866017]  GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
[    3.920215] PORT 0 RX_DC_OFFSET
[    3.934632] before pairA output = f
[    3.940223] after pairA output = ff
[    3.945729] before pairB output = f
[    3.951314] after pairB output = fe
[    3.956822] before pairC output = f
[    3.962409] after pairC output = 0
[    3.967831] before pairD output = d
[    3.973421] after pairD output = 1
[    3.977126] mt753x gsw@0: -------- gephy-calbration (port:1) --------
[    3.993938] CALDLY = 40
[    4.067052]  GE R50 AnaCal Done! (11) (0x31)(0xb1)
[    4.136704]  GE R50 AnaCal Done! (10) (0x32)(0xb2)
[    4.200974]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    4.270506]  GE R50 AnaCal Done! (10) (0x32)(0xb2)
[    4.278907]  GE 1e_174(0xb1b2), 1e_175(0xb4b2)
[    4.327560]  GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
[    4.350417]  GE Tx offset AnaCal Done! (pair-1)(1)(0x1) 0x1e_172=0x2201
[    4.405519]  GE Tx offset AnaCal Done! (pair-2)(7)(0x26) 0x1e_173=0x2620
[    4.433743]  GE Tx offset AnaCal Done! (pair-3)(2)(0x2) 0x1e_173=0x2602
[    4.527599]  GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x6c1b)
[    4.618478]  GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x2121)
[    4.653104]  GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1820)
[    4.701148]  GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
[    4.755454] PORT 1 RX_DC_OFFSET
[    4.769754] before pairA output = f
[    4.775344] after pairA output = 1
[    4.780768] before pairB output = 1e
[    4.786442] after pairB output = 0
[    4.791864] before pairC output = d
[    4.797449] after pairC output = 1
[    4.802865] before pairD output = e
[    4.808466] after pairD output = 0
[    4.812164] mt753x gsw@0: -------- gephy-calbration (port:2) --------
[    4.829002] CALDLY = 40
[    4.891195]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    4.955330]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.019500]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.083668]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.091964]  GE 1e_174(0xb4b4), 1e_175(0xb4b4)
[    5.146013]  GE Tx offset AnaCal Done! (pair-0)(4)(0x23) 0x1e_172=0x2320
[    5.206539]  GE Tx offset AnaCal Done! (pair-1)(8)(0x27) 0x1e_172=0x2327
[    5.240142]  GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
[    5.279163]  GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2223
[    5.352991]  GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5c17)
[    5.429952]  GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1e1e)
[    5.490838]  GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x131b)
[    5.551763]  GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1c24)
[    5.605619] PORT 2 RX_DC_OFFSET
[    5.619927] before pairA output = e
[    5.625503] after pairA output = 1
[    5.630905] before pairB output = f
[    5.636470] after pairB output = ff
[    5.641952] before pairC output = e
[    5.647521] after pairC output = ff
[    5.653010] before pairD output = 1e
[    5.658667] after pairD output = ff
[    5.662458] mt753x gsw@0: -------- gephy-calbration (port:3) --------
[    5.679183] CALDLY = 40
[    5.746294]  GE R50 AnaCal Done! (10) (0x32)(0xb2)
[    5.809847]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.873978]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.941761]  GE R50 AnaCal Done! (9) (0x34)(0xb4)
[    5.950321]  GE 1e_174(0xb2b4), 1e_175(0xb4b4)
[    6.002115]  GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
[    6.026086]  GE Tx offset AnaCal Done! (pair-1)(1)(0x1) 0x1e_172=0x2201
[    6.055727]  GE Tx offset AnaCal Done! (pair-2)(2)(0x2) 0x1e_173=0x220
[    6.102619]  GE Tx offset AnaCal Done! (pair-3)(5)(0x24) 0x1e_173=0x224
[    6.231292]  GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x4010)
[    6.270766]  GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1717)
[    6.314593]  GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x161e)
[    6.358421]  GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
[    6.416195] PORT 3 RX_DC_OFFSET
[    6.431394] before pairA output = 1e
[    6.437218] after pairA output = ff
[    6.442863] before pairB output = f
[    6.448592] after pairB output = ff
[    6.454240] before pairC output = 1c
[    6.460057] after pairC output = ff
[    6.465709] before pairD output = f
[    6.471444] after pairD output = 0
[    6.475173] mt753x gsw@0: -------- gephy-calbration (port:4) --------
[    6.492742] CALDLY = 40
[    6.547730]  GE R50 AnaCal Done! (7) (0x37)(0xb7)
[    6.604495]  GE R50 AnaCal Done! (7) (0x37)(0xb7)
[    6.655508]  GE R50 AnaCal Done! (6) (0x40)(0xc0)
[    6.718073]  GE R50 AnaCal Done! (8) (0x35)(0xb5)
[    6.726650]  GE 1e_174(0xb7b7), 1e_175(0xc0b5)
[    6.777823]  GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
[    6.811436]  GE Tx offset AnaCal Done! (pair-1)(3)(0x22) 0x1e_172=0x2222
[    6.860845]  GE Tx offset AnaCal Done! (pair-2)(6)(0x25) 0x1e_173=0x2520
[    6.899442]  GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x2523
[    7.005871]  GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x4812)
[    7.082694]  GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1010)
[    7.150267]  GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x121a)
[    7.217848]  GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x121a)
[    7.271702] PORT 4 RX_DC_OFFSET
[    7.286032] before pairA output = e
[    7.291596] after pairA output = 1
[    7.296992] before pairB output = e
[    7.302558] after pairB output = 0
[    7.307953] before pairC output = e
[    7.313521] after pairC output = fe
[    7.319008] before pairD output = 1e
[    7.324660] after pairD output = 1
[    7.331318] [SPM] pwrap node has not register regmap
[    7.336764] regulator regulator.1: info->modeset_reg 0xc = 0x181c32a2
[    7.343963] [SVS] DCVALUES is minus, set 0
[    7.348229] regulator regulator.1: info->modeset_reg 0xc = 0x101c32a2
[    7.381374] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    7.388821] Freeing unused kernel memory: 324K
[    7.393277] This architecture does not have kernel memory protection.
[    7.731352] init: Console is alive
[    7.734892] init: - watchdog -
[    8.193995] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    8.224354] gpio-keys gpio-keys: failed to set debounce_interval for gpio:511
[    8.238177] libata version 3.00 loaded.
[    8.243915] ahci 1a200000.sata: forcing port_map 0x0 -> 0x1
[    8.249588] ahci 1a200000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    8.258126] ahci 1a200000.sata: flags: ncq sntf pm clo only pmp pio slum part ccc apst
[    8.270716] scsi host0: ahci
[    8.273826] ata1: SATA max UDMA/133 mmio [mem 0x1a200000-0x1a2010ff] port 0x100 irq 247
[    8.600315] ata1: SATA link down (SStatus 0 SControl 300)
[    8.606046] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    8.614069] init: - preinit -
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   13.404730] jffs2: notice: (844) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   13.422516] mount_root: switching to jffs2 overlay
[   13.438279] urandom-seed: Seeding with /etc/urandom.seed
[   13.515617] procd: - early -
[   13.518569] procd: - watchdog -
[   14.084579] procd: - watchdog -
[   14.087834] procd: - ubus -
[   14.175961] procd: - init -
Please press Enter to activate this console.
[   14.707469] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.733025] l2tp_core: L2TP core driver, V2.0
[   14.737965] l2tp_netlink: L2TP netlink interface
[   14.743055] gre: GRE over IPv4 demultiplexor driver
[   14.748454] ip_gre: GRE over IPv4 tunneling driver
[   14.755166] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   15.160088] cryptodev: driver 1.8 loaded.
[   15.348868] clink: Unknown symbol wifi_led_2g_update (err 0)
[   15.354731] clink: Unknown symbol wifi_led_5g_update (err 0)
[   15.418273] Bridge firewalling registered
[   15.422608] clink: Unknown symbol wifi_led_2g_update (err 0)
[   15.428391] clink: Unknown symbol wifi_led_5g_update (err 0)
[   15.447991] Ebtables v2.0 registered
[   15.453371] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.461356] -->mtfwd_init(ver:1.0)<--
[   15.467307] mediatek_soc_hnat 1b100000.hnat: wan = eth1
[   15.473135] mediatek_soc_hnat 1b100000.hnat: lan = eth0
[   15.478590] mediatek_soc_hnat 1b100000.hnat: ppd = eth0
[   15.483914] mediatek_soc_hnat 1b100000.hnat: gmac num = 2
[   15.490019] mediatek_soc_hnat 1b100000.hnat: FOE entry number = 8192
[   15.496965] mediatek_soc_hnat 1b100000.hnat: hwnat start
[   15.619017] Netfilter messages via NETLINK v0.30.
[   15.639981] xt_time: kernel timezone is -0000
[   15.645614] clink: Unknown symbol wifi_led_2g_update (err 0)
[   15.651666] clink: Unknown symbol wifi_led_5g_update (err 0)
[   16.555135] register mt_drv
[   16.558302] mt_drv 0001:01:00.0: enabling device (0000 -> 0002)
[   16.570298]
[   16.570298]
[   16.570298] === pAd = ffffff8009901000, size = 13398784 ===
[   16.570298]
[   16.580851] <-- RTMPAllocAdapterBlock, Status=0
[   16.585390] PCI CSRBaseAddress =0xffffff8009800000, csr_addr=0xffffff8009800000!
[   16.592806] RTMPInitPCIeDevice():device_id=0x7915
[   16.597512] mt7915_init()-->
[   16.600395] Use 1st iPAiLNA default bin.
[   16.604378] <--mt7915_init()
[   16.607984] Rx[0] Ring: total 24576 bytes allocated
[   16.612944] Rx[1] Ring: total 24576 bytes allocated
[   16.618299] Rx[2] Ring: total 8192 bytes allocated
[   16.623959] Rx[3] Ring: total 16384 bytes allocated
[   16.629307] Rx[4] Ring: total 8192 bytes allocated
[   16.634119] <-- pci_alloc_tx_rx_ring_mem, Status=0
[   16.997723] mt7622_mt_wifi: module license 'Proprietary' taints kernel.
[   17.004393] Disabling lock debugging due to kernel taint
[   17.025605] register mt_drv
[   17.032179]
[   17.032179] == pAd = ffffff800ad01000, size = 6220544, Status=0 ==
[   17.039963] AP Driver version-5.0.5.4
[   17.043698] read sub id = 2
[   17.046555] Use 1st iPAiLNA default bin.
[   17.050536] Use 1st /etc_ro/wlan/MT7622_EEPROM.bin default bin.
[   17.056490] <--mt7622_init()
[   17.060123] <-- RTMPAllocTxRxRingMemory, Status=0
[   17.073154] PPP generic driver version 2.4.2
[   17.078269] PPP MPPE Compression module registered
[   17.084122] NET: Registered protocol family 24
[   17.089539] PPTP driver version 0.8.5
[   17.094459] Inserting Cameo Netlink module.
[   17.102095] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   17.108497] whnat_module_init(): module init and register callback for whnat
[   17.115745] create whnat_ctrl ok!!!
[   17.119402] wed_slot_map_get(): assign slot_id:0 for entry: 0!
[   17.125420] wed_slot_map_get(): assign slot_id:1 for entry: 1!
[   17.131428] whnat_hif_pcie_mirror_probe(): hif_cfg base addr=ffffff80097d2400
[   17.140269] kmodloader: done loading kernel modules from /etc/modules.d/*
UHTTP crt Checked
[   22.471073] device eth0 entered promiscuous mode
[   22.485524] br-lan: port 1(eth0) entered forwarding state
[   22.491016] br-lan: port 1(eth0) entered forwarding state
main init
main init
page=[/setup/index.html]
count=[43]
[   22.951249] jffs2: CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0
page=[/setup/index.html]
count=[43]
[   23.027494] jffs2: Empty flash at 0x0000fffc ends at 0x00010000
[   23.036263] jffs2: CLEANMARKER node found at 0x00010000 has totlen 0xc != normal 0x0
[   23.076572] jffs2: CLEANMARKER node found at 0x00020000 has totlen 0xc != normal 0x0
[   23.137868] jffs2: Empty flash at 0x0002fffc ends at 0x00030000
[   23.144187] jffs2: CLEANMARKER node found at 0x00030000 has totlen 0xc != normal 0x0
[   23.160490] jffs2: CLEANMARKER node found at 0x00040000 has totlen 0xc != normal 0x0
[   23.189239] jffs2: CLEANMARKER node found at 0x00050000 has totlen 0xc != normal 0x0
[   23.241586] jffs2: CLEANMARKER node found at 0x00060000 has totlen 0xc != normal 0x0
[   23.275352] jffs2: CLEANMARKER node found at 0x00070000 has totlen 0xc != normal 0x0
[   23.321857] jffs2: CLEANMARKER node found at 0x00080000 has totlen 0xc != normal 0x0
[   23.364383] jffs2: CLEANMARKER node found at 0x00090000 has totlen 0xc != normal 0x0
[   23.410071] jffs2: CLEANMARKER node found at 0x000a0000 has totlen 0xc != normal 0x0
[   23.431635] jffs2: CLEANMARKER node found at 0x000b0000 has totlen 0xc != normal 0x0
[   23.440253] jffs2: CLEANMARKER node found at 0x000c0000 has totlen 0xc != normal 0x0
[   23.462910] jffs2: CLEANMARKER node found at 0x000d0000 has totlen 0xc != normal 0x0
[   23.472227] jffs2: CLEANMARKER node found at 0x000e0000 has totlen 0xc != normal 0x0
[   23.494812] jffs2: CLEANMARKER node found at 0x000f0000 has totlen 0xc != normal 0x0
[   23.503792] jffs2: CLEANMARKER node found at 0x00100000 has totlen 0xc != normal 0x0
[   23.533421] jffs2: CLEANMARKER node found at 0x00110000 has totlen 0xc != normal 0x0
[   23.544388] jffs2: CLEANMARKER node found at 0x00120000 has totlen 0xc != normal 0x0
[   23.657519] jffs2: notice: (3264) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   24.333926] ra0: ===> main_virtual_if_open
[   24.338292] load l1profile succeed!
[   24.492303] br-lan: port 1(eth0) entered forwarding state
[   24.645328] APWdsInitialize():WdsEntry Number=4
[   24.651997] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860/RT2860_5G.dat
[   24.659498] Open file "/etc/Wireless/RT2860/RT2860_5G.dat" failed!
[   24.666101] E2pAccessMode=2
[   24.669189] SSID[0]=elecom-bf0477, EdcaIdx=0
[   24.673758] BSS0 PhyMode=14
[   24.676584] wmode_band_equal(): Band Equal!
[   24.680853] auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
[   24.689705] BandSteering=0
[   24.692478] BndStrgBssIdx=
[   24.695291] [TxPower] BAND0: 100
[   24.698895] Power Boost (CCK, OFDM): RTMPSetProfileParametersPower Boost (HT20): RTMPSetProfileParametersPower Boost (HT40): RTMPSetProfileParametersPower Boost (VHT20): RTMPSetProfileParametersPower Boost (VHT40): RTMPSetProfileParametersPower Boost (VHT80): RTMPSetProfileParametersPower Boost (VHT160): RTMPSetProfileParameters[CCKTxStream] BAND0: 4
[   24.731129] [PERCENTAGEenable] BAND0: 1
[   24.735156] [BFBACKOFFenable] BAND0: 1
[   24.738601] jffs2: CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0
[   24.747644] FragThreshold[0]=2346
[   24.751028] FragThreshold[1]=2346
[   24.754362] FragThreshold[2]=2346
[   24.757701] FragThreshold[3]=2346
[   24.763665] DfsZeroWait Support=0/0
dnsmasq
dnsmasq [br-la[   24.768211] read_etxbf: ETxBfEnCond = 1
n]
[   24.773207] read_etxbf: BSSID[0]
[   24.776741] read_etxbf: MBSS[0] ETxBfEnCond = 1
[   24.777820] jffs2: notice: (3823) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   24.806990] MAP_MODE=2
[   24.811166] If/wds0 - PeerPhyOpMode=255
[   24.815584] APWdsInitialize():WdsEntry Number=4
[   24.820121] WDS-Enable mode=0
[   24.823188] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
[   24.832933] AndesSendCmdMsg: Command type = ed, Extension command type = 48
[   24.841456] HT: WDEV[0] Ext Channel = ABOVE
[   24.845749] HT: greenap_cap = 1
[   24.848977] ChipI=7622, Value=0, pcie_aspm in profile=0
[   24.876376] ICapMode = 0
[   24.882427] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:125 (WdsNum:4, ApcliNum:1, MaxNumChipRept:16), MinMcastWcid:126
[   24.892912] Fair Queueing Scheduler Initialization...
[   24.898132] Top Init Done!
[   24.900853] Use dev_alloc_skb
[   24.904192] RX[0] DESC ffffffc019b0e000 size = 8192
[   24.909225] RX[1] DESC ffffffc019348000 size = 8192
[   24.914228] cut_through_init(): ct sw token number = 4095
[   24.919767] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   24.927516] cut_through_token_list_init(): ffffffc019745d90,ffffffc019745d90
[   24.934690] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[   24.942439] cut_through_token_list_init(): ffffffc019745db0,ffffffc019745db0
[   24.949548] Hif Init Done!
[   24.952248] ctl->txq = ffffff800b2e93f0
[   24.956092] ctl->rxq = ffffff800b2e9408
[   24.959932] ctl->ackq = ffffff800b2e9420
[   24.963858] ctl->kickq = ffffff800b2e9438
[   24.967870] ctl->tx_doneq = ffffff800b2e9450
[   24.972141] ctl->rx_doneq = ffffff800b2e9468
[   24.976566] mt_rbus 0000:00:00.0: Direct firmware load for mt7622_patch_e2_hdr.bin failed with error -2
[   24.985974] Parsing patch header
[   24.989206]  Built date: 20200724205908a
[   24.993211]
[   24.994693]  Platform: ALPS
[   24.997517]  HW/SW version: 0x8a108a10
[   25.001300]  Patch version: 0x00000010
[   25.005085]  Target address: 0x9c000, length: 82080
[   25.010060] patch is not ready && get semaphore success
[   25.015325] EventGenericEventHandler: CMD Success
[   25.020535] MtCmdPatchFinishReq
[   25.034921] EventGenericEventHandler: CMD Success
[   25.039670] release patch semaphore
[   25.043165] WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
[   25.049446] Parsing CPU 0 fw tailer
[   25.052937]  Chip ID: 0x06
[   25.055649]  Eco version: 0x00
[   25.058722]  Region number: 0x00
[   25.061970]  Format version: 0x00
[   25.065303]  Ram version: _reserved_
[   25.068935]  Built date: 20200724210254
[   25.072937]  Common crc: 0x0
[   25.075810] Parsing tailer region 0
[   25.079306]  Feature set: 0x01
[   25.082377]  Target address: 0xb7000, Download size: 249856
[   25.087954] Parsing tailer region 1
[   25.091449]  Feature set: 0x01
[   25.094520]  Target address: 0x203dc00, Download size: 50144
[   25.100219] EventGenericEventHandler: CMD Success
[   25.108868] EventGenericEventHandler: CMD Success
[   25.113928] MtCmdFwStartReq: override = 0x0, address = 0x0
[   25.160915] EventGenericEventHandler: CMD Success
[   25.165640] MCU Init Done!
[   25.168443] efuse_probe: efuse = 2
[   25.171852] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[   25.177259] RtmpEepromGetDefault::e2p_dafault=2
[   25.181797] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[   25.189374] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0]
[   25.196248] NICReadEEPROMParameters: EEPROM 0x52 bb08
[   25.202092] MtCmdSetTxLpfCal_7622:(ret = 0)
[   25.206320] MtCmdSetTxDcIqCal_7622:(ret = 0)
[   25.210624] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.214839] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.219052] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.223260] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.227472] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.231681] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.235893] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.240101] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.244314] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.248523] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.252733] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.256942] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.261152] MtCmdSetTxDpdCal_7622:(ret = 0)
[   25.265341] mt7622_pa_lna_set(): read antCtrl = 0, polCtrl = 4, wifiStreams = 44
[   25.272744] mt7622_tssi_set(): nic_cfg1=20, mode=1
[   26.242321] Country Region from e2p = 0
[   26.246190] read sub id = 2
[   26.249206] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
[   26.254446] RcRadioInit(): pRadioCtrl=ffffffc01e1b2db0,Band=0,rfcap=1,channel=1,PhyMode=2 extCha=0xf
[   26.263588] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
[   26.279215] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
[   26.285127] EEPROM Init Done!
[   26.288093] mt_mac_init()-->
[   26.290999] mt7622_init_mac_cr(): TMAC_TRCR0=0x82783c8c
[   26.296248] <--mt_mac_init()
[   26.317727] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   26.334793] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   26.351858] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   26.358394] MAC Init Done!
[   26.361128] MT7622BBPInit() todo
[   26.364363] PHY Init Done!
[   26.367645] MtCmdSetMacTxRx:(ret = 0)
[   26.371431] ap_ftkd> Initialize FT KDP Module...
[   26.376073] Main bssid = 00:00:00:00:00:00
[   26.380342] MtCmdSetMacTxRx:(ret = 0)
[   26.391295] MtCmdSetMacTxRx:(ret = 0)
[   26.394964] <==== mt_wifi_init, Status=0
[   26.398894] TxBfModuleEnCtrl:It's not DBDC mode
[   26.403457] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
[   26.408542] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[   26.416389] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[   26.424612] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[   26.434518] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[   26.442975] Total allocated 4 WDS interfaces!
[   26.448122] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:125 (WdsNum:4, ApcliNum:1, MaxNumChipRept:16), MinMcastWcid:126
[   26.483793] RedInit: set Driver/N9 RED Enable to 1.
[   26.488742] RedInit: RED Initiailize Done.
[   26.492882] cp_support_is_enabled: set Driver CP_SUPPORT to Mode 2.
[   26.500020] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
[   26.507647] wifi_sys_open(), wdev idx = 0
[   26.511768] wdev_attr_update(): wdevId0 = 04:ab:18:**:**:79
[   26.517416] [RcGetHdevByPhyMode] channel 0 fix for rdev fetching
[   26.523807]  [RadarStateCheck] RD_NORMAL_MODE
[   26.529602] phy_freq_adjust : no prim_ch value for adjust!
[   26.535375] Caller: wlan_operate_init+0xd8/0x108 [mt7622_mt_wifi]
[   26.541527] phy_mode=14, ch=0, wdev_type=1
[   26.545686] ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=0
[   26.555160] ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
[   26.563772] AP inf up for ra_0(func_idx) OmacIdx=0
[   26.570998] mtd_isr::DriverOwn = TRUE
[   26.575470] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
[   26.587399] ApAutoChannelAtBootUp----------------->
[   26.592361] ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1
[   26.598219] MtCmdSetMacTxRx:(ret = 0)
[   26.601952] MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0
[   26.610987] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   26.868419] MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0
[   26.877642] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   27.148374] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
[   27.158838] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   27.420407] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
[   27.432672] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   27.680419] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[   27.689416] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   27.952421] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
[   27.961495] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   28.200420] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
[   28.209996] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   28.444428] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[   28.453744] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   28.732324] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[   28.741318] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   28.948317] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
[   28.957460] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   29.164315] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
[   29.173449] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   29.380310] ====================================================================
[   29.387730] Channel   1 : Busy Time =   4980, Skip Channel = FALSE, BwCap = TRUE
[   29.395135] Channel   2 : Busy Time =   5173, Skip Channel = FALSE, BwCap = TRUE
[   29.402536] Channel   3 : Busy Time =   2569, Skip Channel = FALSE, BwCap = TRUE
[   29.409934] Channel   4 : Busy Time =   6714, Skip Channel = FALSE, BwCap = TRUE
[   29.417332] Channel   5 : Busy Time =   5929, Skip Channel = FALSE, BwCap = TRUE
[   29.424730] Channel   6 : Busy Time =   6267, Skip Channel = FALSE, BwCap = TRUE
[   29.432147] Channel   7 : Busy Time =   6457, Skip Channel = FALSE, BwCap = TRUE
[   29.439564] Channel   8 : Busy Time =   4529, Skip Channel = FALSE, BwCap = TRUE
[   29.446963] Channel   9 : Busy Time =   2613, Skip Channel = FALSE, BwCap = TRUE
[   29.454362] Channel  10 : Busy Time =   4109, Skip Channel = FALSE, BwCap = TRUE
[   29.461760] Channel  11 : Busy Time =   5167, Skip Channel = FALSE, BwCap = TRUE
[   29.469155] ====================================================================
[   29.476665] Rule 3 Channel Busy time value : Select Primary Channel 3
[   29.483113] Rule 3 Channel Busy time value : Min Channel Busy = 2569
[   29.489470] Rule 3 Channel Busy time value : BW = 20
[   29.494442] [SelectClearChannelBusyTime] - band0 END
[   29.499413] ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 3, IsAband = 0
[   29.507943]  AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 14, Channel = 3
[   29.518051] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[   29.527014] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[   29.551087] ApAutoChannelAtBootUp<-----------------
[   29.556008] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   29.561894] wifi_sys_linkup(), wdev idx = 0
[   29.566089] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
[   29.566089]  LinkToOmacIdx = 0, LinkToWdevType = 1
[   29.628000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
[   29.687762] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
[   29.693535] APStartUpForMbss: BssIndex = 0 channel = 3
[   29.698779] MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
[   29.704660] TxCCKStreamCtrl: set wrong parameters
[   29.711251] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
[   29.724102] MtCmdSetMacTxRx:(ret = 0)
[   29.727868] MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0
[   29.736834] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   29.763793] AP OBSS SYNC - BBP R4 to 20MHz.l
[   30.064313] MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0
[   30.073315] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   30.097425] AP OBSS SYNC - BBP R4 to 20MHz.l
[   30.400311] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
[   30.409270] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   30.433360] AP OBSS SYNC - BBP R4 to 20MHz.l
[   30.736305] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
[   30.745267] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   30.769356] AP OBSS SYNC - BBP R4 to 20MHz.l
[   31.072304] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[   31.081292] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   31.105380] AP OBSS SYNC - BBP R4 to 20MHz.l
[   31.408303] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
[   31.417262] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   31.441367] AP OBSS SYNC - BBP R4 to 20MHz.l
[   31.744312] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
[   31.753274] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   31.777378] AP OBSS SYNC - BBP R4 to 20MHz.l
[   32.080324] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[   32.089301] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   32.113428] AP OBSS SYNC - BBP R4 to 20MHz.l
[   32.416306] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[   32.425268] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   32.433556] AP OBSS SYNC - BBP R4 to 20MHz.l
[   32.736312] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
[   32.745449] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[   32.753713] AP OBSS SYNC - BBP R4 to 20MHz.l
[   33.060317] Channel[Idx=0, Ch=1].bEffectedChannel=0x2!
[   33.065471] needFallBack=TRUE due to OP/OT!
[   33.069679] Channel[Idx=1, Ch=2].bEffectedChannel=0x2!
[   33.074821] needFallBack=TRUE due to OP/OT!
[   33.079007] Channel[Idx=2, Ch=3].bEffectedChannel=0x2!
[   33.084150] Channel[Idx=3, Ch=4].bEffectedChannel=0x4!
[   33.089293] needFallBack=TRUE due to OP/OT!
[   33.093492] Channel[Idx=4, Ch=5].bEffectedChannel=0x2!
[   33.098634] needFallBack=TRUE due to OP/OT!
[   33.102820] Channel[Idx=5, Ch=6].bEffectedChannel=0x2!
[   33.107961] needFallBack=TRUE due to OP/OT!
[   33.112149] Channel[Idx=6, Ch=7].bEffectedChannel=0x1!
[   33.117291] Channel[Idx=7, Ch=8].bEffectedChannel=0x2!
[   33.122437] needFallBack=TRUE due to OP/OT!
[   33.126623] Channel[Idx=8, Ch=9].bEffectedChannel=0x0!
[   33.131764] Channel[Idx=9, Ch=10].bEffectedChannel=0x4!
[   33.136991] needFallBack=TRUE due to OP/OT!
[   33.141197] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[   33.150161] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[   33.174285] apidx 0 for WscUUIDInit
[   33.177781] Generate UUID for apidx(0)
[   33.181615] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[   33.191802] add tx_src: 04:ab:18:**:**:79
[   33.195978] add tx_src: 02:ab:18:bf:04:79
[   33.200406] nf_unregister_hooks()
[   33.206003] no net device found for ra1 or apcli0
[   33.210737] no net device found for ra2 or apcli0
[   33.217705] no net device found for ra3 or apcli0
[   33.222547] no net device found for ra4 or apcli0
[   33.228039] no net device found for ra5 or apcli0
[   33.232832] no net device found for ra6 or apcli0
[   33.237582] no net device found for ra7 or apcli0
[   33.242322] no net device found for ra8 or apcli0
[   33.247931] no net device found for ra9 or apcli0
[   33.254893] no net device found for ra10 or apcli0
start ddns[   33.260444] device ra0 entered promiscuous mode

add_cron
[   33.265693] no net device found for ra11 or apcli0
add_cron data
[   33.271539] br-lan: port 2(ra0) entered forwarding state
[   33.277955] br-lan: port 2(ra0) entered forwarding state
[   33.283819] no net device found for ra12 or apcli0
[   33.288711] no net device found for ra13 or apcli0
[   33.294679] no net device found for ra14 or apcli0
[   33.301856] no net device found for ra15 or apcli0
[   33.306774] Mac: 04:ab:18:**:**:79 was aleady existed.
[   33.767330] Device Instance
[   33.770164]  WDEV 00:, Name:ra0, Wdev(list) Idx:0
[   33.774908]           Idx:9
[   33.777120] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[   33.785222]
[   33.786705]
[   33.788187]
[   33.789684]
[   33.791167]
[   33.792689]
[   33.794172]
[   33.795654]
[   33.797152]
[   33.798636]
[   33.800118]
[   33.801613]
[   33.803098]
[   33.804625]
[   33.806108]
[   33.884122] rai0: ===> main_virtual_if_open
[   33.888427] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_INIT
[   33.895262] load l1profile succeed!
[   33.898926] WHNAT=0
[   33.901041] whnat_cap_support(): chip_id=7915 is in WHNAT support list
[   33.907573] whnat_driver_init(): chip not enable wifi hardware nat feature!
[   33.914574] mt_service_open: wlan service opens successfully!
[   33.921408] APWdsInitialize():WdsEntry[0~15]
[   33.927108] BssidNum=1
[   33.929476] Pf2MbssIdxMap:
[   33.932175]  0
[   33.934636] E2pAccessMode=2
[   33.937706] SSID[0]=elecom-bf0477, EdcaIdx=0
[   33.942168] RTMPSetProfileParameters(): DBDC Mode=0, eDBDC_mode = 0
[   33.948660] cfg_mode=17
[   33.951098] cfg_mode=17
[   33.953550] cfg_mode=17
[   33.955994] wmode_band_equal(): Band Equal!
[   33.960380] auto_ch_select_set_cfg(): BandIdx0, AutoChannelAtBootup=1, AutoChannelAlg = 3
[   33.968558] auto_ch_select_set_cfg(): BandIdx1, AutoChannelAtBootup=0, AutoChannelAlg = 0
[   33.976828] Index0 Channel=0
[   33.980190] BandSteering=0
[   33.982941] BndStrgBssIdx=
[   33.985760] [TxPower] BAND0: 100
[   33.991056] [SKUenable] BAND0: 1
[   33.994414] [SkuTableIdx]: 0
[   33.997407] [CCKTxStream] BAND0: 4
[   34.000898] [PERCENTAGEenable] BAND0: 1
[   34.004774] [BFBACKOFFenable] BAND0: 1
[   34.008575] [Disable160RuMu] BAND0: 1
[   34.012318] [MaxRuOfdma] BAND0: 8
[   34.015703] [MaxDLMuMimo] BAND0: 4
[   34.019189] [MaxULMuMimo] BAND0: 2
[   34.023078] profile: FragThreshold[0]=2346
[   34.027566] APEdca0
[   34.029815] APEdca1
[   34.032050] APEdca2
[   34.034298] APEdca3
[   34.037500] UAPSDCapable[0]=1
[   34.040475] UAPSDCapable[1]=1
[   34.043435] UAPSDCapable[2]=1
[   34.046409] UAPSDCapable[3]=1
[   34.049380] UAPSDCapable[4]=1
[   34.052351] UAPSDCapable[5]=1
[   34.055310] UAPSDCapable[6]=1
[   34.058286] UAPSDCapable[7]=1
[   34.061257] UAPSDCapable[8]=1
[   34.064216] UAPSDCapable[9]=1
[   34.067189] UAPSDCapable[10]=1
[   34.070247] UAPSDCapable[11]=1
[   34.073304] UAPSDCapable[12]=1
[   34.076365] UAPSDCapable[13]=1
[   34.079411] UAPSDCapable[14]=1
[   34.082471] UAPSDCapable[15]=1
[   34.085531] UAPSDCapable[16]=1
[   34.088589] UAPSDCapable[17]=1
[   34.091635] UAPSDCapable[18]=1
[   34.094708] UAPSDCapable[19]=1
[   34.097767] UAPSDCapable[20]=1
[   34.100824] UAPSDCapable[21]=1
[   34.103870] UAPSDCapable[22]=1
[   34.106929] UAPSDCapable[23]=1
[   34.109987] UAPSDCapable[24]=1
[   34.113044] UAPSDCapable[25]=1
[   34.116090] UAPSDCapable[26]=1
[   34.119149] UAPSDCapable[27]=1
[   34.122207] UAPSDCapable[28]=1
[   34.125263] UAPSDCapable[29]=1
[   34.128322] UAPSDCapable[30]=1
[   34.131368] UAPSDCapable[31]=1
[   34.134427] default ApCliUAPSDCapable[0]=1
[   34.138526] default ApCliUAPSDCapable[1]=1
[   34.143305] DfsZeroWait Support=0/0
[   34.147124] DfsZeroWaitCacTime=255/255
[   34.151324] read_itxbf: ITxBfEn = 0
[   34.154817] read_itxbf: BSSID[0]
[   34.158058] read_itxbf: MBSS[0] ITxBfEn = 0
[   34.162251] read_itxbf: Common.ITxBfEn = 0
[   34.166408] read_etxbf: ETxBfEnCond = 1
[   34.170249] read_etxbf: BSSID[0]
[   34.173486] read_etxbf: MBSS[0] ETxBfEnCond = 1
[   34.178221] HeraStbcPriority[0] = 0
[   34.182702] MBSS[0] MuOfdmaDlEnable = 1
[   34.186685] MBSS[0] MuOfdmaUlEnable = 1
[   34.190666] MBSS[0] MuMimoDlEnable = 1
[   34.194576] MBSS[0] MuMimoUlEnable = 1
[   34.212787] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
[   34.218442] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[   34.224104] [PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
[   34.230717] MAP_MODE=2
[   34.233135] ApCliEntry[0].Enable=0
[   34.238088] APCLI[0] ApCliMuOfdmaDlEnable = 1
[   34.242481] APCLI[0] ApCliMuOfdmaUlEnable = 0
[   34.246874] APCLI[0] ApCliMuMimoDlEnable = 0
[   34.251181] APCLI[0] ApCliMuMimoUlEnable = 0
[   34.255783] rtmp_read_wds_from_file(): WDS Profile
[   34.260723] WDS Number: band[0]=0, band[1]=0
[   34.265131] WDS-Enable mode=0
[   34.268368] If/wds0 - PeerPhyMode=0xb1
[   34.273906] HT_BAWinSize: wdev[0]: (TX=256, RX=256)
[   34.279088] HT: WDEV[0] Ext Channel = ABOVE
[   34.283387] HT: greenap_cap = 0
[   34.286642] 0:rai0 TWTsupport = 1
[   34.340639] ICapMode = 0
[   34.348634] WtcSetMaxStaNum: MaxStaNum:237, BssidNum:1, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:286
[   34.358911] Top Init Done!
[   34.361645] Use dev_alloc_skb
[   34.364620] token_tx_queue_init(): ct sw token number = 8191
[   34.370720] token_tx_queue_init(): token que inited done!id_head/tail=0/8192
[   34.377775] token_tx_queue_init(): ffffffc01720ce08,ffffffc01720ce08
[   34.385320] TxRing[0]: attr:0, total 2048 entry initialized
[   34.391711] TxRing[1]: attr:0, total 2048 entry initialized
[   34.397450] RX[0] DESC ffffff8009744000 size = 24576
[   34.403479] RX[1] DESC ffffff800974b000 size = 24576
[   34.409500] RX[2] DESC ffffff8009752000 size = 8192
[   34.414725] RX[3] DESC ffffff8009755000 size = 16384
[   34.420369] RX[4] DESC ffffff800975a000 size = 8192
[   34.425758] -->TX_RING_0[0xd7300]: Attr:0, Base=0x5b3f0000, Cnt=2048!
[   34.432212] -->TX_RING_1[0xd7310]: Attr:0, Base=0x5b3f8000, Cnt=2048!
[   34.438658] -->TX_RING_2[0xd5400]: Attr:3, Base=0x5b3b2000, Cnt=128!
[   34.445016] -->TX_RING_3[0xd5410]: Attr:2, Base=0x5b3b3000, Cnt=256!
[   34.451378] -->TX_RING_4[0xd5440]: Attr:1, Base=0x5a284000, Cnt=256!
[   34.457735] -->RX_RING0[0xd4500]: Base=0x5a2b8000, Cnt=1536
[   34.463314] -->RX_RING1[0xd4510]: Base=0x5a2e0000, Cnt=1536
[   34.468891] -->RX_RING2[0xd5500]: Base=0x5a2a2000, Cnt=512
[   34.474381] -->RX_RING3[0xd7410]: Base=0x59e08000, Cnt=1024
[   34.479958] -->RX_RING4[0xd5520]: Base=0x59e0c000, Cnt=512
[   34.485447] whnat_ring_init(): cookie=ffffff8009901000
[   34.490589] whnat_ring_init(): whnat can't find for cookie:ffffff8009901000
[   34.497573] Hif Init Done!
[   34.503402] pci_driver_own_by_port: success to clear p=0 fw own, from(1): 1 is interrupt mode, 2 is polling mode.
[   34.513661] driver_own: port=1 is not enabled
[   34.518024] fw_prepare():using E2 ROM patch
[   34.522212] fw_prepare():using E2 RAM
[   34.525889] Parsing patch header
[   34.529123]  Built date: 20201016112241a
[   34.533124]
[   34.534606]  Platform: ALPS
[   34.537430]  HW/SW version: 0x8a108a10
[   34.541211]  Patch version: 0xffffffff
[   34.544995]  Section num: 0x2, subsys: 0x4
[   34.549099]  Section 0: type = 0x30002, offset = 0xe0, size = 0xfc90
[   34.555458]  Target address: 0x200000, length: 0xfc90
[   34.560512]  Section 1: type = 0x30002, offset = 0xfd70, size = 0x13720
[   34.567135]  Target address: 0xe000f000, length: 0x13720
[   34.572643] Patch SEM Status = 2
[   34.575889] patch is not ready && get semaphore success
[   34.581130] Start address = 0x200000, DL length = 64656, Data mode = 0x80000000
[   34.589607] EventGenericEventHandler: CMD Success
[   34.594346] MtCmdAddressLenReq:(ret = 0)
[   34.598784] Start address = 0xe000f000, DL length = 79648, Data mode = 0x80000000
[   34.607452] EventGenericEventHandler: CMD Success
[   34.612180] MtCmdAddressLenReq:(ret = 0)
[   34.616692] MtCmdPatchFinishReq
[   34.623646] EventGenericEventHandler: CMD Success
[   34.628514] Patch SEM Status = 3
[   34.631755] release patch semaphore
[   34.635248]  WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
[   34.642405] Parsing CPU 0 fw tailer
[   34.645900]  Chip ID: 0x0b
[   34.648623]  Eco version: 0x01
[   34.651681]  Region number: 0x07
[   34.654928]  Format version: 0x02
[   34.658261]  Format flag: 0x01
[   34.661333]  Ram version: ____000000
[   34.664965]  Built date: 20201016112316
[   34.668971]  Common crc: 0xc03cfb90
[   34.672469] Parsing tailer region 0
[   34.675949]  Decomp crc: 0x0
[   34.678836]  Decomp size: 0x0
[   34.681810]  Decomp block size: 0x0
[   34.685304]  Target address: 0x21fc00
[   34.688968]  Download size: 110592
[   34.692373]  Feature set: 0x20
[   34.695433] Parsing tailer region 1
[   34.698931]  Decomp crc: 0x0
[   34.701816]  Decomp size: 0x0
[   34.704785]  Decomp block size: 0x0
[   34.708264]  Target address: 0x31dc00
[   34.711931]  Download size: 205824
[   34.715335]  Feature set: 0x00
[   34.718405] Parsing tailer region 2
[   34.721899]  Decomp crc: 0x0
[   34.724783]  Decomp size: 0x0
[   34.727743]  Decomp block size: 0x0
[   34.731235]  Target address: 0x417400
[   34.734900]  Download size: 31744
[   34.738217]  Feature set: 0x00
[   34.741286] Parsing tailer region 3
[   34.744781]  Decomp crc: 0x0
[   34.747654]  Decomp size: 0x0
[   34.750627]  Decomp block size: 0x0
[   34.754119]  Target address: 0xe0022800
[   34.757957]  Download size: 395776
[   34.761360]  Feature set: 0x00
[   34.764432] Parsing tailer region 4
[   34.767913]  Decomp crc: 0x0
[   34.770799]  Decomp size: 0x0
[   34.773776]  Decomp block size: 0x0
[   34.777289]  Target address: 0xe0083200
[   34.781138]  Download size: 347648
[   34.784544]  Feature set: 0x00
[   34.787602] Parsing tailer region 5
[   34.791097]  Decomp crc: 0x0
[   34.793982]  Decomp size: 0x0
[   34.796964]  Decomp block size: 0x0
[   34.800457]  Target address: 0x23ac00
[   34.804110]  Download size: 87040
[   34.807455]  Feature set: 0x00
[   34.810528] Parsing tailer region 6
[   34.814023]  Decomp crc: 0x0
[   34.816908]  Decomp size: 0x0
[   34.819867]  Decomp block size: 0x0
[   34.823360]  Target address: 0x400000
[   34.827023]  Download size: 81920
[   34.830340]  Feature set: 0x00
[   34.833409]  Release info: header tag = 0, total length = 68
[   34.839081]  tag 1, padding length = 3, tag length = 61
[   34.844307]  payload: t-neptune-main-mt7915-1953-MT7915D_1953_MT7621-20201016111902
[   34.852262] Start address = 0x21fc00, DL length = 110592, Data mode = 0x80000000
[   34.860867] EventGenericEventHandler: CMD Success
[   34.865589] MtCmdAddressLenReq:(ret = 0)
[   34.870202] Start address = 0x31dc00, DL length = 205824, Data mode = 0x80000000
[   34.878794] EventGenericEventHandler: CMD Success
[   34.883521] MtCmdAddressLenReq:(ret = 0)
[   34.888725] Start address = 0x417400, DL length = 31744, Data mode = 0x80000000
[   34.897245] EventGenericEventHandler: CMD Success
[   34.901966] MtCmdAddressLenReq:(ret = 0)
[   34.906086] Start address = 0xe0022800, DL length = 395776, Data mode = 0x80000000
[   34.914880] EventGenericEventHandler: CMD Success
[   34.919615] MtCmdAddressLenReq:(ret = 0)
[   34.926078] Start address = 0xe0083200, DL length = 347648, Data mode = 0x80000000
[   34.934845] EventGenericEventHandler: CMD Success
[   34.939570] MtCmdAddressLenReq:(ret = 0)
[   34.945709] Start address = 0x23ac00, DL length = 87040, Data mode = 0x80000000
[   34.954204] EventGenericEventHandler: CMD Success
[   34.958929] MtCmdAddressLenReq:(ret = 0)
[   34.963391] Start address = 0x400000, DL length = 81920, Data mode = 0x80000000
[   34.971899] EventGenericEventHandler: CMD Success
[   34.976625] MtCmdAddressLenReq:(ret = 0)
[   34.981057] MtCmdFwStartReq: override = 0x1, address = 0x21fc00
[   34.988171] EventGenericEventHandler: CMD Success
[   34.992901] Parsing CPU 1 fw tailer
[   34.996414]  Chip ID: 0x00
[   34.999126]  Eco version: 0x01
[   35.002201]  Region number: 0x03
[   35.005446]  Format version: 0x02
[   35.008780]  Format flag: 0x01
[   35.011838]  Ram version: DEV_000000
[   35.015470]  Built date: 20200814164415
[   35.019472]  Common crc: 0x1110cdc1
[   35.022968] Parsing tailer region 0
[   35.026460]  Decomp crc: 0x0
[   35.029344]  Decomp size: 0x0
[   35.032315]  Decomp block size: 0x0
[   35.035794]  Target address: 0x10200000
[   35.039634]  Download size: 88016
[   35.042951]  Feature set: 0x00
[   35.046022] Parsing tailer region 1
[   35.049516]  Decomp crc: 0x0
[   35.052400]  Decomp size: 0x0
[   35.055359]  Decomp block size: 0x0
[   35.058853]  Target address: 0x10300000
[   35.062691]  Download size: 19408
[   35.066008]  Feature set: 0x00
[   35.069078] Parsing tailer region 2
[   35.072572]  Decomp crc: 0x0
[   35.075447]  Decomp size: 0x0
[   35.078418]  Decomp block size: 0x0
[   35.081911]  Target address: 0xe0000000
[   35.085749]  Download size: 8768
[   35.088978]  Feature set: 0x00
[   35.092036]  Release info: header tag = 0, total length = 0
[   35.097635] Start address = 0x10200000, DL length = 88016, Data mode = 0x80000010
[   35.106315] EventGenericEventHandler: CMD Success
[   35.111043] MtCmdAddressLenReq:(ret = 0)
[   35.115504] Start address = 0x10300000, DL length = 19408, Data mode = 0x80000010
[   35.124224] EventGenericEventHandler: CMD Success
[   35.128962] MtCmdAddressLenReq:(ret = 0)
[   35.132997] Start address = 0xe0000000, DL length = 8768, Data mode = 0x80000010
[   35.141607] EventGenericEventHandler: CMD Success
[   35.146331] MtCmdAddressLenReq:(ret = 0)
[   35.150329] MtCmdFwStartReq: override = 0x4, address = 0x0
[   35.256090] EventGenericEventHandler: CMD Success
[   35.260831] MCU Init Done!
[   35.263540] efuse_probe: efuse = 10000012
[   35.267558] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
[   35.272961] RtmpEepromGetDefault::e2p_dafault=1
[   35.277495] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
[   35.285066] br-lan: port 2(ra0) entered forwarding state
[   35.290437] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x5000]
[   35.296472] rtmp_nv_init(): EEPROM Size[131072]
[   35.302226] [EEPROMImage - PreCalImageInfo - PreCalImage - TxDPDImage]
[   35.302226] [0xffffffc016760000 - 0xffffffc016760e00 - 0xffffffc016760e10 - 0xffffffc01676d220]
[   35.318858] validFlashEepromID(): eeFlashId=7915, pAd->ChipID=7915
[   35.325835] [d-die version:1]
[   35.361985] [a-die version:2]
[   35.490435]
[   35.491933] NICReadEEPROMParameters: EEPROM 0x62 7
[   35.497439] NICReadEEPROMParameters: Group Pre-Cal finished, load Group Pre-Cal data
[   35.506033] NICReadEEPROMParameters: DPD 5G Pre-Cal finished!
[   35.511810] NICReadEEPROMParameters: DPD 2G Pre-Cal finished!
[   35.656010] Country Region from e2p = 0
[   35.659867] antenna_default_reset() todo
[   35.663804] antenna_default_reset() value = 0x2424, TxPath = 4, RxPath = 4
[   35.670686] RTMPReadTxPwrPerRate(458): Don't Support this now!
[   35.676523] rc_radio_init(): DBDC MODE=0, ConcurrentBand=1
[   35.682018] rc_radio_init(): radio_ctrl=ffffffc01b3e9ee0,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
[   35.691329] ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0
[   35.697102] AntCfgInit(2765): Not support for HIF_MT yet!
[   35.702518] mt7915_check_RF_lock_down: RFlockDown Enable: 0
[   35.708095] MtReadPwrLimitTable: sku table idx: 0
mt7915_check_RF_lock_down: RFlockDown Enable: 0
[   35.720219] mt7915_check_RF_lock_down: RFlockDown Enable: 0
[   35.725800] MtReadPwrLimitTable: sku table idx: 0
mt7915_check_RF_lock_down: RFlockDown Enable: 0
[   35.738055] EEPROM Init Done!
[   35.741050] mac_init()-->
[   35.743664] init_mac_cr()-->
[   35.746568] <--mac_init()
[   35.752303] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   35.760600] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   35.768884] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[   35.775447] MAC Init Done!
[   35.778170] BBPInit():BBP Initialization.....
[   35.782537]  Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
[   35.791588]  Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
[   35.800651] BBPInit() todo
[   35.803350] PHY Init Done!
[   35.809244] tx_pwr_comp_init():NotSupportYet!
[   35.813802] MtCmdSetMacTxRx:(ret = 0)
[   35.817793] ap_ftkd> Initialize FT KDP Module...
[   35.822472] Main bssid = 00:00:00:00:00:00
[   35.826577] SetMuruPlatformTypeProc: param.ucPlatformType = 2
[   35.832378] muru_cfg_dlul_limits:(Ret = 1
[   35.836419] muru_cfg_dlul_limits:(Ret = 1
[   35.840660] MtCmdSetMacTxRx:(ret = 0)
[   35.844341] <==== mt_wifi_init, Status=0
[   35.848255] TxBfModuleEnCtrl:It's not DBDC mode
[   35.852845] CmdHeraStbcPriorityCtrl: u1BandIdx=0, u1Operation=1, u1StbcPriority=0
[   35.860364] MSTA_Init (1) ---> ApCli
[   35.863969] Register MSTA IF (apclii0) , pAd->MSTANum = 1
[   35.869684] Caller: RTMPSetHT+0x2d0/0x328 [mt_wifi]
[   35.874586]
[   35.874586] phy_mode=177, ch=0, wdev_type=2
[   35.880253] ht_cap: ht_cap->HtCapInfo,
[   35.884092] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[   35.891750] ht_cap: ht_cap->HtCapParm,
[   35.895597] mdpu_density=0, ampdu_factor=3
[   35.900339] mt_service_init: wlan service inits successfully!
[   35.906187] WtcSetMaxStaNum: MaxStaNum:237, BssidNum:1, WdsNum:16, MSTANum:1, MaxNumChipRept:32, MinMcastWcid:286
[   36.039069] RedInit: set CR4/N9 RED Enable to 1.
[   36.043821] RedInit: RED Initiailize Done.
[   36.048455] cp_support_is_enabled: set Driver CP_SUPPORT to Mode 2.
[   36.054794] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
[   36.061122] wifi_sys_open(), wdev idx = 0
[   36.065205] ucAction = 0, ucBandIdx = 0, ucSmthIntlBypass = 0
[   36.071145] BuildChannelList() BandIdx = 0, PhyMode = 177, ChListNum = 20:
[   36.078195] DfsBuildChannelList(): Done
[   36.082309] phy_oper_init(): operate TxStream = 4, RxStream = 4
[   36.088432]  [RadarStateCheck] RD_NORMAL_MODE
[   36.094038] phy_freq_adjust : no prim_ch value for adjust!
[   36.099932] Caller: wlan_operate_init+0xf4/0x120 [mt_wifi]
[   36.105777]
[   36.105777] phy_mode=177, ch=0, wdev_type=1
[   36.111775] ht_cap: ht_cap->HtCapInfo,
[   36.115712] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[   36.123444] ht_cap: ht_cap->HtCapParm,
[   36.127367] mdpu_density=5, ampdu_factor=3
[   36.131666] wdev_attr_update(): wdevId0 = 04:ab:18:**:**:7a
[   36.137594] AP inf up for ra_0(func_idx) OmacIdx=0
[   36.142588] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
[   36.148184] ApAutoChannelAtBootUp----------------->
[   36.153143] ApAutoChannelAtBootUp: AutoChannelBootup[0] = 1
[   36.159067] MtCmdSetMacTxRx:(ret = 0)
[   36.162832] [AutoChSelBuildChannelListFor5G] ChListNum5G = 20
[   36.168776] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   36.176960] MtCmdChannelSwitch: ctrl_chl=36, ctrl_ch2=0, cent_ch=36 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   36.203317] MtCmdSetTxRxPath: ctrl_chl=36, ctrl_ch2=0, cent_ch=36, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   36.424500] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   36.432577] MtCmdChannelSwitch: ctrl_chl=40, ctrl_ch2=0, cent_ch=40 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   36.458664] MtCmdSetTxRxPath: ctrl_chl=40, ctrl_ch2=0, cent_ch=40, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   36.668529] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   36.676618] MtCmdChannelSwitch: ctrl_chl=44, ctrl_ch2=0, cent_ch=44 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   36.702706] MtCmdSetTxRxPath: ctrl_chl=44, ctrl_ch2=0, cent_ch=44, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   36.912556] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   36.920656] MtCmdChannelSwitch: ctrl_chl=48, ctrl_ch2=0, cent_ch=48 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   36.946743] MtCmdSetTxRxPath: ctrl_chl=48, ctrl_ch2=0, cent_ch=48, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   37.156520] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   37.164637] MtCmdChannelSwitch: ctrl_chl=52, ctrl_ch2=0, cent_ch=52 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   37.190767] MtCmdSetTxRxPath: ctrl_chl=52, ctrl_ch2=0, cent_ch=52, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   37.400513] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   37.408592] MtCmdChannelSwitch: ctrl_chl=56, ctrl_ch2=0, cent_ch=56 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   37.434746] MtCmdSetTxRxPath: ctrl_chl=56, ctrl_ch2=0, cent_ch=56, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   37.644529] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   37.652639] MtCmdChannelSwitch: ctrl_chl=60, ctrl_ch2=0, cent_ch=60 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   37.678732] MtCmdSetTxRxPath: ctrl_chl=60, ctrl_ch2=0, cent_ch=60, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   37.888540] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   37.896634] MtCmdChannelSwitch: ctrl_chl=64, ctrl_ch2=0, cent_ch=64 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   37.922730] MtCmdSetTxRxPath: ctrl_chl=64, ctrl_ch2=0, cent_ch=64, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   38.132501] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   38.140612] MtCmdChannelSwitch: ctrl_chl=100, ctrl_ch2=0, cent_ch=100 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   38.166878] MtCmdSetTxRxPath: ctrl_chl=100, ctrl_ch2=0, cent_ch=100, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   38.376520] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   38.384608] MtCmdChannelSwitch: ctrl_chl=104, ctrl_ch2=0, cent_ch=104 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   38.410909] MtCmdSetTxRxPath: ctrl_chl=104, ctrl_ch2=0, cent_ch=104, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   38.620534] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   38.628697] MtCmdChannelSwitch: ctrl_chl=108, ctrl_ch2=0, cent_ch=108 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   38.654958] MtCmdSetTxRxPath: ctrl_chl=108, ctrl_ch2=0, cent_ch=108, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   38.864524] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   38.872605] MtCmdChannelSwitch: ctrl_chl=112, ctrl_ch2=0, cent_ch=112 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   38.898868] MtCmdSetTxRxPath: ctrl_chl=112, ctrl_ch2=0, cent_ch=112, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   39.108530] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   39.116625] MtCmdChannelSwitch: ctrl_chl=116, ctrl_ch2=0, cent_ch=116 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   39.142963] MtCmdSetTxRxPath: ctrl_chl=116, ctrl_ch2=0, cent_ch=116, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   39.352525] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   39.360667] MtCmdChannelSwitch: ctrl_chl=120, ctrl_ch2=0, cent_ch=120 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   39.386941] MtCmdSetTxRxPath: ctrl_chl=120, ctrl_ch2=0, cent_ch=120, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   39.596524] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   39.604644] MtCmdChannelSwitch: ctrl_chl=124, ctrl_ch2=0, cent_ch=124 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   39.630971] MtCmdSetTxRxPath: ctrl_chl=124, ctrl_ch2=0, cent_ch=124, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   39.840514] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   39.848594] MtCmdChannelSwitch: ctrl_chl=128, ctrl_ch2=0, cent_ch=128 DBDCIdx=0, ChBand=1, BW=0, TXStream=4, RXStream=4, scan(1)
[   39.874854] MtCmdSetTxRxPath: ctrl_chl=128, ctrl_ch2=0, cent_ch=128, RxPath=f, BandIdx=0, ChBand=1, BW=0,TXStream=4, RXStream=15, scan(1)
[   40.084444] ====================================================================
[   40.091855] Channel  36 : Busy Time =   1737, Skip Channel = FALSE, BwCap = TRUE
[   40.099254] Channel  40 : Busy Time =   1270, Skip Channel = FALSE, BwCap = TRUE
[   40.106652] Channel  44 : Busy Time =    642, Skip Channel = FALSE, BwCap = TRUE
[   40.114048] Channel  48 : Busy Time =    733, Skip Channel = FALSE, BwCap = TRUE
[   40.121444] Channel  52 : Busy Time =     54, Skip Channel = FALSE, BwCap = TRUE
[   40.128912] Channel  56 : Busy Time =     36, Skip Channel = FALSE, BwCap = TRUE
[   40.136310] Channel  60 : Busy Time =     43, Skip Channel = FALSE, BwCap = TRUE
[   40.143707] Channel  64 : Busy Time =      5, Skip Channel = FALSE, BwCap = TRUE
[   40.151102] Channel 100 : Busy Time =    230, Skip Channel = FALSE, BwCap = TRUE
[   40.158498] Channel 104 : Busy Time =    113, Skip Channel = FALSE, BwCap = TRUE
[   40.165897] Channel 108 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
[   40.173292] Channel 112 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
[   40.180688] Channel 116 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
[   40.188084] Channel 120 : Busy Time =    307, Skip Channel = FALSE, BwCap = TRUE
[   40.195480] Channel 124 : Busy Time =     11, Skip Channel = FALSE, BwCap = TRUE
[   40.202875] Channel 128 : Busy Time =      0, Skip Channel = FALSE, BwCap = TRUE
[   40.210270] ====================================================================
[   40.217672] Rule 3 Channel Busy time value : Select Primary Channel 108
[   40.224285] Rule 3 Channel Busy time value : Min Channel Busy = 307
[   40.230588] Rule 3 Channel Busy time value : BW = 160
[   40.235644] [SelectClearChannelBusyTime] - band0 END
[   40.240610] ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 108, IsAband = 1
[   40.249313]  [RadarStateCheck] RD_SILENCE_MODE
[   40.254813] [DfsCacNormalStart][RDM] CAC 65 seconds start . Disable MAC TX
[   40.261743] [DfsSwitchCheck]: DFS ByPass TX calibration.
[   40.267143] mt7195_find_both_central_for_bw160() : BW_160 CtrlCh [108] CentCh [114]
[   40.267143]  => PrimCentral [106] , SecCentral [122]
[   40.279753] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   40.287820] mt7915_apply_dpd_flatness_data: DPD Pre-Cal finished, load DPD Pre-Cal data
[   40.295885] MtCmdChannelSwitch: T/RX stream (4) should not be larger than 2 when BW160 is set
[   40.305105] MtCmdChannelSwitch: ctrl_chl=108, ctrl_ch2=0, cent_ch=114 DBDCIdx=0, ChBand=1, BW=3, TXStream=4, RXStream=4, scan(0)
[   40.349574] MtCmdSetTxRxPath: ctrl_chl=108, ctrl_ch2=0, cent_ch=114, RxPath=f, BandIdx=0, ChBand=1, BW=3,TXStream=4, RXStream=15, scan(0)
[   40.362171] DfsBuildChannelList(): Done
[   40.366034] zero_wait_dfs_switch_ch(): outband ch 0, ch_stat 0
[   40.371865] ApAutoChannelAtBootUp<-----------------
[   40.376749] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[   40.382857] Caller: RTMPSetHT+0x2d0/0x328 [mt_wifi]
[   40.387750]
[   40.387750] phy_mode=177, ch=108, wdev_type=1
[   40.393588] ht_cap: ht_cap->HtCapInfo,
[   40.397424] ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1
[   40.405080] ht_cap: ht_cap->HtCapParm,
[   40.408916] mdpu_density=5, ampdu_factor=3
[   40.413030] wifi_sys_linkup(), wdev idx = 0
[   40.417219] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:287 for WDEV_TYPE:1
[   40.417219]  LinkToOmacIdx = 0, LinkToWdevType = 1
[   40.430155] TRTableInsertMcastEntry:band0 group_idx[0]=0
[   40.504780] (bssUpdateChannel), ucPrimCh=108, ucCentChSeg0=114, ucCentChSeg1=0, BW=3, ucHetbRU26Disable=0, ucHetbAllDisable=1
[   40.516087] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8320, CmdBssInfoBmcRate.u2McTransmit = 8320
[   40.532520] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0 (rai0)
[   40.538882]  Band0 BcnInitedRnd = 45
[   40.542667] MtCmdTxPowerSKUCtrl: tx_pwr_sku_en: 1, BandIdx: 0
[   40.548481] MtCmdTxBfBackoffCtrl: fgTxBFBackoffEn: 1, BandIdx: 0
[   40.554548] MtCmdTxPowerPercentCtrl: fgTxPowerPercentEn: 1, BandIdx: 0
[   40.561128] TxCCKStreamCtrl: set wrong parameters
[   40.573183] set muru_update_he_cfg()!!!!
[   40.577110] PrintSrCmd:
[   40.577110] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[   40.577110] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[   40.591141] PrintSrCmd:
[   40.591141] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[   40.591141] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[   40.605217] PrintSrCmd:
[   40.605217] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[   40.605217] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[   40.619304] apidx 0 for WscUUIDInit
[   40.622796] Generate UUID for apidx(0)
[   40.626588] WDS_Init():wds_num[0]=0, count=0, MAX_WDS_ENTRY=16, if_idx=0, flg_wds_init=0
[   40.634835] Total allocated 0 WDS(es) for band0!
[   40.639469] mtk_ppe_dev_register_hook : ineterface rai0 register (2)
[   40.646607] add tx_src: 04:ab:18:**:**:7a
[   40.651354] add tx_src: 02:ab:18:bf:04:7a
[   40.655765] no net device found for rai1 or apclii0
[   40.660732] no net device found for rai2 or apclii0
[   40.660976] device rai0 entered promiscuous mode
[   40.661010] br-lan: port 3(rai0) entered forwarding state
[   40.661028] br-lan: port 3(rai0) entered forwarding state
[   40.682128] no net device found for rai3 or apclii0
[   40.688026] no net device found for rai4 or apclii0
[   40.693014] no net device found for rai5 or apclii0
[   40.698259] no net device found for rai6 or apclii0
[   40.703561] no net device found for rai7 or apclii0
[   40.708534] no net device found for rai8 or apclii0
[   40.710292] mtk_ppe_dev_register_hook : rai0 has been registered in wifi_hook_if table[2]
[   40.721882] no net device found for rai9 or apclii0
[   40.726849] no net device found for rai10 or apclii0
[   40.731917] no net device found for rai11 or apclii0
[   40.737294] no net device found for rai12 or apclii0
[   40.742363] no net device found for rai13 or apclii0
[   40.749907] no net device found for rai14 or apclii0
[   40.754998] no net device found for rai15 or apclii0
[   41.039699] Enable GAS service for MBSSID[0]
[   41.054275] Enable GAS service for MBSSID[0]
[   41.059399] Unknow Parameter:8
[   41.063092] Unknow Parameter:0
[   42.664305] br-lan: port 3(rai0) entered forwarding state
[   46.279069] Set_MapR2_Proc: MAP R2 is enabled
[   46.285398] Set_MapTS_Proc: MAP TS is enabled
[   46.295775] Set_MapR2_Proc: MAP R2 is enabled
[   46.302083] Set_MapTS_Proc: MAP TS is enabled
[   52.624173] Enable GAS service for MBSSID[0]
[   52.628953] Enable GAS service for MBSSID[0]
[   52.633252] Unknow Parameter:8
[   52.753311] Unknow Parameter:0
[   52.756408] Unknow Parameter:1
[   52.759457] Unknow Parameter:2
[   52.762873] Unknow Parameter:3
[   52.765998] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 16
[   52.771757] Set_AP_VENDOR_SPECIFIC_IE: Unknown OUIType = 9
[   52.777431] set_wapp_cmm_ie: Unknown IE(EID = 111)
[   52.782491] set_wapp_cmm_ie: Unknown IE(EID = 110)
[   52.787397] Set_HotSpot_OnOff ==> wdev[0] is already in [OFF] STATE , skip.
[   52.797776] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x0
[   52.806929] Set_Fh_Bss_Proc ra0 wdev->MAPCfg.DevOwnRole 0x20
[   52.819994] Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x0
[   52.829269] Set_Fh_Bss_Proc rai0 wdev->MAPCfg.DevOwnRole 0x20
[  107.040560] [DfsCacEndUpdate][RDM] CAC end. Enable MAC TX.

共有:

Switch

MAC

U-Boot

Kernel

共有: